PDA

View Full Version : RIFF JTAG Update



Pages : [1] 2

anhtam
03-08-2010, 03:29 PM
03.08.2010 Huawei E1550 Modem

Please download new "Huawei_E1550.dll". There was bug with repair pack, and now its fixed.

huythotnot
03-08-2010, 07:21 PM
RIFF JTAG – HTC Dream Google G1 Unbrick, Unlock, IMEI repair (http://www.jtagbox.com/jtag-news/riff-jtag-htc-dream-google-g1-unbrick-unlock-imei-repair/)


03.08.2010 HTC Dream Google G1 Unbrick, Unlock, IMEI repair.

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“HTC_Dream.dll” contains pinout, repair instructions and required repair files for HTC Dream Google G1 Unbrick, Unlock and IMEI repair.
http://www.jtagbox.com/wp-content/uploads/2010/08/tmobile_g1_google_phone_white.jpg (http://www.jtagbox.com/wp-content/uploads/2010/08/tmobile_g1_google_phone_white.jpg)

NGUYÊNQNGAI
04-08-2010, 08:22 AM
RIFF JTAG – HTC Topaz – Diamond2 Unbrick, Unlock, IMEI repair.


03.08.2010 RIFF JTAG – HTC Topaz – Diamond2 Unbrick, Unlock, IMEI repair.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“HTC_Topaz.dll” contains pinout, repair instructions and required repair files for HTC Topaz – Diamond2 Unbrick, Unlock, IMEI repair.

http://www.jtagbox.com/wp-content/uploads/2010/08/touch_diamond2_2.jpg

thaiduy
17-08-2010, 05:12 AM
16.08.2010 RIFF JTAG HTC Dream, Google G1 Update – added 8 bit bus support (http://www.jtagbox.com/jtag-news/riff-jtag-htc-dream-google-g1-update-added-8-bit-nand-support/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“HTC_Dream.dll” contains pinout, repair instructions and required repair files for HTC Dream Google G1 Unbrick, Unlock and IMEI repair

http://upnhanh.sieuthinhanh.com/tmpimages/images/sieuthiNHANH2010081722833njfhn2q3nw113323.jpeg

anhtam
17-08-2010, 03:03 PM
17.08.2010 RIFF JTAG – Samsung i900 Omnia unbrick, dead boot repair instructions updated (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-i900-omnia-unbrick-instructions-updated/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Samsung_i900_modem.dll” contains pinout, repair instructions and required repair files for Samsung i900 Modem part unbrick, dead boot repair.
“Samsung_i900_PDA.dll” contains pinout, repair instructions and required repair files for Samsung i900 PDA part unbrick, dead boot repair.


http://www.jtagbox.com/wp-content/uploads/2010/08/samsung-i900-omnia-smartphone.jpg (http://www.jtagbox.com/wp-content/uploads/2010/08/samsung-i900-omnia-smartphone.jpg)

yentrang120705
17-08-2010, 03:59 PM
Anh Tâm có thể cho hỏi mua box nầy có kèm cáp gì kg hay chỉ có box thôi,còn JTAG thì tự chế

anhtam
17-08-2010, 04:09 PM
Anh Tâm có thể cho hỏi mua box nầy có kèm cáp gì kg hay chỉ có box thôi,còn JTAG thì tự chế

theo bộ chỉ có cáp để hàn thôi em, mấy cái Jtags dỡ lắm, cuối cùng hàn thẳng vào bo là chắc cú nhất thui :)

anhtam
21-08-2010, 08:32 AM
20.08.2010 ZTE MF100 modem unbrick/repair supported. (http://www.jtagbox.com/jtag-news/riff-jtag-zte-mf100-modem-unbrickrepair/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“ZTE_MF100.dll” contains pinout, repair instructions and required repair files for ZTE MF100 Modem unbrick, dead boot repair.


http://www.jtagbox.com/wp-content/uploads/2010/08/kyivstar-zte-mf-100-3g-modem.jpg (http://www.jtagbox.com/wp-content/uploads/2010/08/kyivstar-zte-mf-100-3g-modem.jpg)

anhtam
25-08-2010, 07:11 AM
24.08.2010 ZTE MF112 modem unbrick/repair supported. (http://www.jtagbox.com/jtag-news/riff-jtag-zte-mf112-modem-unbrickrepair-dead-boot/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.

“ZTE_MF112.dll” contains pinout, repair instructions and required repair files for ZTE MF112 Modem unbrick, dead boot repair.

http://www.jtagbox.com/wp-content/uploads/2010/08/mf112.jpg (http://www.jtagbox.com/wp-content/uploads/2010/08/mf112.jpg)
http://forum.gsmhosting.com/vbb/images/buttons/report.gif (http://forum.gsmhosting.com/vbb/report.php?p=6250032) http://forum.gsmhosting.com/vbb/vbseo/resources/images/forum/digg.gif (http://digg.com/submit?phase=2&url=http%3A%2F%2Fforum.gsmhosting.com%2Fvbb%2Ff475 %2Friff-jtag-zte-mf112-modem-unbrick-repair-dead-boot-1079823%2F%23post6250032&title=RIFF+JTAG+%96+ZTE+MF112+Modem+unbrick%2Frepa ir+dead+boot)http://forum.gsmhosting.com/vbb/vbseo/resources/images/forum/delicious.gif (http://del.icio.us/post?url=http%3A%2F%2Fforum.gsmhosting.com%2Fvbb%2 Ff475%2Friff-jtag-zte-mf112-modem-unbrick-repair-dead-boot-1079823%2F%23post6250032&title=RIFF+JTAG+%96+ZTE+MF112+Modem+unbrick%2Frepa ir+dead+boot)http://forum.gsmhosting.com/vbb/vbseo/resources/images/forum/technorati.gif (http://technorati.com/faves/?add=http%3A%2F%2Fforum.gsmhosting.com%2Fvbb%2Ff47 5%2Friff-jtag-zte-mf112-modem-unbrick-repair-dead-boot-1079823%2F%23post6250032)http://forum.gsmhosting.com/vbb/vbseo/resources/images/forum/furl.gif (http://www.furl.net/storeIt.jsp?u=http%3A%2F%2Fforum.gsmhosting.com%2F vbb%2Ff475%2Friff-jtag-zte-mf112-modem-unbrick-repair-dead-boot-1079823%2F%23post6250032&t=RIFF+JTAG+%96+ZTE+MF112+Modem+unbrick%2Frepair+d ead+boot)http://forum.gsmhosting.com/vbb/vbseo/resources/images/forum/facebook.gif (http://www.facebook.com/share.php?u=http%3A%2F%2Fforum.gsmhosting.com%2Fvb b%2Ff475%2Friff-jtag-zte-mf112-modem-unbrick-repair-dead-boot-1079823%2F%23post6250032)http://forum.gsmhosting.com/vbb/vbseo/resources/images/forum/twitter.png (http://twitter.com/home?status=RIFF+JTAG+%96+ZTE+MF112+Modem+unbrick% 2Frepair+dead+boot%20-%20http%3A%2F%2Fforum.gsmhosting.com%2Fvbb%2Ff475% 2Friff-jtag-zte-mf112-modem-unbrick-repair-dead-boot-1079823%2F%23post6250032)http://forum.gsmhosting.com/vbb/vbseo/resources/images/forum/stumbleit.gif (http://www.stumbleupon.com/submit?url=http%3A%2F%2Fforum.gsmhosting.com%2Fvbb %2Ff475%2Friff-jtag-zte-mf112-modem-unbrick-repair-dead-boot-1079823%2F%23post6250032&title=RIFF+JTAG+%96+ZTE+MF112+Modem+unbrick%2Frepa ir+dead+boot)

anhtam
29-08-2010, 08:55 AM
RIFF JTAG - ZTE MF628 Broadband Modem Unbrick/Repair supported

28.08.2010 ZTE MF628 broadband modem unbrick/repair updated (http://www.jtagbox.com/jtag-news/riff-jtag-zte-mf628-broadband-usb-modem-unbrickrepair-supported/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_MF628.dll” contains pinout, repair instructions and required repair files for ZTE MF628 broadband modem unbrick/repair.

http://www.jtagbox.com/wp-content/uploads/2010/08/ZTEMF628.jpg
__________________________ (http://www.jtagbox.com/wp-content/uploads/2010/08/ZTEMF628.jpg)


28.08.2010 ZTE MF622 broadband modem unbrick/repair updated. (http://www.jtagbox.com/jtag-news/riff-jtag-zte-mf622-unbrickrepair-update/)
- Fixed bug with DCC loader, added help and test point image.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_MF622.dll” contains pinout, repair instructions and required repair files for ZTE MF622 broadband modem unbrick/repair.
http://www.jtagbox.com/wp-content/uploads/2010/08/mf622.jpg (http://www.jtagbox.com/wp-content/uploads/2010/08/mf622.jpg)

anhtam
30-08-2010, 07:02 PM
30.08.2010 - RIFF JTAG Updates

- All broadcom DLL-s are updated, so please download new ones.

Take NOTE !

Samsung GT-S5320M, with flash Chip ID: 0x002C/0x00BA may NOT WORK after repair ! If You have such phone in working condition, please read FULL BACKUP and contact me.

To check firmware version, type the *#1234#. Firmware version we need is S523MMSJF

- Samsung S8320 PDA BETA TEST DLL is available.

Pinout is attached below.

http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=242855&stc=1&d=1283169321

huythotnot
31-08-2010, 07:08 PM
31.08.2010 Samsung WAVE S8500 Unbrick/Repair boot beta support
This is beta test, and it is not available trough “Check for updates” button.

http://www.jtagbox.com/wp-content/uploads/2010/08/samsung-wave.jpg (http://www.jtagbox.com/wp-content/uploads/2010/08/samsung-wave.jpg)
What You need to repair it ? (http://forum.gsmhosting.com/vbb/f634/beta-test-thread-samsung-wave-s8500-repair-here-1084627/)
- RIFF Box
- Micro USB Cable
- Full charged battery (4.2v)
- CMM + ELF (http://www.jtagbox.com/downloads/8500/Trace32.rar)
- Samsung_S8500_PDA.dll (http://www.jtagbox.com/downloads/8500/Samsung_S8500_PDA.zip)
- Pinout (http://www.jtagbox.com/downloads/8500/S8500.jpg)
- Multiloader
- USB Drivers
- Firmware files
Procedure:
- Solder RIFF JTAG cable (use very thin wires for PCB, because of battery)
- Insert battery
- Connect Micro USB cable to phone and PC port
- Start the JTAG Manager and select Samsung S8500 PDA from the list
- Switch to “DCC Read/Write” TAB
- Set everything as on photo bellow:
http://www.jtagbox.com/downloads/8500/S8500-step1.jpg
- Press “Read memory” and wait to be finished
- Now switch to “JTAG Read/Write” TAB and press “Connect&Get ID” then “Halt the Target” buttons
- Click “Execute Script” and select CMM file
- Press “Run Script” button
http://www.jtagbox.com/downloads/8500/S8500-step2.jpg
- Ram loader will be uploaded and after its uploaded, phone will automaticaly enter download mode, and detected by PC
- IMPORTANT ! ! ! Now You must disconnect JTAG Cable from RIFF Box
- Start Multiloader 5.62, set “Boot change” and select Boot files folder
- Press download – and wait for process to be finished
- Now phone contains valid bootloader, and can be flashed, so You can desolder JTAG wires from PCB
To enter download mode hold LOCK+Volume Down + Power on Keys.
Problems which You may have:

- Target not detected – check all wires and tp, check battery, 4.2v is a MUST !
- Wrong DCC answer – low battery, or TCK too high, You can use 100KHz TCK too !
- “It not work” – no idea about this lol http://forum.gsmhosting.com/ubb/biggrin.gif

lyducquyen
01-09-2010, 09:02 AM
31.08.2010 RIFF JTAG update:



Samsung i550 PDA DLL updated
Samsung i450 PDA DLL updated
Samsung i900 PDA DLL updated

In some cases additional areas of PDA memory need to be repaired, and this update brings this new feature.

Samsung WAVE S8500 repair available for test also. http://forum.gsmhosting.com/ubb/smile.gif

trangthanh-386
03-09-2010, 06:40 PM
RIFF JTAG – Samsung I5700 Galaxy Lite Unbrick/Repair dead boot supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-i5700-galaxy-lite-unbrickrepair-dead-boot-supported/)

02.09.2010 Samsung I5700 Galaxy Lite Unbrick/Repair dead boot supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i5700_PDA.dll” contains pinout, repair instructions and required files for single click Samsung I5700 Galaxy Lite Unbrick/Repair dead boot.
http://www.jtagbox.com/wp-content/uploads/2010/09/SamsungI5700Galaxy.jpg (http://www.jtagbox.com/wp-content/uploads/2010/09/SamsungI5700Galaxy.jpg)

RIFF JTAG – Samsung WAVE S8500 Single Click Unbrick/repair boot (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-wave-s8500-single-click-unbrickrepair-boot/)


02.09.2010 Samsung WAVE Single Click Unbrick/Repair dead boot released

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_S8500.dll” contains pinout, repair instructions and required files for single click Samsung WAVE S8500 Unbrick/Repair dead boot.
http://www.jtagbox.com/wp-content/uploads/2010/09/samsung-wave.jpg (http://www.jtagbox.com/wp-content/uploads/2010/09/samsung-wave.jpg)





RIFF JTAG – HTC HD2 LEO Direct Unlock added (http://www.jtagbox.com/jtag-news/riff-jtag-htc-hd2-leo-direct-unlock-added/)


02.09.2010 HTC HD2 LEO Direct Unlock supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_HD2.dll” contains pinout, repair instructions and required repair files for direct HTC HD2 LEO unlock, unbrick and IMEI repair.
http://www.jtagbox.com/wp-content/uploads/2010/09/HTC-HD2.jpg (http://www.jtagbox.com/wp-content/uploads/2010/09/HTC-HD2.jpg)



RIFF JTAG – Samsung GT-S5230 Hello Kitty Unbrick/Repair dead boot (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-gts5230-kitty-unbrickrepair-dead-boot/)


02.09.2010 Samsung GT-S5230 Hello Kitty Unbrick/Repair dead boot released
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_S5230.dll” contains pinout, repair instructions and required repair files for all versions of GT-S5230 Samsung (M, W, T, Hello Kitty)
http://www.jtagbox.com/wp-content/uploads/2010/09/Samsung-Star-S5230-Hello-Ki.gif (http://www.jtagbox.com/wp-content/uploads/2010/09/Samsung-Star-S5230-Hello-Ki.gif)





RIFF JTAG – JTAG Manager v1.14 released (http://www.jtagbox.com/jtag-news/riff-jtag-jtag-manager-v114-released/)

02.09.2010 JTAG Manager v1.14 released
Whats new:
JTAG Manger 1.14
———————
- Increased internal buffers size to support NAND devices with 4KB/256KB Page/Block size which makes possible now to run Samsung S8500 fully functional resurrector;
- Added OneNAND 2K/4K pages size selection for DCC Loader setup in Custom Target Settings mode; (make sure you use latest OneNAND standalone DCC loaders; old OneNAND loaders may not start on the 1.14 JTAG Manager version);
- Fixed: now OneNAND settings (in DCC Loader Settings) are not discarded to defaults on next software startup.
- Improved presets loading sequence; – (SDK): exported new SUB_ID_SET_JTAG_SPEED function for resurrectors; Please click “Check for updates” button to download new version.

huythotnot
04-09-2010, 12:37 AM
03.09.2010 HTC Desire Unlock, Unbrick, IMEI repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-htc-desire-unlock-unbrick-imei-repair-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Desire.dll” contains pinout, repair instructions and required files for single click HTC Desire Unlock, Unbrick, IMEI repair.


http://www.jtagbox.com/wp-content/uploads/2010/09/htc-desire.jpg (http://www.jtagbox.com/wp-content/uploads/2010/09/htc-desire.jpg)

NoName
07-09-2010, 10:18 PM
Here is how You can fix i8510 PDA part using RIFF Box and CMM script.

- Set model to Samsung i550 PDA
- Connect i8510 PDA pins to RIFF JTAG Box
- Start the JTAG Manager
- Switch to DCC Read/Write TAB
- Select ROM1
- Set the address to "0x00000000"
- Set the Data Length to "0x00008000"
- Click "Read mem", when finished move to JTAG TAB
- Click "Connect&Get ID"
- Click HALT
- Click Execute CMM Script, and select "primera.cmm"
- Press "Run Script" button
- Your phone PDA will be updated with boot files

Now, disconnect cables and enter PDA download mode using 1+4+power buttons, reflash the PDA with original flasher.

Here is CMM package (http://rapidshare.com/files/417641952/MultiROFS.rar.html).

anhtam
11-09-2010, 05:32 PM
RIFF JTAG – Samsung i8510 Unbrick/Repair dead PDA boot supported
11.09.2010 Samsung i8510 Unbrick/Repair dead boot supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-i8510-unbrickrepair-dead-boot-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i8510_PDA.dll” contains pinout, repair instructions and required files for single click Samsung I8510 Innov8 Unbrick/Repair dead PDA part boot.


http://www.jtagbox.com/wp-content/uploads/2010/09/samsung-i8510-innov81.jpg (http://www.jtagbox.com/wp-content/uploads/2010/09/samsung-i8510-innov81.jpg)

Nhất Vũ
12-09-2010, 06:57 AM
RIFF JTAG - Samsung M8910, i8320 unbrick/repair supported
11.09.2010 Samsung i8320 modem part Unbrick/repair supported
(http://www.jtagbox.com/jtag-news/riff-jtag-samsung-i8320-modem-part-unbrickrepair-supported/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i8320_mdm.dll” contains required repair files for i8320 modem part.

http://www.jtagbox.com/wp-content/uploads/2010/09/i8320.jpg (http://www.jtagbox.com/wp-content/uploads/2010/09/i8320.jpg)

11.09.2010 Samsung m8910 Unbrick/repair dead boot supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-m8910-unbrickrepair-dead-boot-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_m8910.dll” contains required files for unbrick/repair bricked Samsung m8910.



Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_m8910.dll” contains required files for unbrick/repair bricked Samsung m8910.


http://www.jtagbox.com/wp-content/uploads/2010/09/samsung-m8910-pixon12-pictures-1.jpg (http://www.jtagbox.com/wp-content/uploads/2010/09/samsung-m8910-pixon12-pictures-1.jpg)[/LEFT]ir bricked Samsung m8910.

tommyhaohoa
12-09-2010, 08:54 AM
liên tục update nhưng máy ít lỗi pan này.pùn thế

Nhất Vũ
15-09-2010, 05:45 PM
15.09.2010 Samsung S3370 Unbrick/Repair bricked phones supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_S3370.dll” contains pinout, repair instructions and required files for single click Samsung S3370 Unbrick/Repair dead boot.
http://www.jtagbox.com/wp-content/uploads/2010/09/samsung-s3370_04.jpg (http://www.jtagbox.com/wp-content/uploads/2010/09/samsung-s3370_04.jpg)

15.09.2010 Samsung C5510 Unbrick/Repair DLL Update
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_C5510.dll” contains required files for unbrick/repair bricked Samsung C5510.


Important !

This is updated DLL with Interface Pinout, and updated DCC loader for some new board revisions.

http://www.jtagbox.com/wp-content/uploads/2010/09/c5510.jpg (http://www.jtagbox.com/wp-content/uploads/2010/09/c5510.jpg)

thienkhang
15-09-2010, 05:48 PM
15.09.2010 Samsung S3370 Unbrick/Repair bricked phones supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_S3370.dll” contains pinout, repair instructions and required files for single click Samsung S3370 Unbrick/Repair dead boot.
http://www.jtagbox.com/wp-content/uploads/2010/09/samsung-s3370_04.jpg

(http://www.jtagbox.com/wp-content/uploads/2010/09/samsung-s3370_04.jpg)

15.09.2010 Samsung C5510 Unbrick/Repair DLL Update
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_C5510.dll” contains required files for unbrick/repair bricked Samsung C5510.
http://www.jtagbox.com/wp-content/uploads/2010/09/c5510.jpg (http://www.jtagbox.com/wp-content/uploads/2010/09/c5510.jpg)

anhtam
16-09-2010, 07:37 AM
RIFF JTAG – Samsung Galaxy S i9000 Unbrick/repair bricked boot 15.09.2010 Samsung Galaxy S – i9000 unbricking supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-i9000-unbrickrepair-bricked-boot/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Samsung_i9000.dll” contains pinout, repair instructions and required files for single click Samsung Galaxy S – i9000 Unbrick/Repair bricked boot.

http://www.jtagbox.com/wp-content/uploads/2010/09/Samsung-I9000-Galaxy-Reviews.jpg (http://www.jtagbox.com/wp-content/uploads/2010/09/Samsung-I9000-Galaxy-Reviews.jpg)

Quamobile_GSM
20-09-2010, 04:48 PM
RIFF JTAG Update - HTC Desire with SLCD Display Update ! ! ! 20.09.2010 - HTC Desire new revision boards supported!

Whats new:



Added optional selection for SPL versions
Added direct Unlock function without SPL reflashing

As already noted before, the HTC Desire is being shipped now with SLCD display type, instead of previous AMOLED.
Now You can chose SPL version to be used, 0.80.0000, or 0.92.0007. Latest SPL supports both display types, but at the moment this SPL isn't rooted as we know.

Here is how it works now:

http://www.jtagbox.com/downloads/desire-spl.jpg

If You want just to repair the SPL, Untick the IMEI and HTC Partition check boxes.
If phone IMEI or eeprom is damaged, You need to tick the HTC Partition and IMEI check boxes, and of course fill out the desired IMEI.

If You just want to unlock phone, without any other changes, select "Unlock Settings" TAB and press "Unlock" button:

http://www.jtagbox.com/downloads/desire-unlock.jpg

This function will unlock the phone without touching any other memory part.

Nhất Vũ
22-09-2010, 06:21 PM
22.09.2010 HTC Nexus One Unlock/Unbrick/IMEI Repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-htc-nexus-unlockunbrickimei-repair-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“HTC_Nexus.dll” contains pinout, repair instructions and required files for single click HTC Nexus One Unlock, Unbrick, IMEI repair.

http://www.jtagbox.com/wp-content/uploads/2010/09/HTC_nexus.jpg (http://www.jtagbox.com/wp-content/uploads/2010/09/HTC_nexus.jpg)

huythotnot
24-09-2010, 06:10 PM
24.09.2010 Huawei E220 Broadband modem unbrick/repair dead boot (http://www.jtagbox.com/jtag-news/riff-jtag-huawei-e220-broadband-mode-unbrickrepair-dead-boot/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Huawei_E220.dll” contains pinout, repair instructions and required files for single click Huawei E220 broadband modem unbrick/repair dead boot and firmware damages.


http://www.jtagbox.com/wp-content/uploads/2010/09/HuaweiE220.com_.jpg (http://www.jtagbox.com/wp-content/uploads/2010/09/HuaweiE220.com_.jpg)

anhtam
30-09-2010, 05:48 PM
How to unlock Toshiba TG01 Tsunagi:

For now, it is possible to simply clone unlocked EFS. This will unlock phone, but also will change IMEI and all calibrations! ! !

You may need to recalibrate touch panel after uploading EFS to phone.

Procedure:
- Start the JTAG Manager, and select HTC HD2 DLL
- Switch to DCC Read/Write TAB, and select ROM1 address space, tick "Auto FullFlash Size"
- Press "Read Memory"
- After reading is finished, press "Save" and enter desired name for Your phone full backup. Now You have full backup which You can restore any time.
_____

- Open "EFS.bin"
- Set the data address and length as on image
- Set the correct options as on image
- Press "Write Flash"
- After its finished, You can assemble the phone and test its functions

http://www.jtagbox.com/downloads/tg01/EFS_Settings.jpg

Requirements:

TG01 Pinout (http://jtagbox.com/downloads/tg01/tsunagi%20riff%20pinout.jpg)
TG01 Unlocked EFS (http://jtagbox.com/downloads/tg01/Unlocked_EFS.rar)

GND is routed to pin 10 on above pinout. It is enough to connect just Micro USB cable to PC USB port phone PCB, battery is not required.

anhtam
05-10-2010, 07:44 PM
05.10.2010 JTAG Manager v1.15, RIFF Box firmware v1.14 released

Whats new:

Firmware 1.14
---------------------
- code is optimized to avoid deadlocks in Cortex-A8 handling routines (deadlocks appear due to communication errors);
- Cortex-A8 debug is now available in ARM/Thumb modes (use the GDBServer for this);
- ARM946E core support is added (which is mostly a debug access to the CP15 coprocessor);
- added new RESET type for ARM9xxx cores: HW_RESET - targets which have dedicated TRST can be halted
at the very first instruction core executes after the system reset signal (NRST) was applied.
Importance of this: if some harmfull/"unlucky" code is written to a boot zone of a device, which (code)
on the device startup results in h/w blocking, jtag disabling, core resetting, etc., then connecting via JTAG to such target
becomes an impossible task, since JTAG host has not enough time to halt the target before it becomes unusable by a harmfull code.
Using HW_RESET type ensures the target's core does not execute even a single instruction after the reset signal (NRST) was applied.
- removed bug which could cause deadlocks of box during a h/w script execution.
____________
JTAG Manager 1.15
---------------------
- added extended flash chip info handling for example for NOR memories support by DCC Loaders;
- added Resume feature for interrupted writes (which could be performed by WriteMemory button (DCC Page) or by Resurrector DLL):
if target loses power, connection is broken or any other malfuntion happens during write operation, software will store current
write context; you can reconnect target and start write/resurrection again - software will prompt you whether to start again or to continue write from the
interrupted point. This feature is applicable to all write conditions (writes by resurrectors, or manual writes through the DCC Read/Write page features).
- added 3 buttons on Box Service page for quick access to the RIFF's manual PDFs;
- fixed a not harmfull bug inside of the core reset (when NRST is applied) command sequence;
- added feature: if write error appears and 'Ignore' is choosen, user can order software to apply 'Ignore' for further write errors automatically;
- added standalone setup dialog for automatic write errors handling;
- added BAD Blocks Handling feature using the following algo:
If there are data chunks A B C & D to be written into blocks 1 2 3 & 4 respectively, and for example block 3 is found to be BAD, then software will write:
data A -> into block 1
data B -> into block 2
--------> block 3 is bypassed (and marked as bad)
data C -> into block 4
data D -> into block 5
It's clear that block 5 was not intended to accept the data D. Thus:
- if block 5 had some other info then this info will be lost and will be overwritten with the data D.
- if block 5 was free for use, then nothing bad happens.

So, main conclusions:
---------------------
1. BAD Blocks Handling is IMPOSSIBLE (POINTLESS) for writting FULL images (user can chose only 'Ignore' option)
2. When writting data chunks of length less than full flash size user is prompted to select 2 options:
a) Overlap (in example above this would mean to write data D into block 5)
b) Cut Excess (in example above this would mean to not touch original 5th block's contents and just discard data D to be written)

************************************************** ************************************************** *********************************
NOTE: Bad block handling is allowed by default only through the DCC Read/Write page write.
----- Old Resurrector DLLs were not adapted for this feature, thus Bad Block handling will be implemented only in new DLLs.
If you meet a Bad Block Error during resurrection contact support in order to update DLL to a Bad Blocks adapted version.
************************************************** ************************************************** *********************************

- solved problem which caused update module to display files for download which were already up-to-date for cases
when JTAG Manager was installed on FAT (FAT/FAT32) file systems.
- very dangerous bug fixed: "Irnored" word misspelling is corrected to the valid "Ignored" one

anhtam
06-10-2010, 07:21 AM
RIFF JTAG Update - ROM2 Support for HTC Desire and HTC Magic 32 05.10.2010 HTC Desire and HTC Magic32 (A and B versions) DLL updates

Whats new:

- Bad blocks handling in HTC Desire DLL
- ROM2 mapping in HTC Desire and HTC Magic
- Android style support in ECC handling (0x204 byte per page)

Please start the JTAG Manager, and click "Check for Updates" button to download new DLL-s.

anhtam
06-10-2010, 07:00 PM
RIFF JTAG – Huawei broadband modem E170/E172 unbrick supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_E17x.dll” contains pinout, repair instructions and required files for single click Huawei E170/E172 broadband modem unbrick/repair dead boot and firmware damages.



http://www.jtagbox.com/wp-content/uploads/2010/10/gsm-modem-huawei-e170-t-mobile-0.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/gsm-modem-huawei-e170-t-mobile-0.jpg)

anhtam
06-10-2010, 10:30 PM
06.10.2010 Huawei Broadband Modem E585 unbrick supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_E585.dll” contains pinout, repair instructions and required files for single click Huawei E585 broadband modem unbrick/repair dead boot and firmware damage

anhtam
07-10-2010, 07:10 PM
07.10.2010 Huawei Broadband modem E169 Unbrick/Repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_E169.dll” contains pinout, repair instructions and required files for single click Huawei E169 broadband modem unbrick/repair dead boot and firmware damages.
http://www.jtagbox.com/wp-content/uploads/2010/10/E169-K3250-300x190.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/E169-K3250-300x190.jpg)

klmobile198
08-10-2010, 06:18 AM
07.10.2010 HTC Touch HD Unbrick, Unlock, IMEI Change, CID Change supported (http://www.jtagbox.com/jtag-news/riff-jtag-htc-touch-hd-unbrick-unlock-imei-change-cid-change-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“HTC_HD.dll” contains pinout, repair instructions and required files for single click HTC Touch HD Unbrick, Unlock, IMEI Change, CID Change and Model ID repair.

http://www.jtagbox.com/wp-content/uploads/2010/10/htc-touch-hd.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/htc-touch-hd.jpg)

klmobile198
09-10-2010, 08:12 PM
09.10.2010 CDMA Huawei C2806m Unbrick/Repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-huawei-c2806m-unbrickrepair-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.


“Huawei_C2806M.dll” contains pinout, repair instructions and required files for single click CDMA Huawei C2806m mobile phone unbrick/repair.


http://www.jtagbox.com/wp-content/uploads/2010/10/hwt1248834092.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/hwt1248834092.jpg)

Tấn Thanh
10-10-2010, 05:37 AM
RIFF JTAG - CDMA Huawei C2901M Unbrick/Repair supported
09.10.2010 CDMA Huawei C2901M Unbrick/Repair supported (http://www.jtagbox.com/jtag-news/cdma-huawei-c2901m-unbrickrepair-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.


“Huawei_C2901M.dll” contains pinout, repair instructions and required files for single click CDMA Huawei C2901m mobile phone unbrick/repair.

http://www.jtagbox.com/wp-content/uploads/2010/10/TI-huawei_c2901_bg.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/TI-huawei_c2901_bg.jpg)

Nhất Vũ
11-10-2010, 04:48 PM
RIFF JTAG - ZTE MF170 Broadband modem Unbrick/Repair supported
11.10.2010 ZTE MF170 Broadband modem Unbrick/Repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-zte-mf170-broadband-modem-unbrickrepair-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“ZTE_MF170.dll” contains pinout, repair instructions and required repair files for ZTE MF170 broadband modem unbrick/repair.


http://www.jtagbox.com/wp-content/uploads/2010/10/mf170.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/mf170.jpg)

klmobile198
13-10-2010, 05:31 PM
13.10.2010 HTC Mega Touch2 Unlock,Unbrick, IMEI Change, CID Change supported (http://www.jtagbox.com/jtag-news/riff-jtag-htc-mega-touch2-unlockunbrick-imei-change-cid-change-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“HTC_Mega.dll” contains pinout, repair instructions and required files for single click HTC Touch2 Mega Unbrick, Unlock, IMEI Change, CID Change and Model ID repair.


http://www.jtagbox.com/wp-content/uploads/2010/10/htc-touch2-mega.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/htc-touch2-mega.jpg)

klmobile198
13-10-2010, 06:14 PM
13.10.2010 HTC HD2 LEO CID Change and Unlock update (http://www.jtagbox.com/jtag-news/riff-jtag-htc-hd2-leo-cid-change-unlock-update/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_HD2.dll” contains pinout, repair instructions and required repair files for direct HTC HD2 LEO unlock, unbrick, IMEI repair and CID Change.


http://www.jtagbox.com/wp-content/uploads/2010/09/HTC-HD2.jpg (http://www.jtagbox.com/wp-content/uploads/2010/09/HTC-HD2.jpg)

huythotnot
14-10-2010, 07:20 PM
14.10.2010 Samsung i740 Modem and PDA Unbrick-Repair dead boot supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-i740-modem-pda-unbrick-repair-dead-boot-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Samsung_i740_mdm.dll” contains pinout, instructions and required repair files for i740 and i728 modem part.
“Samsung_i740_PDA.dll” contains pinout, instructions and required repair files for i740 and i728 PDA part.


http://www.jtagbox.com/wp-content/uploads/2010/10/sam_i740_5.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/sam_i740_5.jpg)

klmobile198
14-10-2010, 07:37 PM
14.10.2010 RIFF JTAG Manager v1.17 released

Whats new :



Addedd chip size information handling for NOR memories
Improved erase operation in case DCC Loader operates with a NOR memory.
Implemented ResBreak option (SYSTEM.OPTION RESBREAK ON|OFF) in the Trace32 CMM execution engine
Added PROBE feature - Detection of JTAG Pins ! ! !

Probing function work via Pin 6 on RJ45 Port :

http://www.jtagbox.com/downloads/manuals/riffbox_pinout.jpg

Advanced users should read the probing manual from here. (http://www.jtagbox.com/downloads/manuals/JTAG_Signals_Probing.pdf)

Probe dialog example :

http://www.jtagbox.com/downloads/manuals/probing.jpg


_____________________________

RIFF Box firmware v1.15 :

- Probe (JTAG Pins detection) feature added

sơntâyninh
14-10-2010, 10:19 PM
RIFF JTAG – HTC Imagio WhiteStone Unlock, Imei Change, Unbrick, CID Change supported

14.10.2010 HTC Imagio WhiteStone Unlock, Imei Change, Unbrick, CID Change supported (http://www.jtagbox.com/jtag-news/riff-jtag-htc-imagio-whitestone-unlock-imei-change-unbrick-cid-change-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.


“HTC_Imagio.dll” contains pinout, repair instructions and required repair files for direct HTC Imagio WhiteStone unlock, unbrick, IMEI repair and CID Change.



http://www.jtagbox.com/wp-content/uploads/2010/10/HTC-Imagio.png (http://www.jtagbox.com/wp-content/uploads/2010/10/HTC-Imagio.png)

klmobile198
16-10-2010, 08:16 PM
16.10.2010 RIFF Box JTAG Manager 1.18

Whats new:


Further improved updates displaying when JTAG Manager is installed on FAT/FAT32 file systems
Fixed bug which caused PDF buttons (on Box Service page) to stay disabled after first restart of JTAG Manager when a correspondant PDF was downloaded for a first time.

Please click "Check for Updates" button in order to download new files.

klmobile198
17-10-2010, 08:11 PM
17.10.2010 HTC Snap-Maple120 Unlock/Unbrick/IMEI Change/CID Change supported
(http://www.jtagbox.com/jtag-news/riff-jtag-htc-snap-maple120-unlock-unbrick-imei-change-cid-change-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“HTC_snap.dll” contains pinout, repair instructions and required repair files for direct HTC Snap Maple120 unlock, unbrick, IMEI repair and CID Change.


http://www.jtagbox.com/wp-content/uploads/2010/10/htc_snap_2.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/htc_snap_2.jpg)

Nhất Vũ
18-10-2010, 06:58 PM
18.10.2010 Samsung i560 Unbrick/Repair dead boot supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-i560-unbrick-repair-dead-boot-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.


“Samsung_i560_mdm.dll” contains pinout, instructions and required repair files for i740 and i728 modem part.

“Samsung_i560_PDA.dll” contains pinout, instructions and required repair files for i740 and i728 PDA part.


http://www.jtagbox.com/wp-content/uploads/2010/10/samsung-i560.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/samsung-i560.jpg)

klmobile198
18-10-2010, 09:47 PM
18.10.2010 HTC Tattoo – HTC Click100 Unlock, Unbrick, IMEI Change, CID Change supported
(http://www.jtagbox.com/jtag-news/htc-tattoo-htc-click100-unlock-unbrick-imei-change-cid-change-supported/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“HTC_Tattoo.dll” contains pinout, repair instructions and required repair files for direct HTC Tatto – HTC Click100 unlock, unbrick, IMEI repair and CID Change.


http://www.jtagbox.com/wp-content/uploads/2010/10/htc_tattoo_2.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/htc_tattoo_2.jpg)

klmobile198
18-10-2010, 09:48 PM
18.10.2010 HTC Touch Pro2 T7373 (HTC Rhodium 100) Unlock, Unbrick, IMEI Change, CID Change supported
(http://www.jtagbox.com/jtag-news/riff-jtag-htc-touch-pro2-t7373-htc-rhodium-100-unlock-unbrick-imei-change-cid-change-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.


“HTC_rhodium.dll” contains pinout, repair instructions and required repair files for direct TC Touch Pro2 T7373 (HTC Rhodium 100) Unlock, Unbrick, IMEI Change, CID Change.



http://www.jtagbox.com/wp-content/uploads/2010/10/htc_touch_pro2_2.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/htc_touch_pro2_2.jpg)

klmobile198
18-10-2010, 09:48 PM
18.10.2010 HTC Dash Unlock, Unbrick, IMEI Change, CID Change supported

(http://www.jtagbox.com/jtag-news/htc-dash-unlock-unbrick-imei-change-cid-change-supported/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.


“HTC_dash.dll” contains pinout, repair instructions and required repair files for direct HTC Dash 3G Unlock, Unbrick, IMEI Change, CID Change.


http://www.jtagbox.com/wp-content/uploads/2010/10/t-mobile-htc-3g-dash-released.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/t-mobile-htc-3g-dash-released.jpg)

klmobile198
19-10-2010, 06:21 AM
18.10.2010 Samsung T959 Vibrant Galaxy S Unbrick bricked boot supported
(http://www.jtagbox.com/jtag-news/riff-jtag-samsung-t959-vibrant-galaxy-s-unbrick-bricked-boot-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.


“Samsung_t959.dll” contains pinout, repair instructions and required files for single click Samsung Vibrant Galaxy S – T959 Unbrick/Repair bricked boot.


http://www.jtagbox.com/wp-content/uploads/2010/10/Samsung-t959.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/Samsung-t959.jpg)

klmobile198
19-10-2010, 06:23 AM
19.10.2010 HTC Niki – HTC Touch Dual Unlock, Unbrick, IMEI Change, CID Change supported

(http://www.jtagbox.com/jtag-news/htc-****-htc-touch-dual-unlock-unbrick-imei-change-cid-change-supported/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.


“HTC_Niki.dll” contains pinout, repair instructions and required repair files for direct HTC Niki – HTC Touch Dual Unlock, Unbrick, IMEI Change, CID Change.



http://www.jtagbox.com/wp-content/uploads/2010/10/htc_niki.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/htc_niki.jpg)

klmobile198
19-10-2010, 06:35 AM
19.10.2010 HTC Raphael – HTC Touch Pro T7272 Unlock, Unbrick, IMEI Change, CID Change supported (http://www.jtagbox.com/jtag-news/riff-jtag-htc-raphael-htc-touch-pro-t7272-unlock-unbrick-imei-change-cid-change-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.


“HTC_raphael.dll” contains pinout, repair instructions and required repair files for direct HTC Raphael – HTC Touch Pro T7272 Unlock, Unbrick, IMEI Change, CID Change.


http://www.jtagbox.com/wp-content/uploads/2010/10/htc-raphael.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/htc-raphael.jpg)

klmobile198
21-10-2010, 06:00 AM
20.10.2010 RIFF JTAG Manager 1.19 released

Whats new:



Added feature to temprorarily switch off Device ID check for DCC Read/Write page's operations thus it makes possible to test yet not supported board to be compatible with one of existent DLLs.

For this: when "Resurrector Settings" is active, the DCC Loader Settings button is transformed into 'Special Settings' button. Click it to setup the ID checking on or off. This setting is discarded to "ID Check ON" on each startup of JTAG Manager.




Fixed bug which caused 'Data Length' label not to be changed to 'End Address' upon the JTAG Manager startup when the "Use End Address not Length" box was checked;




Added hint messages for inexperienced users: short hints about how to solve a problem will popup if some JTAG communication error is encountered for Advanced users there is option to switch off such hints.



Added feature to Forcefully display the Resurrection Manual window prior the Resurrection operation for inexperienced users for Advanced users there is option to switch off this feature.

Please click "Check for Updates" button to download latest update.

Nhất Vũ
21-10-2010, 10:23 PM
21.10.2010 Samsung CDMA i910 Omnia Unbrick, dead boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-cdma-i910-omnia-unbrick-dead-boot-repair-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Samsung_i910_PDA.dll” contains pinout, instructions and required repair files for Samsung CDMA i910 Omnia Unbrick, dead boot repair.

http://www.jtagbox.com/wp-content/uploads/2010/10/Omnia_910.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/Omnia_910.jpg)

klmobile198
22-10-2010, 04:49 AM
21.10.2010 HTC Jade (HTC Touch 3G T3232) Unlock, Unbrick, IMEI Change, CID Change supported (http://www.jtagbox.com/jtag-news/htc-jade-htc-touch-3g-t3232-unlock-unbrick-imei-change-cid-change-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Jade.dll” contains pinout, instructions and required repair files for HTC Jade (HTC Touch 3G T3232) Unlock, Unbrick, IMEI Change, CID Change.


http://www.jtagbox.com/wp-content/uploads/2010/10/htc-jade-touch-3g-brown-x-2.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/htc-jade-touch-3g-brown-x-2.jpg)


21.10.2010 SE Xperia X1 (HTC Kovalsky) Unbrick, Unlock, IMEI Change, Model ID repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-se-xperia-x1-htc-kovalsky-unbrick-unlock-imei-change-model-id-repair-supported/)



Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.


“SE_X1.dll” contains pinout, instructions and required repair files for SE Xperia X1 (HTC Kovalsky) Unbrick, Unlock, IMEI Change, Model ID repair.



http://www.jtagbox.com/wp-content/uploads/2010/10/XperiaX1.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/XperiaX1.jpg)


21.10.2010 Samsung S5510 Unbrick, dead boot repair supported

(http://www.jtagbox.com/jtag-news/riff-jtag-samsung-s5510-unbrick-dead-boot-repair-supported/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_s5510.dll” contains pinout, instructions and required repair files for Samsung S5510 Unbrick, dead boot repair.


http://www.jtagbox.com/wp-content/uploads/2010/10/SAMSUNG_S5510_ruby_red_Baltic_sea_jpg_1.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/SAMSUNG_S5510_ruby_red_Baltic_sea_jpg_1.jpg)

Nhất Vũ
22-10-2010, 05:47 PM
22.10.2010 Huawei E160 Broadband modem unbrick, IMEI Change supported (http://www.jtagbox.com/jtag-news/riff-jtag-huawei-e160-e160g-broadband-modem-unbrick-imei-change-supported/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Huawei_E160.dll” contains pinout, repair instructions and required files for single click Huawei E160 broadband modem unbrick, IMEI Change, boot, AMSS,EFS, MMC, OEMInfo reflash.
“Huawei_E160G.dll” contains pinout, repair instructions and required files for single click Huawei E160G broadband modem unbrick, IMEI Change, boot, AMSS,EFS, MMC, OEMInfo reflash.


http://www.jtagbox.com/wp-content/uploads/2010/10/huawei-e160.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/huawei-e160.jpg)

lythaihieu
22-10-2010, 08:43 PM
quê em ít máy quá chứ không cũng làm 1 quả về chíc choác cho sướng tay. hehe

sơntâyninh
22-10-2010, 08:47 PM
RIFF JTAG - HTC Touch P3452 - HTC Elfin Ubrick - Boot repair supported

22.10.2010 HTC Touch P3452 – HTC Elfin Ubrick – Boot repair supported

(http://www.jtagbox.com/jtag-news/htc-touch-p3452-htc-elfin-ubrick-boot-repair-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Elf.dll” contains pinout, instructions and required repair files for HTC Touch P3452 – HTC Elfin unbrick/bootloader restore.


http://www.jtagbox.com/wp-content/uploads/2010/10/htc_touch_enhanced.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/htc_touch_enhanced.jpg)

huythotnot
25-10-2010, 05:18 PM
25.10.2010 HTC Legend A6363 Unlock, Unbrick, IMEI Change, CID Change supported (http://www.jtagbox.com/jtag-news/riff-jtag-htc-legend-a6363-unlock-unbrick-imei-change-cid-change-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“HTC_Legend.dll” contains pinout, instructions and required repair files for HTC Legend A6363Unlock, Unbrick, IMEI Change, CID Change.

Big thanks to Jodge and RIFF JTAG Pin Detection feature ! http://forum.gsmhosting.com/ubb/biggrin.gif (http://forum.gsmhosting.com/ubb/biggrin.gif)


http://www.jtagbox.com/wp-content/uploads/2010/10/htc-legend-philippines.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/htc-legend-philippines.jpg)

klmobile198
26-10-2010, 06:06 AM
Hi,
Here is simple manual to repair bricked Samsung Captivate i897 with RIFF Box:

1. Connect Your phone PCB to RIFF Box using this pinout :

http://www.jtagbox.com/downloads/manuals/i897/i897_pinout.jpg


2. Read the full flash backup, using these settings :

http://www.jtagbox.com/downloads/manuals/i897/read_full_flash_backup.jpg

3. Save the file after reading is finished
4. Download boot (http://www.jtagbox.com/downloads/manuals/i897/Working_Boot_Files.rar)files from here and unpack it.
5. Open "boot_ok_ i897.bin" and write it using these settings :

http://www.jtagbox.com/downloads/manuals/i897/pbl_boot_i897.jpg

6. Open "sbl_i897.bin" and write it using these settings :

http://www.jtagbox.com/downloads/manuals/i897/Sbl_i897.jpg

7. Now assemble phone, press both volume buttons, insert battery and connect USB cable to phone and PC

8. You have download mode enabled, and You can flash phone using Odin and firmware file.


______________________________________

This is just temporary solution, but if You are in hurry, You can use it.
We will soon release Single Click (tm) solution for RIFF Box users.

klmobile198
27-10-2010, 07:31 PM
27.10.2010 Samsung i897 Captivate Galaxy S Unbrick, Dead boot repair, Download mode activation supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-i897-captivate-galaxy-unbrick-dead-boot-repair-download-mode-activation-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Samsung_i897.dll” contains pinout, instructions and required repair files for Samsung i897 Captivate Galaxy S Unbrick, Dead boot repair and Download mode activation.


http://www.jtagbox.com/wp-content/uploads/2010/10/Samsung-i897-Captivate.png (http://www.jtagbox.com/wp-content/uploads/2010/10/Samsung-i897-Captivate.png)

klmobile198
29-10-2010, 05:44 PM
29.10.2010 Samsung t669 Gravity Unbrick, Dead boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-t669-gravity-unbrick-dead-boot-repair-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Samsung_t669.dll” contains pinout, instructions and required repair files for Samsung t669 Gravity Unbrick, Dead boot repair.


http://www.jtagbox.com/wp-content/uploads/2010/10/Samsung-T669-Gravity-T-pictures-3.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/Samsung-T669-Gravity-T-pictures-3.jpg)

klmobile198
29-10-2010, 06:12 PM
29.10.2010 Samsung i5500 Galaxy Unbrick, Dead boot repair supported

(http://www.jtagbox.com/jtag-news/riff-jtag-samsung-i5500-galaxy-unbrick-dead-boot-repair-supported/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Samsung_i5500.dll” contains pinout, instructions and required repair files for Samsung i5500 Galaxy Unbrick, Dead boot repair.


http://www.jtagbox.com/wp-content/uploads/2010/10/Samsung-Galaxy-i5500-Corby-Smartphone-Italy-2.jpg (http://www.jtagbox.com/wp-content/uploads/2010/10/Samsung-Galaxy-i5500-Corby-Smartphone-Italy-2.jpg)

Immb
24-11-2010, 04:55 AM
23.11.2010 CDMA Update – 4 new LG CDMA Models supported (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-update-4-lg-cdma-models-supported/)



LG RD3000
LG RD3100
LG RD3500
LG RD3510

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
There is 4 new DLL-s for LG CDMA models, containing pinout, boot files and firmware parts for listed models.

http://www.jtagbox.com/wp-content/uploads/2010/11/3500.jpg (http://www.jtagbox.com/wp-content/uploads/2010/11/3500.jpg)

(http://www.jtagbox.com/jtag-news/riff-jtag-cdma-update-4-lg-cdma-models-supported/)

Nhất Vũ
25-11-2010, 12:14 AM
24.11.2010 CDMA Update – 3 New models supported (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-update-3-models-supported/)


LG RD3540
LG RD3610
LG RD6100



Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
There is 3 new DLL-s for LG CDMA models, containing pinout, boot files and firmware parts for listed models.


http://www.jtagbox.com/wp-content/uploads/2010/11/RD6100.jpg (http://www.jtagbox.com/wp-content/uploads/2010/11/RD6100.jpg)

Nhất Vũ
26-11-2010, 11:04 PM
26.11.2010 Samsung Galaxy TAB (Samsung P1000) Unbrick, Repair dead boot supported
(http://www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-tab-samsung-p1000-unbrick-repair-dead-boot-supported/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Samsung_P1000.dll” contains pinout, instructions and required repair files for Samsung Galaxy TAB (Samsung P1000) Unbrick, Repair dead boot.


http://www.jtagbox.com/wp-content/uploads/2010/11/samsung_galaxy_tab_vzw.jpg (http://www.jtagbox.com/wp-content/uploads/2010/11/samsung_galaxy_tab_vzw.jpg)

klmobile198
30-11-2010, 06:12 AM
29.11.2010 HTC Wildfire Unlock, IMEI Change/Repair, CID Update, Unbrick – Boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-htc-wildfire-unlock-imei-changerepair-cid-update-unbrick-boot-repair-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“HTC_Wildfire.dll” contains pinout, instructions and required repair files for HTC Wildfire Unlock, IMEI Change/Repair, CID Update, Unbrick – Boot repair.


http://www.jtagbox.com/wp-content/uploads/2010/11/HTC-Wildfire.jpg (http://www.jtagbox.com/wp-content/uploads/2010/11/HTC-Wildfire.jpg)

klmobile198
30-11-2010, 06:46 PM
30.11.2010 HTC Hero (G2 Touch)Unlock, IMEI Change, CID Update, Unbrick – Boot repair supported

(http://www.jtagbox.com/jtag-news/riff-jtag-htc-hero-g2-unlock-imei-change-cid-update-unbrick-boot-repair-supported/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.


“HTC_Hero.dll” contains pinout, instructions and required repair files for HTC Wildfire Unlock, IMEI Change/Repair, CID Update, Unbrick – Boot repair.


http://www.jtagbox.com/wp-content/uploads/2010/11/HTC-hero.jpg (http://www.jtagbox.com/wp-content/uploads/2010/11/HTC-hero.jpg)

Nhất Vũ
01-12-2010, 08:33 PM
RIFF JTAG – CDMA Android update – Huawei C8500 Unbrick/Boot repair supported
01.12.2010 CDMA Android update – Huawei C8500 Unbrick/Boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-android-update-huawei-c8500-unbrickboot-repair-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_C8500.dll” contains pinout, instructions and required repair files for Huawei C8500 Unbrick/Boot repair.

http://www.jtagbox.com/wp-content/uploads/2010/12/huaweic8500.jpg (http://www.jtagbox.com/wp-content/uploads/2010/12/huaweic8500.jpg)

gem38
11-12-2010, 01:07 AM
RIFF JTAG – CDMA Update, ZTE-C N600 Boot repair/Unbrick supported

10.12.2010 CDMA Update, ZTE-C N600 Boot repair/Unbrick supported

(http://www.jtagbox.com/jtag-news/riff-jtag-cdma-update-ztec-n600-boot-repairunbrick-supported/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“ZTE_N600.dll” contains pinout, instructions and required repair files for ZTE-C N600 Unbrick/Boot repair.


http://www.jtagbox.com/wp-content/uploads/2010/12/zte-n600.jpg (http://www.jtagbox.com/wp-content/uploads/2010/12/zte-n600.jpg)

klmobile198
14-12-2010, 06:48 PM
14.12.2010 CDMA Update, Samsung A900 Blade Unbrick/Dead boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-update-samsung-a900-blade-unbrickdead-boot-repair-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Samsung_A900.dll” contains pinout, instructions and required repair files for Samsung A900 Blade Unbrick/Dead boot repair.

http://www.jtagbox.com/wp-content/uploads/2010/12/A900.jpg (http://www.jtagbox.com/wp-content/uploads/2010/12/A900.jpg)

14.12.2010 Samsung Z540 Unbrick/Dead boot repair supported

(http://www.jtagbox.com/jtag-news/riff-jtag-samsung-z540-unbrickdead-boot-repair-supported/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Samsung_Z540.dll” contains pinout, instructions and required repair files for Samsung A900 Blade Unbrick/Dead boot repair.

http://www.jtagbox.com/wp-content/uploads/2010/12/samsung-z540_1.jpg (http://www.jtagbox.com/wp-content/uploads/2010/12/samsung-z540_1.jpg)

Nhất Vũ
16-12-2010, 10:45 PM
RIFF JTAG – DELL XCD28 (ZTE Racer) Unbrick, dead boot repair supported 16.12.2010 DELL XCD28 (ZTE Racer) Unbrick, dead boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-dell-xcd28-zte-racer-unbrick-dead-boot-repair-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“DELL_XCD28.dll” contains pinout, instructions and required repair files for DELL XCD28 (ZTE Racer) Unbrick, dead boot repair.

http://www.jtagbox.com/wp-content/uploads/2010/12/Dell-XCD28-1.jpg (http://www.jtagbox.com/wp-content/uploads/2010/12/Dell-XCD28-1.jpg)

klmobile198
17-12-2010, 06:24 AM
16.12.2010 JTAG Manager v1.20, RIFF Box firmware v1.16 released (http://www.jtagbox.com/jtag-news/riff-jtag-jtag-manager-v120-riff-box-firmware-v116-released/)


Whats new :
JTAG Manager 1.20

- added 4.2V power supply output (RIFF RJ45 pin 1) controlling feature
For this go to DCC Read/Write page, click “Notifications…”, the Notifications dialog will be displayed,
go to “For Advanced Users” page and set desired mode for “Enable 4.2V output” checkbox.
When enabled, 4.2V line will be powered on after any “JTAG” operation executed and will remain “ON” until
box restart or until “Enable 4.2V output” checkbox is unchecked and any “JTAG” operation is executed.
- (SDK): exported new SUB_ID_GET_ROM_INFO function for resurrectors ;

http://www.jtagbox.com/wp-content/uploads/2010/12/advanced.jpg (http://www.jtagbox.com/wp-content/uploads/2010/12/advanced.jpg)

Firmware 1.16

- code is optimized to avoid deadlocks in ARM11 handling routines;
- reset sequence (after NRST assertion) is optimized for ARM11 core;
- added 4.2V power supply output (RIFF RJ45 pin 1) controlling feature
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new files, download it and restart the software.

_______________________________________

HTC Desire new security update is released too.

- Added support for new flash chip
- Added automatic detection of page size

Immb
24-12-2010, 06:02 PM
RIFF JTAG Updates - JTAG Manager v1.21, HTC Desire Model ID repair 24.12.2010 JTAG Manager v1.21, HTC Desire Model ID repair

JTAG Manager 1.21
---------------------------
- Startup is optimized: DLLs initialization time now is 1 second maximum no matter how many DLLs are present.

HTC Desire new DLL
---------------------------
- Added support for Model ID repair (Unknown Model problem)
- Added support for new partition layout Simlock
- Fixed bug with unlocking

Please click "Check for Updates" button to download latest updates.

Merry Christmas and Happy New Year !

klmobile198
28-12-2010, 06:26 AM
Samsung i5800 Galaxy 3 Unbrick, Dead Boot Repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-i5800-galaxy-3-unbrick-dead-boot-repair-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.




“Samsung_i5800.dll” contains pinout, instructions and required repair files for Samsung i5800 Galaxy 3 Unbrick/Dead boot repair. This is also world first Samsung S5P6422 CPU support.



http://www.jtagbox.com/wp-content/uploads/2010/12/Samsung-I5800-Galaxy-3.jpg

gem38
29-12-2010, 10:59 PM
29.12.2010 Huawei EC189 Broadband Modem Unbrick, Dead Boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-huawei-ec189-broadband-modem-unbrick-dead-boot-repair-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_EC189.dll” contains pinout, instructions and required repair files for Huawei EC189 Broadband Modem Unbrick, Dead Boot repair.

Nhất Vũ
24-01-2011, 07:10 PM
24.01.2011 CDMA Update Haier C2076 Boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-update-haier-c2076-boot-repair-supported/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Haier_C2076.dll” contains pinout, instructions and required repair files for Haier C2076 Boot repair Unbrick, Dead Boot repair.
http://www.jtagbox.com/wp-content/uploads/2011/01/c2076.jpg (http://www.jtagbox.com/wp-content/uploads/2011/01/c2076.jpg)

klmobile198
29-01-2011, 07:28 AM
28.01.2011 Dell Streak (Dell Mini 5) Unbrick – Repair dead boot supported (http://www.jtagbox.com/jtag-news/riff-jtag-dell-streak-dell-mini-5-unbrick-repair-dead-boot-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Dell_Streak.dll” contains pinout, instructions and required repair files for Dell Streak (Dell Mini 5) Unbrick – Repair dead boot.


http://www.jtagbox.com/wp-content/uploads/2011/01/dell-streak-att.jpg (http://www.jtagbox.com/wp-content/uploads/2011/01/dell-streak-att.jpg)

Nhất Vũ
31-01-2011, 07:51 PM
RIFF JTAG - ZTE MF190 Broadband modem Unbrick, Dead boot repair supported
[/URL]
by [URL="http://www.jtagbox.com/author/admin/"]admin (http://www.jtagbox.com/jtag-news/riff-jtag-zte-mf190-broadband-modem-unbrick-dead-boot-repair-supported/) on Jan.31, 2011, under News (http://www.jtagbox.com/category/jtag-news/)
31.01.2011 ZTE MF190 Broadband modem Unbrick, Dead boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_MF190.dll” contains pinout, instructions and required repair files for ZTE MF190 Broadband modem Unbrick, Dead boot repair.
http://www.jtagbox.com/wp-content/uploads/2011/01/zte-mf190.jpg (http://www.jtagbox.com/wp-content/uploads/2011/01/zte-mf190.jpg)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_MF190.dll” contains pinout, instructions and required repair files for ZTE MF190 Broadband modem Unbrick, Dead boot repair.


RIFF JTAG – ZTE MF190 Broadband modem Unbrick, Dead boot repair supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-zte-mf190-broadband-modem-unbrick-dead-boot-repair-supported/)

thienkhang
03-02-2011, 12:28 PM
Start the RIFF Box JTAG Manager, and switch to "Box Service" TAB:

http://jtagbox.com/downloads/manuals/Settings/FW_Update/fw1.jpg

On this screenshot You can see that box is in "Bootcore" mode.



Click the three dots inside red square in order to open firmware file :

Firmware files are located in "C:\Program Files\RIFF Box JTAG Manager\Firmwares" folder. If there is no any files, You need first to perform "Check for Updates" procedure and download available files.


Open latest Firmware file :

http://jtagbox.com/downloads/manuals/Settings/FW_Update/fw2.jpg
Click "Firmware Update" button :

http://jtagbox.com/downloads/manuals/Settings/FW_Update/fw3.jpg

As You can see, full path to selected firmware is now visible in "Firmware" file box. It will be stored into Windows registry.


RIFF Box is now being updated. In case Box was in normal mode, it will be switched to "Bootcore" mode. You may need to install RIFF Box driver again !

http://jtagbox.com/downloads/manuals/Settings/FW_Update/fw4.jpg
Firmware update is now finished, and box is restarting to normal mode:

http://jtagbox.com/downloads/manuals/Settings/FW_Update/fw5.jpg
Now everything has been finished successfully and box has latest firmware :

http://jtagbox.com/downloads/manuals/Settings/FW_Update/fw6.jpg

thaiduy
07-02-2011, 11:33 PM
07.02.2011 RIFF Box JTAG Manager v1.23, RIFF Box firmware v1.17


Firmware 1.17
---------------------------


Optimized DCC transfers (debugger-to-target) for ARM9 cores (~64,3% speed increase)
Added RX-polling feature (debugger-to-target) for ARM9 DCC transfers.
RIFF BOX firmware is able now to wait (if resurrector DLL will request so) for ARM9 target to be ready to accept next packet over DCC: this feature slows down a little the JTAG-to-ARM9 DCC transfers but guaranties no packets loss for slow clocked targets;

JTAG Manager 1.23
---------------------------



Improved DCC flashing functionality (for DCC Loaders that work in targets with a small RAM capacity);
Added 4 very low RTCK Sampling frequencies (20kHz, 40kHz, 60kHz and 80kHz) for some extreme cases
Fixed another bug in the optimized DLL loading scheme;
Increased ERASE waiting timeout (for slow NOR flash chips) so now erase operation for such chips will go successully and will not result in erase timeout
Added "Usefull plugins" page;
"Usefull Plugins" will be new feature, we hope to release first one during this week. So stay tuned.

As usually, click the "Check for Updates" button to obtain latest files.

klmobile198
09-02-2011, 07:26 PM
09.02.2011 LG GT540 Optimus Unbrick – Repair Boot supported (http://www.jtagbox.com/jtag-news/lg-gt540-optimus-unbrick-repair-boot-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“LG_GT540.dll” contains pinout, instructions and required repair files for LG GT540 Optimus Unbrick – Repair Dead Boot.

RIFF JTAG – LG GT540 Optimus Unbrick – Repair Boot supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/lg-gt540-optimus-unbrick-repair-boot-supported/)

RIFF Box firmware v1.17 and RIFF Box JTAG Manager v1.23 required !
RIFF Box – JTAG Revolution (http://www.riffbox.org/)

lyducquyen
10-02-2011, 10:29 PM
RIFF JTAG – RIFF JTAG Manager v1.24, RIFF Box Firmware v1.18 released 10.02.2011 RIFF JTAG Manager v1.24, RIFF Box Firmware v1.18 (http://www.jtagbox.com/jtag-news/riff-jtag-riff-jtag-manager-v124-riff-box-firmware-v118-released/)

Firmware 1.18
---------------------------
- PXA270 debug is now available in ARM/Thumb modes (use the GDBServer for this);

JTAG Manager 1.24
---------------------------
- In case when Resurrector has no DCC Loader the JTAG Manager will now report it correctly and will not allow DCC Read/Write features
- (SDK): more functions are now available (exported) for future Resurrector DLLs;
- Usefull Plugins Enabled
---------------------------

Qualcom FullFlash Image Processing Tool:

This plugin works with NAND image files which have generic Qualcomm layout

With help of this plugin you can do:
- Disassemble a full NAND image file previously obtained with JTAG Manager (DCC Read/Write Page);
- Inspect each partition contents (main zone and spare zone) simultaneously;
- Save separate partitions to HDD (only main zone, only spare zone, or both zones);
- Write a chosen partition directly into phone;
- Read a chosen partition directly from the phone and substitute old partition contents to new ones;

Please note, direct read/write operations from/to the phone will require proper resurrector to be set (Resurrector Settings: thus before clicking the Activate Plugin button make sure compatible model is selected as well as other settings like TCK/RTCK frequencies).

You can access it from "Usefull Plugins" TAB.

Nhất Vũ
11-02-2011, 06:28 PM
RIFF JTAG - LG P500 Optimus One, HP iPAQ 614 Unbrick/Boot repair supported
10.02.2011 LG P500 Optimus One Unbrick, Dead boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-lg-p500-optimus-unbrick-dead-boot-repair-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“LG_P500.dll” contains pinout, instructions and required repair files for LG P500 Optimus One Unbrick, Dead boot repair.
..

08.02.2011 Hewlett-Packard iPAQ 614 Boot Repair/Unbrick supported (http://www.jtagbox.com/jtag-news/riff-jtag-hewlett-packard-ipaq-614-boot-repair-unbrick-supported/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“iPak_614.dll” contains pinout, instructions and required repair files for Hewlett-Packard iPAQ 614 Boot Repair/Unbrick.


RIFF Box – JTAG Revolution (http://www.riffbox.org/)

Nhất Vũ
16-02-2011, 10:12 PM
RIFF JTAG - HTC HD7, CDMA Huawei C2906, QSC6xxx Generic DCC Loader


16.02.2011 HTC HD7 Unbrick, Unlock, IMEI Repair and CID Update supported (http://www.jtagbox.com/jtag-news/riff-jtag-htc-hd7-unbrick-unlock-imei-repair-cid-update-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_HD7.dll” contains pinout, instructions and required repair files for HTC HD7 Unbrick, Unlock, IMEI Repair and CID Update.

--------------------------


16.02.2011 CDMA Huawei C2906 Boot repair supported

(http://www.jtagbox.com/jtag-news/riff-jtag-cdma-huawei-c2906-boot-repair-supported/)
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_C2906.dll” contains pinout, instructions and required repair files for CDMA Huawei C2906 Boot repair, and NOR flash read/write operations.


---------------------

16.02.2011 - Qualcom QSC6xxx DCC Loader released (http://forum.gsmhosting.com/vbb/f634/riff-jtag-qualcom-generic-nand-dcc-loaders-1207324/)

Resurrector QSC6XXX L36 D08 contains only DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.
Embedded DCC Loader is designed to work inside of MCU's internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.



RIFF Box – JTAG Revolution (http://www.riffbox.org/) Rockin' the world again ! http://forum.gsmhosting.com/ubb/smile.gif
All night looooooooong http://forum.gsmhosting.com/ubb/biggrin.gif
http://www.youtube.com/watch?v=HDT_uqM1iqI

thaiduy
17-02-2011, 08:45 PM
17.02.2011 HTC P3400 (HTC Gene 100) Unbrick – Boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-htc-p3400-htc-gene-100-unbrick-boot-repair-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Gene.dll” contains pinout, instructions and required repair files for HTC P3400 (HTC Gene 100) Unbrick – Boot repair.

RIFF Box – JTAG Revolution (http://www.riffbox.org)

thienkhang
18-02-2011, 10:09 PM
18.02.2011 HTC P3300 (HTC Artemis 100) Unbrick – Boot Repair Supported
(http://www.jtagbox.com/jtag-news/riff-jtag-htc-p3300-htc-artemis-100-unbrick-boot-repair-supported/)

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Artemis.dll” contains pinout, instructions and required repair files for HTC P3300 (HTC Artemis 100) Unbrick – Boot Repair.

- Important :

There are 7 devices with Artemis code name. Check Your phone back sticker, if You see "ARTE100" or "ARTE110" You can repair Your phone.
"ARTE200" is NOT tested !.

www.riffbox.org (http://www.riffbox.org/)

klmobile198
04-03-2011, 07:22 PM
03.03.2011 ZTE MF180S Broadband modem Unbrick/Repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-zte-mf180s-broadband-modem-unbrickrepair-supported/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_MF180S.dll” contains pinout, instructions and required repair files for ZTE MF180S Broadband modem Unbrick/Repair boot.


http://www.jtagbox.com/wp-content/uploads/2011/03/MF180_3.jpg (http://www.jtagbox.com/wp-content/uploads/2011/03/MF180_3.jpg)

klmobile198
04-03-2011, 07:28 PM
04.03.2011 Samsung G800 Unbrick, dead boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-qualcom-nand-esm7xxx-generic-dll-released/)


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_G800.dll” contains pinout, instructions and required repair files for Samsung G800 Unbrick, dead boot repair.


http://www.jtagbox.com/wp-content/uploads/2011/03/g800-samsung.jpg (http://www.jtagbox.com/wp-content/uploads/2011/03/g800-samsung.jpg)

Nhất Vũ
10-03-2011, 10:34 PM
10.03.2011 HTC Tattoo A3232 (HTC Click 1100) Unlock, Unbrick, IMEI repair, CID Update supported (http://www.jtagbox.com/jtag-news/riff-jtag-htc-tattoo-a3232-htc-click-1100-unlock-unbrick-imei-repair-cid-update/)


Resurrecting HTC Click is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside.
There are two different hardware versions exist – one based on the MSM7225 chipset (CLIC10000) and other – on the ESM7225 chipset (CLIC11000). In resurrector settings you can select a desired version.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.52.0001 SPL version.
As well, you can change CID – for this make sure ‘Repair Custom ID’ field is checked in the Resurrection Guide dialog.
To resurrect HTC Click:


Solder JTAG cable to HTC Click JTAG pads;
Make sure HTC Click is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To Unlock HTC Click :


Solder JTAG cable to HTC Click JTAG pads;
Make sure HTC Click is selected in the list of models;
Click Resurrect button;
Select “Unlock Settings” TAB
Select Unlock method
Click “Unlock”


10.03.2011 HTC Desire DLL Update – Unlock Code reading supported
(http://www.jtagbox.com/jtag-news/riff-jtag-htc-desire-dll-update-unlock-code-reading-supported/)

New HTC Desire DLL has additional option to select between reading NCK Code, or direct unlock.
This should also solve “error 0×45″ problem with some of the HW revisions.



10.03.2011 ASUS P526 Unbrick, Dead Boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-asus-p526-unbrick-dead-boot-repair-supported/)


Resurrection of ASUS P526 is slightly complicated. JTAG pads are very small and sensitive thus extreme care must be taken when soldering wires to the board. Battery must be connected in order to establish JTAG connection.
Current resurrector re-flashes only the IPL area, and will not re-write MDOC XLOADER area (though write of this area is supported too).
Please note: DiskOnChip G4 memory has security features, due to which there is a risk of permanently blocking the access to the flash memory while re-flashing the XLOADER areas. Current resurrector will not touch the XLOADER zone, but it is possible you’re already holding such killed device in hands. If it is so you will see this error:
************************************************** **************
Detected a Not Initialized FLASH1 Chip ID: 0×0400/0xFBFF
ERROR: Selected FLASH Chip was not initialized by the DCC Loader
************************************************** **************
This can happen due to unknown protection keys used or due to permanently blocked MDOC chip. If latter is true we advise you to solder a new flash memory chip or throw this phone away to the trash bin.
To resurrect ASUS P526:


Solder JTAG cable to ASUS P526 JTAG pads;
Insert battery and connect USB cable to phone and PC;
Make sure ASUS P526 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
If phone not enters download mode after resurrection then it means XLOADER was damaged too but memory chip is still usable. In this case repeat resurrection using RAM Downloader Mode and when USB connection is established reflash the phone with official firmware.
To enter download mode:


Disconnect PC cable;
Insert battery;
Move ‘Lock’ slider down, hold ‘OK’ key (on the left) and press ‘Power ON’ button. In few seconds you should see TriColor picture.

Additional info:


Phone has DiskOnChip G4 memory type, which has security features. It has two password protected partitions (Password1 = 12345678, Password2 = 00000000);
XLOADER re-flash is not performed in this resurrector on purpose. While re-flashing the XLOADER area there is a risk of permanently blocking the memory chip.
Any write access (Erase or Write) on MDOC NAND memory range 0×00000000 to 0x0017FFFF is rejected by the DCC Loader


10.03.2011 CDMA ZTE F285 Repair supported

(http://www.jtagbox.com/jtag-news/riff-jtag-cdma-zte-f285-repair-supported/)
Resurrecting ZTE F285 is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board. Resurrector re-flashes only firmware zone of the phone (0×000000 to 0x60FFFF).

To resurrect ZTE F285:


Solder JTAG cable to ZTE F285 JTAG pads;
Insert USB Data cable into board and PC;
Make sure ZTE F285 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires;


10.03.2011 RIFF JTAG Manager v1.27, RIFF Box Firmware v1.19 (http://www.jtagbox.com/jtag-news/riff-jtag-riff-jtag-manager-v127-riff-box-firmware-v119/)
Whats new :
RIFF JTAG Manager v1.27


Fixed access violation bug upon JTAG Manager startup if there is no RIFF Box detected and Cancel button is clicked.
(SDK): more functions are now available (exported) for future Resurrector DLLs;
Added flags for JTAG Manager to be able to retrieve memory chip size from the DCC Loader.
Fixed initialization bug for NOR-related DCC Loadererss
ScriptEngine: added options pocessing ‘/byte’, ‘/word’, ‘/long’ to data.save.binary instruction: thus it’s possible now to read memory through script using desired bus access width (8-,16-, or 32-bit widths). For example: “data.save.binary c:\myfile.bin 0×00..0x11FF /word” – will read 0×1200 bytes from memory into myfile.bin file starting from address 0×00 using 16-bit bus accesses.

Note: “Read Memory” button on the JTAG Read/Write page reads memory using 32-bit bus accesses only.
RIFF Box Firmware v1.19


Added more H/W script (*.has) instructions;
Added HTC security processing functions;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

AnhDungMobile™
11-03-2011, 06:41 PM
10.03.2011 HTC Tattoo A3232 (HTC Click 1100) Unlock, Unbrick, IMEI repair, CID Update supported (http://www.jtagbox.com/jtag-news/riff-jtag-htc-tattoo-a3232-htc-click-1100-unlock-unbrick-imei-repair-cid-update/)


Resurrecting HTC Click is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside.
There are two different hardware versions exist – one based on the MSM7225 chipset (CLIC10000) and other – on the ESM7225 chipset (CLIC11000). In resurrector settings you can select a desired version.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.52.0001 SPL version.
As well, you can change CID – for this make sure ‘Repair Custom ID’ field is checked in the Resurrection Guide dialog.
To resurrect HTC Click:


Solder JTAG cable to HTC Click JTAG pads;
Make sure HTC Click is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To Unlock HTC Click :


Solder JTAG cable to HTC Click JTAG pads;
Make sure HTC Click is selected in the list of models;
Click Resurrect button;
Select “Unlock Settings” TAB
Select Unlock method
Click “Unlock”


10.03.2011 HTC Desire DLL Update – Unlock Code reading supported
(http://www.jtagbox.com/jtag-news/riff-jtag-htc-desire-dll-update-unlock-code-reading-supported/)

New HTC Desire DLL has additional option to select between reading NCK Code, or direct unlock.
This should also solve “error 0×45″ problem with some of the HW revisions.



10.03.2011 ASUS P526 Unbrick, Dead Boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-asus-p526-unbrick-dead-boot-repair-supported/)


Resurrection of ASUS P526 is slightly complicated. JTAG pads are very small and sensitive thus extreme care must be taken when soldering wires to the board. Battery must be connected in order to establish JTAG connection.
Current resurrector re-flashes only the IPL area, and will not re-write MDOC XLOADER area (though write of this area is supported too).
Please note: DiskOnChip G4 memory has security features, due to which there is a risk of permanently blocking the access to the flash memory while re-flashing the XLOADER areas. Current resurrector will not touch the XLOADER zone, but it is possible you’re already holding such killed device in hands. If it is so you will see this error:
************************************************** **************
Detected a Not Initialized FLASH1 Chip ID: 0×0400/0xFBFF
ERROR: Selected FLASH Chip was not initialized by the DCC Loader
************************************************** **************
This can happen due to unknown protection keys used or due to permanently blocked MDOC chip. If latter is true we advise you to solder a new flash memory chip or throw this phone away to the trash bin.
To resurrect ASUS P526:


Solder JTAG cable to ASUS P526 JTAG pads;
Insert battery and connect USB cable to phone and PC;
Make sure ASUS P526 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
If phone not enters download mode after resurrection then it means XLOADER was damaged too but memory chip is still usable. In this case repeat resurrection using RAM Downloader Mode and when USB connection is established reflash the phone with official firmware.
To enter download mode:


Disconnect PC cable;
Insert battery;
Move ‘Lock’ slider down, hold ‘OK’ key (on the left) and press ‘Power ON’ button. In few seconds you should see TriColor picture.

Additional info:


Phone has DiskOnChip G4 memory type, which has security features. It has two password protected partitions (Password1 = 12345678, Password2 = 00000000);
XLOADER re-flash is not performed in this resurrector on purpose. While re-flashing the XLOADER area there is a risk of permanently blocking the memory chip.
Any write access (Erase or Write) on MDOC NAND memory range 0×00000000 to 0x0017FFFF is rejected by the DCC Loader


10.03.2011 CDMA ZTE F285 Repair supported

(http://www.jtagbox.com/jtag-news/riff-jtag-cdma-zte-f285-repair-supported/)
Resurrecting ZTE F285 is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board. Resurrector re-flashes only firmware zone of the phone (0×000000 to 0x60FFFF).

To resurrect ZTE F285:


Solder JTAG cable to ZTE F285 JTAG pads;
Insert USB Data cable into board and PC;
Make sure ZTE F285 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires;


10.03.2011 RIFF JTAG Manager v1.27, RIFF Box Firmware v1.19 (http://www.jtagbox.com/jtag-news/riff-jtag-riff-jtag-manager-v127-riff-box-firmware-v119/)
Whats new :
RIFF JTAG Manager v1.27


Fixed access violation bug upon JTAG Manager startup if there is no RIFF Box detected and Cancel button is clicked.
(SDK): more functions are now available (exported) for future Resurrector DLLs;
Added flags for JTAG Manager to be able to retrieve memory chip size from the DCC Loader.
Fixed initialization bug for NOR-related DCC Loadererss
ScriptEngine: added options pocessing ‘/byte’, ‘/word’, ‘/long’ to data.save.binary instruction: thus it’s possible now to read memory through script using desired bus access width (8-,16-, or 32-bit widths). For example: “data.save.binary c:\myfile.bin 0×00..0x11FF /word” – will read 0×1200 bytes from memory into myfile.bin file starting from address 0×00 using 16-bit bus accesses.

Note: “Read Memory” button on the JTAG Read/Write page reads memory using 32-bit bus accesses only.
RIFF Box Firmware v1.19


Added more H/W script (*.has) instructions;
Added HTC security processing functions;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

NoName
13-03-2011, 10:19 AM
12.03.2011 Samsung SGH-i607 BlackJack PDA Unbrick, Dead Boot repair supported
Resurrecting Samsung i607 PDA part is easy. Phone requires battery presence in order to establish JTAG connection. If you additionally connect charger the phone will be auto powered on and there will be no need to press Power on key.
In case you experience connection problems, de-power phone completely, disconnect charger (if it was used), then insert battery, click Resurrection button in the JTAG Manger and immediately (within 0…1 seconds) press Power On key.
To unbrick Samsung i607 PDA part:


Solder JTAG cable to Samsung i607 PDA JTAG pads;
Make sure Samsung i607 PDA is selected in the list of models;
If only battery is connected – press Power On key shortly;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/03/cingular-blackjack.jpg


11.03.2011 CDMA Huawei C5005 Unbrick – Repair supported
Resurrecting Huawei C5005 is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Resurrector re-flashes only firmware zone of the phone (0×000000 to 0xBFFFFF).
To resurrect Huawei C5005:


Solder JTAG cable to Huawei C5005 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Huawei C5005 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires;


Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/03/c5005.jpg

klmobile198
15-03-2011, 06:14 AM
14.03.2011 CDMA Samsung SPH-D700 Galaxy S Epic 4G Unbrick, Dead Boot repair supported
Samsung SPH-D700 is based on the S5PC110 Processor (ARM core is Cortex-A8). Depending on firmware state resurrection can be a bit confusing: for successful connection you will require charged battery. Please note – no matter whether you have USB cable or not – it must not be connected to phone. This is important.
Resurrector will reflash IBL, PBL, SPL and PARAM areas. Additionally you can select KERNEL and RECOVERY partitions to be reflashed too. Though them are required only for recovery mode and not needed for following USB firmware update by Odin software. So if you don’t need recovery mode don’t select these 2 partitions – otherwise you will just waste time waiting for them to be reflashed.
If after resurrection the download mode still cannot be initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.
To resurrect Samsung SPH-D700:


Solder JTAG cable to Samsung SPH-D700 JTAG pads;
Make sure USB cable or charger is not connected;
Make sure Samsung SPH-D700 is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Insert battery;
Click Resurrect button;
Press Power On key; when you will see “Establish communication with the phone…” message – press Power On ey again (and hold it pressed for 1-2 seconds);
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download or recovery mode:


Disconnect PC cable;
Insert battery;
Hold ’1′ key on the keypad and press Power-On to enter download mode;
Hold both ‘Volume Down’ and ‘Camera’ keys and press Power-On to enter recovery mode.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/03/epic4G_front_400.jpg (http://www.jtagbox.com/wp-content/uploads/2011/03/epic4G_front_400.jpg)

klmobile198
15-03-2011, 06:15 AM
14.03.2011 RIFF JTAG Manager v1.28, RIFF Box firmware v1.20 released

(http://www.jtagbox.com/jtag-news/riff-jtag-riff-jtag-manager-v128-riff-box-firmware-v120-released/)
Whats new :
Firmware 1.20


Optimised connection to the PXA270 core
Added DCC TX channel (host-to-debugger) cleanup (flushing) feature (happens now during DCC Read with 0 timeout parameter) for Cortex-A8
Optimized Cortex-A8 connection establishment after coming out of reset (after NRST signal assertion)
Added emergency script processing for Cortex-A8 core (h/w script which is executed immediately after core was halted)

JTAG Manager 1.28


Added RAM selft-test right before uploading DCC loader.
Added functionality to handle complex memory devices (like MDOC H3) with lengths not necessary to be alighned to MBs;
Added DCC TX channel flushing command before starting DCC Loader – thus it is guaranteed that next first DCC read will get DCC Loader’s packet and not some residual trash data.
Added 1GB and 2GB OneNAND chips to the size autodetection list.
Added progress indication during saving files which were read on the DCC Read/Write page

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

Nhất Vũ
15-03-2011, 08:16 AM
RIFF JTAG - Samsung SPD 700, JTAG Manager v1.28
14.03.2011 CDMA Samsung SPH-D700 Galaxy S Epic 4G Unbrick, Dead Boot repair supported

(http://www.jtagbox.com/jtag-news/riff-jtag-cdma-samsung-sph-d700-galaxy-s-epic-4g-unbrick-dead-boot-repair-supported/)
Samsung SPH-D700 is based on the S5PC110 Processor (ARM core is Cortex-A8). Depending on firmware state resurrection can be a bit confusing: for successful connection you will require charged battery. Please note – no matter whether you have USB cable or not – it must not be connected to phone. This is important.
Resurrector will reflash IBL, PBL, SPL and PARAM areas. Additionally you can select KERNEL and RECOVERY partitions to be reflashed too. Though them are required only for recovery mode and not needed for following USB firmware update by Odin software. So if you don’t need recovery mode don’t select these 2 partitions – otherwise you will just waste time waiting for them to be reflashed.
If after resurrection the download mode still cannot be initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.


To resurrect Samsung SPH-D700:


Solder JTAG cable to Samsung SPH-D700 JTAG pads;
Make sure USB cable or charger is not connected;
Make sure Samsung SPH-D700 is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Insert battery;
Click Resurrect button;
Press Power On key; when you will see “Establish communication with the phone…” message – press Power On ey again (and hold it pressed for 1-2 seconds);
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.


To enter download or recovery mode:


Disconnect PC cable;
Insert battery;
Hold ’1′ key on the keypad and press Power-On to enter download mode;
Hold both ‘Volume Down’ and ‘Camera’ keys and press Power-On to enter recovery mode.






14.03.2011 RIFF JTAG Manager v1.28, RIFF Box firmware v1.20 released

(http://www.jtagbox.com/jtag-news/riff-jtag-riff-jtag-manager-v128-riff-box-firmware-v120-released/)
Whats new :
Firmware 1.20


Optimised connection to the PXA270 core
Added DCC TX channel (host-to-debugger) cleanup (flushing) feature (happens now during DCC Read with 0 timeout parameter) for Cortex-A8
Optimized Cortex-A8 connection establishment after coming out of reset (after NRST signal assertion)
Added emergency script processing for Cortex-A8 core (h/w script which is executed immediately after core was halted)

JTAG Manager 1.28


Added RAM selft-test right before uploading DCC loader.
Added functionality to handle complex memory devices (like MDOC H3) with lengths not necessary to be alighned to MBs;
Added DCC TX channel flushing command before starting DCC Loader – thus it is guaranteed that next first DCC read will get DCC Loader’s packet and not some residual trash data.
Added 1GB and 2GB OneNAND chips to the size autodetection list.
Added progress indication during saving files which were read on the DCC Read/Write page

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

klmobile198
15-03-2011, 06:55 PM
14.03.2011 Toshiba Portege G900 Unbrick, Dead Boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-toshiba-portege-g900-unbrick-dead-boot-repair-supported/)


Resurrection of Toshiba Portégé G900 PDA part is not hard. Battery is required for successful HALT operation. If USB Data Cable is connected phone is auto powered on when battery is inserted.
If during connect operation (“Establish communication with the phone…”) after 2-3 passes there is still no success (progress bar keeps running from 0 to 100% and so on) then remove battery and insert it again. If USB cable is not connected then press and hold Power On key.
Current resurrector re-flashes only the EBOOT and secondary EBOOT area, and will not re-write IPL area (though write of this area is supported too).
Please note: DiskOnChip G4 memory has security features, due to which there is a risk of permanently blocking the access to the flash memory while re-flashing the IPL areas. Current resurrector will not touch the IPL zone, but it is possible you’re already holding such killed device in hands. If it is so you will see this error:

************************************************** **************
Detected a Not Initialized FLASH1 Chip ID: 0×0400/0xFBFF
ERROR: Selected FLASH Chip was not initialized by the DCC Loader
************************************************** **************


This can happen due to unknown protection keys used or due to permanently blocked MDOC chip. If latter is true we advise you to solder a new flash memory chip or throw this phone away to the trash bin.


To resurrect Toshiba G900 PDA part:


Solder JTAG wires to the Toshiba G900 PDA pads;
Connect USB cable to phone and PC;
Make sure Toshiba G900 PDA is selected in the list of models;
Insert battery and click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.


To enter USB download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Left soft’ key (which is exactly above the Dial key) and press ‘Power ON’ button. In few seconds you should see red download screen.

To enter SD-card download mode:


Disconnect PC cable;
Insert battery;
Hold ‘D’ key and press ‘Power ON’ button.

Additional info:


Phone has DiskOnChip G4 memory type, which has security features. It has two password protected partitions (Password1 = 12345678, Password2 = 00000000);
IPL re-flash is not performed in this resurrector on purpose. While re-flashing the IPL area there is a risk of permanently blocking the memory chip.
Any write access (Erase or Write) on MDOC NAND memory range 0×00000000 to 0x0017FFFF is rejected by the DCC Loader. For full image writing convenience access to that range will not rise any error, data will just be ignored and reported as if it was written successfully, thus you still can write full image files using ‘Auto FullFlash Size’ checked.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

klmobile198
17-03-2011, 06:47 PM
17.03.2011 Huawei E153U Broadband modem unbrick – dead boot repair supported
Resurrecting Huawei E153U is simple. Just make sure you solder all JTAG signals and insert modem into a USB port for it to get powered.
If modem is not detected by RIFFBOX JTAG, disconnect JTAG connector, re-insert modem into USB and then connect back the JTAG connector.
There are secured (QCSBL is signed) and non-secured (QCSBL is not signed) modem revisions exist. Resurrector will automatically detect board revision and will select proper data to be flashed.
No matter what h/w revision is you can select which partitions are to be flashed during resurrection process.
To resurrect Huawei E153U:


Solder JTAG cable to Huawei E153U JTAG pads;
Insert Huawei E153U modem into any USB port for power;
Make sure Huawei E153U is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/03/Huawei-E153U.jpg (http://www.jtagbox.com/wp-content/uploads/2011/03/Huawei-E153U.jpg)

Nhất Vũ
21-03-2011, 08:32 PM
RIFF BOX - ROVER PC EVO V7, MARVELL PXA3XX Generic NAND DCC Loader

21.02.2011 RoverPC EVO V7 Unbrick – Dead boot repair supported

(http://www.jtagbox.com/jtag-news/riff-jtag-roverpc-evo-v7-unbrick-dead-boot-repair-supported/)
RoverPC Evo V7 resurrection is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.


To resurrect RoverPC Evo V7:


Solder JTAG cable to RoverPC Evo V7 JTAG pads;
Connect USB cable to phone and PC;
Make sure RoverPC Evo V7 is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original firmware downloader software to restore it to the working state.


To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Camera’ keys and press Power-On.


21.03.2011 MARVELL PXA3XX NAND Generic DLL Released (http://www.jtagbox.com/jtag-news/riff-jtag-marvell-pxa3xx-nand-generic-dll-released/)



Resurrector PXA3XX contains only NAND DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.

Embedded DCC Loader is designed to work inside of MCU's internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.

21.03.2011 - RIFF Box Firmware v1.21 (http://www.jtagbox.com/jtag-news/riff-jtag-riff-box-firmware-v121-released/)

Firmware 1.21
---------------------------


Added RX-polling feature (debugger-to-target) for PXA3XX DCC transfers.

RIFF BOX firmware is able now to wait (if resurrector DLL will request so) for PXA3XX target to be ready to accept
next packet over DCC: this feature slows down a little the JTAG-to-Target DCC
transfers but guaranties no packets loss for slow clocked targets;


Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

klmobile198
23-03-2011, 06:31 AM
22.03.2011 Samsung GT-B7330 Omnia PRO Boot Repair Supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_B7330.dll” contains pinout, instructions and required repair files for Samsung GT-B7330 OmniaPRO Unbrick – Boot Repair.

klmobile198
01-04-2011, 06:21 AM
31.03.2011 HTC Ozone XV6175 (HTC Chief) Unbrick, Boot Repair, Unlock, IMEI Repair, CID Update supported


Resurrecting HTC Chief is easy:
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.44.0000 SPL version.
Additionally, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘CEDA10000′.
As well, you can change CID – for this make sure ‘Repair Custom ID’ field is checked in the Resurrection Guide dialog.
To resurrect HTC Chief:


Solder JTAG cable to HTC Chief JTAG pads;
Make sure HTC Chief is selected in the list of models;
Insert battery and connect USB Cable;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/03/verizon_htc_ozone.jpg (http://www.jtagbox.com/wp-content/uploads/2011/03/verizon_htc_ozone.jpg)


31.03.2011 JTAG Manager v1.29, RIFF Box Firmware v1.21 released
JTAG Manager 1.29
—————————


Fixed bug with plugins managing in case there is more than 1 plugin DLL available;
Currently selected plugin is remembered now and will stay on next startups;
Fixed Access Violation error during software startup in case there is none resurrector DLL present;
Added Reset Method selection feature for more precise reset operation when Custom Target Settings is active;
Updates manager & Updates tracking were completely reworked, and now are based not on the system time but on file’s hashing.
Thus since now on the JTAG Manager’s installation folder can be copied/moved/re-installed (whatever else) without need to re-download full set of files again.
(SDK): more functions are now available (exported) for future Resurrector DLLs;
Many cosmetic changes;
FINALLY: “healed” the optimized DLL loading scheme:
User shall see: “Found and Initialized: XXX New and YYY Old External Repair Pack(s)” where XXX must be always non-zero only on first startup after there were new DLLs downloaded from the support.
On following JTAG Manager startups XXX shall be always equal to zero (!!!)
For example, after downloading 3 more new DLLs while there were 100 Resurrector DLLs already installed, after JTAG Manager restarts user shall see:
Found and Initialized: 3 New and 100 Old External Repair Pack(s)
on next and all following restarts user shall see:
Found and Initialized: 0 New and 103 Old External Repair Pack(s)
Re-worked balloon hints system – Own (not windows’) balloons are shown, so no matter now what are the windows’ tray icon settings are.
Added balloon hints for cases when target is not detected, error code 0×45, Device Id = 0x000000E1.
Don’t forget that balloons hints can be switched on or off from the DCC Read/Write page – click “Notifications…” and select”For Advanced Users” page to see settings
- JTAG Manager now has new Icons http://www.jtagbox.com/wp-includes/images/smilies/icon_smile.gif
- Improved JTAG Manager restarting during updating itself

Firmware 1.21
—————————


Added RX-polling feature (debugger-to-target) for PXA3XX DCC transfers.

RIFF BOX firmware is able now to wait (if resurrector DLL will request so) for PXA3XX target to be ready to accept
next packet over DCC: this feature slows down a little the JTAG-to-Target DCC
transfers but guaranties no packets loss for slow clocked targets;
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

Nhất Vũ
04-04-2011, 10:40 PM
04.04.2011 HTC Advantage X7510 (HTC Athena) Unbrick – Boot Repair supported
Resurrection of HTC Athena is easy. Most convenient is to have USB cable connected and battery inserted.
If during connection progress bar in JTAG Manager keeps running from 0 to 100% press with stylus the reset button on the phone (reset button is near to the JTAG pads).
Resurrector will reflash IPL and SPL areas. You can select SPL version to be flashed in the settings window which popups before resurrection. IPL which is flashed: “ATHENA IPL DVT 2.02 H3” version.
Current resurrector works only with HTC Athena hardware revisions which have DiskOnChip H3 memory chip installed. If you have hardware revision with DiskOnChip G4 memory chip used then select different resurrector.
To resurrect HTC Athena with DiskOnChip H3:


Solder JTAG cable to HTC Athena JTAG pads;
Insert battery and connect USB cable to phone and PC;
Make sure HTC Athena is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Camera’ key and press ‘Power ON’ key or use stylus to press ‘Reset’ button. In few seconds you should see TriColor picture.

Additional info:


DiskOnChip H3′s full NAND memory chip is divided into partitions by the internal memory controller. Thus DCC Loader creates virtual FLASH chip for each partition – you can read/write these partitions by selecting proper ROM index (“Access ROMi Address Space”) on the JTAG Manager’s DCC Read/Write page;
DiskOnChip H3 has no spare zones, thus only Main field must be used during write operations. ECC Enable checkbox has no meaning here.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/htc_x7510.jpg (http://www.jtagbox.com/wp-content/uploads/2011/04/htc_x7510.jpg)

klmobile198
06-04-2011, 05:12 PM
RIFF JTAG – CDMA Micromax C111 Boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-micromax-c111-boot-repair-supported/)


06.04.2011 CDMA Micromax C111 Boot repair supported
Resurrecting Micromax C111 is simple. Board is auto powered on when battery is inserted and USB cable is connected.
There are 2 different hardware revisions of this phone – one is based on Qualcomm QSC1100 MCU and other – is Qualcomm QSC6010 MCU. Current resurrector shall be selected if you have QSC1100 revision.
Resurrector re-flashes only firmware zone of the phone (0×000000 to 0x6FFFFF).
To resurrect Micromax C111:


Solder JTAG cable to Micromax C111 JTAG pads;
Connect ignition cable for auto power on or use battery;
Make sure Micromax C111 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/Celkon-C111-Mobile-Phone.jpg (http://www.jtagbox.com/wp-content/uploads/2011/04/Celkon-C111-Mobile-Phone.jpg)


RIFF JTAG – CDMA Huawei C2830 Boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-huawei-c2830-boot-repair-supported/)

06.04.2011 CDMA Huawei C2830 Boot repair supported
Resurrecting Huawei C2830 is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board. Since the JTAG test points are placed under keyboard sticker we recommend using USB data cable to supply power to the device.
Resurrector re-flashes only firmware zone of the phone (0×000000 to 0x5FFFFF).
Please note: if you do not have JIG (that is you solder wires instead) then black graphite covering has to be carefully scratched off in order to access copper surface of the pads.
To resurrect Huawei C2830:


Solder JTAG cable to Huawei C2830 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Huawei C2830 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/huawei_c2830.jpg (http://www.jtagbox.com/wp-content/uploads/2011/04/huawei_c2830.jpg)

klmobile198
07-04-2011, 04:24 PM
06.04.2011 Samsung Galaxy Mini (S5570) Unbrick – Boot repair supported
Samsung S5570 resurrection is simple. Phone is auto powered when USB Data Cable is inserted while battery is inside. If you don’t use USB cable, make sure to hold Power On button during JTAG connection establishing phase.
To resurrect Samsung S5570 do this:


Solder JTAG cable to Samsung S5570 JTAG pads;
Insert battery and connect USB cable to phone and PC;
Make sure Samsung S5570 is selected in the list of models;
Click Resurrect button;
Wait few seconds until software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On to enter Download Mode;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/samsung-galaxy-mini-s5570-2.jpg (http://www.jtagbox.com/wp-content/uploads/2011/04/samsung-galaxy-mini-s5570-2.jpg)


06.04.2011 CDMA Samsung B159 Boot repair supported
Resurrecting Samsung B159 is simple. Board is auto powered on when battery is inserted and USB cable is connected.
Resurrector re-flashes only firmware zone of the phone (0×000000 to 0x57FFFF).
To resurrect Samsung B159:


Solder JTAG cable to Samsung B159 JTAG pads;
Connect ignition cable for auto power on or use battery;
Make sure Samsung B159 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/samsung-B159.gif (http://www.jtagbox.com/wp-content/uploads/2011/04/samsung-B159.gif)

Nhất Vũ
08-04-2011, 10:51 PM
08.04.2011 Samsung S7230E Wave 723 Unbrick – Boot Repair supported
Resurrecting Samsung S7230E is easy. To power the phone connect USB cable and insert battery. In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.
To resurrect Samsung S7230E:


Solder JTAG cable to Samsung S7230E JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung S7230E is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state. We used MultiLoader 5.64 version.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ (on the left side of phone) and ‘Lock’ (right side bottom part) keys and press Power-On.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/Samsung-Wave-723-GT-S7230E-bada-Phone.jpg (http://www.jtagbox.com/wp-content/uploads/2011/04/Samsung-Wave-723-GT-S7230E-bada-Phone.jpg)

Nhất Vũ
10-04-2011, 09:20 AM
09.04.2011 HTC 7 Mozart Unbrick, Unlock, IMEI Repair, CID Repair, ModelID Repair supported
Resurrecting HTC Mozart is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.60.1000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD6710000′.
To resurrect HTC Mozart:


Solder JTAG cable to HTC Mozart JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC Mozart is selected in the list of models;
If you use battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/htc_7_mozart_2.jpg (http://www.jtagbox.com/wp-content/uploads/2011/04/htc_7_mozart_2.jpg)

klmobile198
12-04-2011, 04:59 PM
12.04.2011 HTC Polaris (HTC Cruise) Unbrick, Unlock, IMEI and CID Update, ModelID repair supported
Resurrecting HTC Polaris is easy.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 2.20.AxeBox. Additionally, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘POLA10000′.
To resurrect HTC Polaris:


Solder JTAG cable to HTC Polaris JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC Polaris selected in the list of models;
If you use battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/htc_touch_cruise.jpg (http://www.jtagbox.com/wp-content/uploads/2011/04/htc_touch_cruise.jpg)

klmobile198
12-04-2011, 05:07 PM
12.04.2011 RIFF JTAG Manager v1.30, RIFF Box Firmware v1.22 released

Firmware 1.22
---------------------------


Fixed bugs in ARM7 core handling routines



JTAG Manager 1.30
---------------------------


Added DISABLE_POLLING request processing from DCC Loader

(used by DCC Loaders which have small RAM size available and there is no DCC RX polling is implemented in RIFFBOX firmware for current core);

klmobile198
12-04-2011, 05:13 PM
12.04.2011 CDMA HTC Droid Eris, Unbrick, Boot Repair, ModelID repair supported
Resurrecting HTC Droid Eris is easy. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PB0010000′.
To resurrect HTC Droid Eris:


Solder JTAG cable to HTC Droid Eris JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC Droid Eris is selected in the list of models;
If you use battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume down’ key and press ‘Power ON’ button to enter HBoot menu;
Hold ‘Volume up’ key and press ‘Power ON’ button to enter Recovery mode;

Manual Activation of the phone (in case you see Activation screen and phone is unable to make call to retrieve settings automatically):


Press Emergency Call;
Dial ##778 and press Call key;
Tap “Edit Mode”;
Enter password “000000”;
Tap NAM Settings;
Enter your 10 digit phone number and tap OK;
Tap NAM1 and enter your 7 digit cell phone number without area code;
Tap NAM2 and enter your 3 digit area code;
Tap Back;
Tap SID/NID Settings and change the left box to 40 and leave right box as it is and then tap OK;
Tap Menu;
Tap Commit Mod: after this phone will restart in 10 seconds and will bypass the main activation screen.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/htc_droid_eris.jpg (http://www.jtagbox.com/wp-content/uploads/2011/04/htc_droid_eris.jpg)

klmobile198
12-04-2011, 05:17 PM
12.04.2011 HTC Desire, HTC Topaz bug fixes

HTD_Topaz.dll
----------------------------------------


0xB01700E1 ID is added to allowed list



HTD_Desire.dll
-------------------------------------
Fixed unlock code reading for H/W revisions with NAND chips Page size = 4096 bytes

Nhất Vũ
20-04-2011, 10:41 PM
RIFF JTAG – CDMA Samsung SCH-S109 (MSM6000) Repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-samsung-schs109-msm6000-repair-supported/)


20.04.2011 CDMA Samsung SCH-S109 (MSM6000) Repair supported
Resurrecting Samsung S109 is simple. Phone is auto powered on with charger connected; battery presence is not required.
Resurrector re-flashes only firmware zone of the phone (0×000000 to 0x3FFFFF).
To resurrect Samsung S109:


Solder JTAG cable to Samsung S109 JTAG pads;
Connect ignition cable for auto power on or use battery;
Make sure Samsung S109 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/Samsung-SCH-S109.jpg (http://www.jtagbox.com/wp-content/uploads/2011/04/Samsung-SCH-S109.jpg)



RIFF JTAG – JTAG Manager v1.31, RIFF Box Firmware v1.23 released (http://www.jtagbox.com/jtag-news/riff-jtag-jtag-manager-v131-riff-box-firmware-v123-released/)


20.04.2011 JTAG Manager v1.31, RIFF Box Firmware v1.23 released
Whats new :
JTAG Manager 1.31


“RUN/STOP” Loaders functionality is added (and alternative to the DCC Loaders)

This is required for some ARM7 cores when Debug Communication Channel (DCC) to/from core is not functional (like in MSM6000)
Firmware 1.23


Added 8/16/32-bit bus read/write access rotuines for ARM7 core
ARM7 debug is now available in ARM/Thumb modes (use the GDBServer for this);


Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

NGUYÊNQNGAI
21-04-2011, 05:16 PM
21.04.2011 CDMA Motorola W150i (MSM6000) Repair supported


Resurrecting Motorola W150i is simple. Phone is auto powered on with charger connected; battery presence is not required. Pin TMODE has to be connected to GND in order to enable JTAG connection.
Please note, MSM6000 draws power from JTAG pins, thus board can be detected via JTAG even without any power supplied. But for successful resurrection the power (battery or charger) is required. Thus when resurrection is complete don’t forget to disconnect phone from RIFF BOX to de-power it completely.


To resurrect Motorola W150i:
Solder JTAG cable to Motorola W150i JTAG pads;
Connect charger for auto power on or use battery;
Make sure Motorola W150i is selected in the list of models;
Click Resurrect button;
Choose which areas to flash;
Wait till software signals a successful operation completion;
De-solder JTAG wires;
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

klmobile198
22-04-2011, 05:57 AM
21.04.2011 CDMA Haier C300 Repair supported
Resurrecting Haier C300 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
To resurrect Haier C300:


Solder JTAG cable to Haier C300 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Haier C300 is selected in the list of models;
Click Resurrect button;
Choose which areas to flash;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/haier-c300.jpg (http://www.jtagbox.com/wp-content/uploads/2011/04/haier-c300.jpg)
21.04.2011 JTAG Manager 1.32 released
---------------------------


Resurrector DLLs can now request current Memory Chip IDs

This is most usefull for NOR-based devices since sometimes such devices require different firmware for different NOR memory chip IDs. Thus resurrector DLLs will be able to perform automatic selection of resurrection data.


Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

klmobile198
22-04-2011, 05:46 PM
22.04.2011 CDMA Haier C3010, LG LSP450T Repair supported
Resurrecting Haier C3010 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chips with IDs 0x00EC/0x257E and 0x017E/0×2210. Proper data will be selected automatically depending on memory ID in your device.
To resurrect Haier C3010:


Solder JTAG cable to Haier C3010 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Haier C3010 is selected in the list of models;
Click Resurrect button;
Choose which areas to flash;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

Resurrecting LG LSP450T is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0×0020/0×8867
To resurrect LG LSP450T:


Solder JTAG cable to LG LSP450T JTAG pads;
Insert USB Data cable into board and PC;
Make sure LG LSP450T is selected in the list of models;
Click Resurrect button;
Choose which areas to flash;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/haier-c3010.jpg (http://www.jtagbox.com/wp-content/uploads/2011/04/haier-c3010.jpg)

klmobile198
23-04-2011, 05:37 AM
22.04.2011 CDMA Haier C2040 Repair supported
Resurrecting Haier C2040 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x00EC/0x257E
To resurrect Haier C2040:


Solder JTAG cable to Haier C2040 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Haier C2040 is selected in the list of models;
Click Resurrect button;
Choose which areas to flash;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/c2040.jpg (http://www.jtagbox.com/wp-content/uploads/2011/04/c2040.jpg)

klmobile198
23-04-2011, 05:38 AM
22.04.2011 CDMA Haier C5100 Repair supported
Resurrecting Haier C5100 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x00EC/0x257E
To resurrect Haier C5100:


Solder JTAG cable to Haier C5100 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Haier C5100 is selected in the list of models;
Click Resurrect button;
Choose which areas to flash;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/haier-c5100.gif (http://www.jtagbox.com/wp-content/uploads/2011/04/haier-c5100.gif)

klmobile198
23-04-2011, 05:38 AM
22.04.2011 CDMA Haier C6000 Repair supported
Resurrecting Haier C6000 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x017E/0×2210
To resurrect Haier C6000:


Solder JTAG cable to Haier C6000 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Haier C6000 is selected in the list of models;
Click Resurrect button;
Choose which areas to flash;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/haier_c6000_240x300_11.jpg (http://www.jtagbox.com/wp-content/uploads/2011/04/haier_c6000_240x300_11.jpg)

klmobile198
23-04-2011, 05:39 AM
22.04.2011 CDMA ZTE C370 Repair supported
Resurrecting ZTE C370 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0×0098/0×0096
To resurrect ZTE C370:


Solder JTAG cable to ZTE C370 JTAG pads;
Insert USB Data cable into board and PC;
Make sure ZTE C370 is selected in the list of models;
Click Resurrect button;
Choose which areas to flash;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/zte-c370.jpg (http://www.jtagbox.com/wp-content/uploads/2011/04/zte-c370.jpg)

klmobile198
23-04-2011, 05:39 AM
22.04.2011 HTC 7 Trophy T8686 (HTC Spark) Unbrick, Unlock, IMEI Repair, CID Update, ModelID Repair supported
Resurrecting HTC Trophy is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.75.1000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PC4010000′.
To resurrect HTC Trophy:


Solder JTAG cable to HTC Trophy JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC Trophy is selected in the list of models;
If you use battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/HTC-7-Trophy.gif (http://www.jtagbox.com/wp-content/uploads/2011/04/HTC-7-Trophy.gif)

THANHLUAN™
23-04-2011, 08:59 AM
So, its resurrection times

Updates for today :


* RIFF JTAG – HTC 7 Trophy T8686 (HTC Spark) Unbrick, Unlock, IMEI Repair, CID Update, ModelID Repair supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-htc-7-trophy-t8686-htc-spark-unbrick-unlock-imei-repair-cid-update-modelid-repair-supported/)
* RIFF JTAG – CDMA ZTE C370 Repair supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-zte-c370-repair-supported/)
* RIFF JTAG – CDMA Haier C6000 Repair supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-haier-c6000-repair-supported/)
* RIFF JTAG – CDMA Haier C5100 Repair supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-haier-c5100-repair-supported/)
* RIFF JTAG – CDMA Haier C2040 Repair supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-haier-c2040-repair-supported/)Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

Nhất Vũ
26-04-2011, 03:10 PM
26.04.2011 CDMA Samsung S239 (MPower) Repair supported
Resurrecting Samsung S239 is simple. Phone is auto powered on with USB Cable connected; battery presence is not required.
To resurrect Samsung S239:


Solder JTAG cable to Samsung S239 JTAG pads;
Connect ignition cable for auto power on or use battery;
Make sure Samsung S239 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/04/s239_wb_350x263.gif (http://www.jtagbox.com/wp-content/uploads/2011/04/s239_wb_350x263.gif)

Nhất Vũ
03-05-2011, 10:48 PM
RIFF JTAG - Samsung B2710 (Samsung Xcover 271) Unbrick / Repair supported

03.05.2011 Samsung B2710 (Samsung Xcover 271) Unbrick / Repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-b2710-samsung-xcover-271-unbrick-repair-supported/)


Samsung B2710 resurrection is simple. Phone is auto powered on when USB Cable and battery are connected.
To resurrect Samsung B2710 do this:


Solder JTAG cable to the Samsung B2710 JTAG pads;
Connect USB cable to phone and PC;
Make sure Samsung B2710 is selected in the list of models
Click Resurrect button;
Wait few seconds until software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ’9′ keys and press Power-On. Screen lights up with Download mode message.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/05/Samsung-B2710-Orange.jpg (http://www.jtagbox.com/wp-content/uploads/2011/05/Samsung-B2710-Orange.jpg)



RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

huythotnot
04-05-2011, 07:30 PM
04.05.2011 HTC Droid Incredible ADR6300 (HTC Incredible C) Unbrick Dead Boot Repair supported
(http://www.jtagbox.com/jtag-news/riff-jtag-htc-droid-incredible-adr6300-htc-incredible-c-unbrick-dead-boot-repair-supported/)

Resurrecting HTC Incredible C is easy. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PB3120000′.


To resurrect HTC Incredible C:


Solder JTAG cable to HTC Incredible C JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC Incredible C is selected in the list of models;
If you use battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.


To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume down’ key and press ‘Power ON’ button to enter HBoot menu;
Hold ‘Volume up’ key and press ‘Power ON’ button to enter Recovery mode;




04.05.2011 Samsung Nexus S (i9023) Unbrick Boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-nexus-i9023-unbrick-boot-repair-supported/)


Samsung I9023 is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in very rare cases it is possible that you will have to hold Power On key during initial connection.
Current resurrector has two different versions of primary boot loaders (PBL) embedded. This depends on hardware version of your phone which boot to use, thus in case of failure (cannot enter download mode after resurrection) of first loader try selecting another.
In case after resurrection (after you have tried with both boot versions) the download mode is not initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.


To resurrect Samsung I9023:


Solder JTAG cable to Samsung I9023 JTAG pads;
Connect microUSB cable to phone and PC;
Insert battery;
Make sure Samsung I9023 is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.


To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

Nhất Vũ
07-05-2011, 03:48 PM
07.05.2011 LG CU720 Shine Unbrick – Boot repair supported
Resurrecting LG CU720 is very hard because it requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).
Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
To resurrect LG CU720:


Solder JTAG cable to LG CU720 JTAG pads;
Insert USB Data cable into board and PC;
Make sure LG CU720 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.Đ
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/05/lg-mobile-CU720_Shine-3_4view-01-large_black.png (http://www.jtagbox.com/wp-content/uploads/2011/05/lg-mobile-CU720_Shine-3_4view-01-large_black.png)

klmobile198
10-05-2011, 05:38 AM
09.05.2011 RIFF JTAG – CDMA Day Again http://www.jtagbox.com/wp-includes/images/smilies/icon_smile.gif More power for Indian users !

Whats new:
Added Huawei CDMA models support :


Huawei C2823 Repair, Read/Write NOR flash
Huawei C2809 Repair, Read/Write NOR flash
Huawei C2808 Repair, Read/Write NOR flash
Huawei C2807 Repair, Read/Write NOR flash
Huawei C2607 Repair, Read/Write NOR flash
Huawei C2905 Repair, Read/Write NOR flash

Added ZTE CDMA Model :


ZTE C335 Repair, Read/Write NOR flash

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

klmobile198
11-05-2011, 06:06 AM
10.05.2011 CDMA LG VM265, CDMA Huawei Broadband Modem EC1260 supported
Resurrecting LG VM265 is easy. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
To resurrect LG VM265:


Solder JTAG cable to LG VM265 JTAG pads;
Insert USB Data cable into board and PC;
Make sure LG VM265 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
http://www.jtagbox.com/wp-content/uploads/2011/05/lg-mobile-VM265-large.png (http://www.jtagbox.com/wp-content/uploads/2011/05/lg-mobile-VM265-large.png)


Resurrecting Huawei EC1260 is simple. Just make sure you solder all JTAG signals and insert modem into a USB port for it to get powered.
If modem is not detected by RIFFBOX JTAG, disconnect JTAG connector, re-insert modem into USB and then connect back the JTAG connector.
At resurrection startup you can select which zones are to be re-flashed. Thus you can save a lot of time if you know approximately which zone is damaged. Select EFS or MMC areas to be flashed only in case you are sure those are damaged – these areas quite big in size; unnecessary reflash is just a waste of time.
Please note, if you chose EFS to be repaired, an original ESN will be lost and substituted with the one contained in resurrection data. Current resurrector does not support ESN repair.
To resurrect Huawei EC1260:


Solder JTAG cable to Huawei EC1260 JTAG pads;
Insert Huawei EC1260 modem into any USB port for power;
Make sure Huawei EC1260 is selected in the list of models;
Click Resurrect button;
After Selection Dialog popup choose zones to be flashed;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

http://www.jtagbox.com/wp-content/uploads/2011/05/ec1260.gif (http://www.jtagbox.com/wp-content/uploads/2011/05/ec1260.gif)

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

huythotnot
12-05-2011, 09:18 PM
12.05.2011 Samsung Galaxy Ace S5830 Unbrick – Boot repair supported

(http://www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-ace-s5830-unbrick-boot-repair-supported/)
Samsung S5830 resurrection is simple. Phone is auto powered when USB Data Cable is inserted while battery is inside. If you don’t use USB cable, make sure to hold Power On button during JTAG connection establishing phase.


To resurrect Samsung S5830 do this:


Solder JTAG cable to Samsung S5830 JTAG pads;
Insert battery and connect USB cable to phone and PC;
Make sure Samsung S5830 is selected in the list of models;
Click Resurrect button;
Wait few seconds until software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.


To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On to enter Download Mode;

12.05.2011 Huawei E5830 Broadband modem Unbrick – Boot repair supported
(http://www.jtagbox.com/jtag-news/riff-jtag-huawei-e5830-broadband-modem-unbrick-boot-repair-supported/)

Resurrecting Huawei E5830 is simple. Just make sure you solder all JTAG signals. Connection can be established with USB Cable connected, though in some rare cases battery presence may be required.
If modem is not detected by RIFFBOX JTAG, disconnect JTAG connector, re-insert modem into USB and then connect back the JTAG connector.
Please note, if only an USB cable is connected the device is detected by PC as unknown device. So, after resurrection in order to check if modem is alive make sure battery is connected.


To resurrect Huawei E5830:


Solder JTAG cable to Huawei E5830 JTAG pads;
Insert Huawei E5830 modem into any USB port for power;
Make sure Huawei E5830 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

12.05.2011 Samsung Eternity A867 Unbrick - Boot repair supported

(http://www.jtagbox.com/jtag-news/riff-jtag-samsung-eternity-a867-unbrick-boot-repair-supported/)
The Samsung A867 board is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.


To resurrect Samsung A867:


Solder JTAG cable to Samsung A867 JTAG pads;
Connect USB cable;
Make sure Samsung A867 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.


To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Camera’ keys and press ‘Power ON’ button.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

klmobile198
14-05-2011, 05:56 AM
13.05.2011 Samsung Z630 Unbrick – Boot repair supported
Resurrection of Samsung Z630 requires battery or external power supply. Most convenient way is to use additionally an USB cable: in this case power is auto powered on and there will be no need to hold power on key during connection startup.
Please note, phone will be detected even with only USB cable connected, but stable connection and stable data exchange will be achieved only when battery (or external power supply) is connected too.
To resurrect Samsung Z630:


Solder JTAG cable to Samsung Z630 JTAG pads;
Insert battery (or connect external power supply to the battery pads) and connect USB cable;
Make sure Samsung Z630 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ’4′ key and press ‘Power ON’ button. In few seconds you should see light-blue screen.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/05/samsung-z630.jpg (http://www.jtagbox.com/wp-content/uploads/2011/05/samsung-z630.jpg)

Dopod Magic A6188 (HTC Sapp400) Unbrick, Unlock, IMEI and CID repair supported
The HTC Magic (SAPP400) is based on ESM7206A chipset. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.53.02000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘SAPP*****’. Additionally, you can check ‘Repair RECOVERY zones’ to reflash android BOOT and RECOVERY code.
To resurrect HTC Magic (SAPP400):


Solder JTAG cable to HTC Magic (SAPP400) JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC Magic (SAPP400) is selected in the list of models;
If you use battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Back (←)’ key and press ‘Power ON’ button. In few seconds you should see download mode saying Fastboot USB.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/05/dopod_a6188.jpg (http://www.jtagbox.com/wp-content/uploads/2011/05/dopod_a6188.jpg)

13.05.2011 CDMA Huawei C5589 Unbrick – Boot repair supported


Resurrecting Huawei C5589 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x017E/0×2230
To resurrect Huawei C5589:


Solder JTAG cable to Huawei C5589 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Huawei C5589 is selected in the list of models;
Click Resurrect button;
Choose which areas to flash;
Wait till software signals a successful operation completion;
De-solder JTAG wires;


Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
http://www.jtagbox.com/wp-content/uploads/2011/05/huawei-c5589-cdma-mobile-phone.jpg (http://www.jtagbox.com/wp-content/uploads/2011/05/huawei-c5589-cdma-mobile-phone.jpg)

THANHLUAN™
02-06-2011, 06:35 AM
ORT JTAG- Lg RD3550 - Lg RD3600 - Zte AC8720 - Zte C207 - Huawei E1732 ORT - JTAG UPDATE
[ 2 june 2011 ]

Description :

: LG RD3550

: LG RD3600

: ZTE C207

: ZTE AC8720

: HUAWEI E1732 [ thx to Sabby_Singh]

gem38
11-06-2011, 01:42 AM
RIFF JTAG - More CDMA Models, new bug fix updates today
10.06.2011 More CDMA Models, new bug fix updates today
(http://www.jtagbox.com/jtag-news/riff-jtag-cdma-models-bug-fix-updates-today/)
Whats new :

CDMA Models JTAG support :


Huawei C2605
Micromax MMX 250C
ZTE WP829
LG RD3640
Bug fix updates :


Samsung S5830
HTC Incredible C
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF Box – JTAG Revolution (http://www.jtagbox.com)

congtoan
17-06-2011, 09:43 AM
RIFF JTAG – HTC Desire HD A9191 (HTC Ace) Unbrick, IMEI, CID, ModelID, Simlock repair
WHATS NEW!!!


- HTC Desire HD A9191 (HTC Ace) = Unbrick, IMEI, CID, ModelID, Simlock repair = WORLD FIRST ! ! !

RIFF JTAG - HTC Desire HD Discussion (Repair, Unlock, IMEI Repair) (http://forum.gsmhosting.com/vbb/f634/riff-jtag-htc-desire-hd-discussion-repair-unlock-imei-repair-1289758/)


Firmware 1.25
---------------------------
- added 5.0V USB Power On/Off controlling feature
- changed sequence for 32-bit write accesses for ARM11 core (MSM8xxx support)


JTAG Manager 1.33
---------------------------
- Improved connection policy:
Resurrection/DCC connection to device is implemented in such way that JTAG speed changes have 2 stages - booting stage and working stage.
Booting stage is the one from the connection start and until the DCC Loader upload is complete. Booting TCK/RTCK speed are setup
by JTAG Manager no matter what are the TCK settings by user (JTAG TCK Speed field in the JTAG Manager). Booting speed is hardcoded in the DLL.
After "booting" stage is complete, the "working" speed is set - the one which is selected by user in the JTAG TCK Speed field.
If Booting Speed in resurrector DLL is hardcoded as 'RTCK' the JTAG Manager would always use RTCK mode during booting stage.
Now policy is changed that is when user selects a fixed TCK frequency the JTAG Manager will automatically
change booting speed to the fixed TCK too.

- fixed bug: if "Use End Address" and "AutoFull Flash Size" were checked there was error setting valid length to read.

- for Advanced Users: advanced settings are now moved from the DCC Read/Write page ("Notifications...") into separate button on Box Service page (Advanced Settings button)

- added 5.0V USB Power On/Off controlling feature
For this go to Box Service page, click Advanced Settings: the Notifications dialog will be displayed,
go to "Advanced Settings" page and set desired mode for "Enable 5.0V output" checkbox.
When enabled, 5.0V power will be on after any "JTAG" operation executed and will remain "ON" until
box restart or until "Enable 5.0V output" checkbox is unchecked and any "JTAG" operation is executed.

- added optimization for flashing memory devices which are sector-based (like MDOC H3 or MMC/SD memory cards)

- if error code 0x3C (write-protect) is received no recover attempts are made.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

khaithotnot
17-06-2011, 10:17 AM
WHATS NEW!!!


- HTC Desire HD A9191 (HTC Ace) = Unbrick, IMEI, CID, ModelID, Simlock repair = WORLD FIRST ! ! !

RIFF JTAG - HTC Desire HD Discussion (Repair, Unlock, IMEI Repair) (http://forum.gsmhosting.com/vbb/f634/riff-jtag-htc-desire-hd-discussion-repair-unlock-imei-repair-1289758/)


Firmware 1.25
---------------------------
- added 5.0V USB Power On/Off controlling feature
- changed sequence for 32-bit write accesses for ARM11 core (MSM8xxx support)


JTAG Manager 1.33
---------------------------
- Improved connection policy:
Resurrection/DCC connection to device is implemented in such way that JTAG speed changes have 2 stages - booting stage and working stage.
Booting stage is the one from the connection start and until the DCC Loader upload is complete. Booting TCK/RTCK speed are setup
by JTAG Manager no matter what are the TCK settings by user (JTAG TCK Speed field in the JTAG Manager). Booting speed is hardcoded in the DLL.
After "booting" stage is complete, the "working" speed is set - the one which is selected by user in the JTAG TCK Speed field.
If Booting Speed in resurrector DLL is hardcoded as 'RTCK' the JTAG Manager would always use RTCK mode during booting stage.
Now policy is changed that is when user selects a fixed TCK frequency the JTAG Manager will automatically
change booting speed to the fixed TCK too.

- fixed bug: if "Use End Address" and "AutoFull Flash Size" were checked there was error setting valid length to read.

- for Advanced Users: advanced settings are now moved from the DCC Read/Write page ("Notifications...") into separate button on Box Service page (Advanced Settings button)

- added 5.0V USB Power On/Off controlling feature
For this go to Box Service page, click Advanced Settings: the Notifications dialog will be displayed,
go to "Advanced Settings" page and set desired mode for "Enable 5.0V output" checkbox.
When enabled, 5.0V power will be on after any "JTAG" operation executed and will remain "ON" until
box restart or until "Enable 5.0V output" checkbox is unchecked and any "JTAG" operation is executed.

- added optimization for flashing memory devices which are sector-based (like MDOC H3 or MMC/SD memory cards)

- if error code 0x3C (write-protect) is received no recover attempts are made.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

GIALAI_GSM
22-06-2011, 07:36 PM
RIFF JTAG - CDMA Updates again 22.06.2011 CDMA day again, 3 new models supported (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-day-3-models-supported/)


Whats new:

Motorola W200 full support
Huawei C2801 full support
Nokia 1006 full support

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

Dont forget to check previous updates :

RIFF JTAG – HTC Desire HD A9191 (HTC Ace) Unbrick, IMEI, CID, ModelID, Simlock repair « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-htc-desire-hd-a9191-htc-ace-unbrick-imei-cid-modelid-simlock-repair/),

RIFF JTAG – JTAG Manager v1.33, RIFF Box firmware v1.25 released « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-jtag-manager-v133-riff-box-firmware-v125-released/)


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

GIALAI_GSM
07-07-2011, 10:32 PM
RIFF JTAG - HTC Wildfire S A510E (HTC Marvel), 7 More CDMA models supported
07.07.2011 HTC Wildfire S A510E (HTC Marvel), More CDMA models supported. (http://www.jtagbox.com/jtag-news/riff-jtag-htc-wildfire-s-a510e-htc-marvel-more-cdma-models-supported/)

Resurrecting HTC WildFireS is easy. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.01.0002 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PC4910000′. Additionally, you can check ‘Repair RECOVERY zones’ to reflash android BOOT and RECOVERY code.
To resurrect HTC WildFireS:

Solder JTAG cable to HTC WildFireS JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC WildFireS is selected in the list of models;
If you use battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:

Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button. In few seconds you should see usual android boot mode screen.




Following CDMA models are supported from today :



Samsung B139 Repair/Unbrick, Read/Write NOR Flash
Samsung B259 Repair/Unbrick, Read/Write NOR Flash
Samsung B309 Repair/Unbrick, Read/Write NOR Flash
Samsung B319 Repair/Unbrick, Read/Write NOR Flash
Samsung B379 Repair/Unbrick, Read/Write NOR Flash
Samsung B619 Repair/Unbrick, Read/Write NOR Flash
Huawei C31 Repair, Read/Write NOR flash

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

klmobile198
12-07-2011, 06:30 PM
12.07.2011 Samsung T749, Samsung E189 Unbrick – Boot repair supported
(http://www.jtagbox.com/jtag-news/riff-jtag-samsung-t749-samsung-e189-unbrick-boot-repair-supported/)

The Samsung T749 board is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.

To resurrect Samsung T749:


Solder JTAG cable to Samsung T749 JTAG pads;
Connect USB cable;
Make sure Samsung T749 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
In case you cannot find firmware files use Global RIFF Link & Data Exchange plugin – at the moment of resurrector release there was shared full dump from alive Samsung T749 phone.

To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Up’ and ‘Camera’ keys and press ‘Power ON’ button.




Resurrecting Samsung E189 is simple.

Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x00EC/0×2256

To resurrect Samsung E189:


Solder JTAG cable to Samsung E189 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Samsung E189 is selected in the list of models;
Click Resurrect button;
Choose which areas to flash;
Wait till software signals a successful operation completion;
De-solder JTAG wires;




Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

klmobile198
16-07-2011, 05:44 AM
Here is short list of latest news :

RIFF JTAG – Qtek 9000 (HTC Universal) Unbrick – Boot repair supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-qtek-9000-htc-universal-unbrick-boot-repair-supported/)

Other names for this device :


I-Mate JASJAR (HTC Universal) (http://pdadb.net/index.php?m=specs&id=312&c=i-mate_jasjar_htc_universal)


Dopod 900 (HTC Universal) (http://pdadb.net/index.php?m=specs&id=371&c=dopod_900_htc_universal)


O2 XDA Exec (HTC Universal) (http://pdadb.net/index.php?m=specs&id=313&c=o2_xda_exec_htc_universal)


T-Mobile MDA Pro (HTC Universal) (http://pdadb.net/index.php?m=specs&id=148&c=t-mobile_mda_pro_htc_universal)


Orange SPV M5000 (HTC Universal) (http://pdadb.net/index.php?m=specs&id=311&c=orange_spv_m5000_htc_universal)


Qtek 9000 (HTC Universal) (http://pdadb.net/index.php?m=specs&id=310&c=qtek_9000_htc_universal)


Grundig GR980 (HTC Universal) (http://pdadb.net/index.php?m=specs&id=1027&c=grundig_gr980_htc_universal)


Vodafone VPA IV / v1640 (HTC Universal) (http://pdadb.net/index.php?m=specs&id=149&c=vodafone_vpa_iv__v1640_htc_universal)



Bug fix updates :



HTC_Wildfire.dll

- Added feature to flash RECOVERY and BOOT zones during resurrection.
- Added code reading option
HTC_WildfireS.dll
- By mistake was released DLL for usual HTC Wildfire model. Now is ok. http://forum.gsmhosting.com/ubb/biggrin.gif

Thanks to Tatek and Basar for help. Free beers for both http://forum.gsmhosting.com/ubb/smile.gif

Qualcomm Partition tool 1.04 :



Added support for 4kb page code reading (Applies to HTC Models)

In case You want to read unlock code from dump with 4kb page, and You get "Simlock zone is not found" message, tick "Don't adjust HTC Partition for 4kb NAND pages" check box, and read partition again.

Beta testers required for Samsung Galaxy S II :

Samsung Galaxy S2 i9100 wanted for beta test ! ! ! (http://forum.gsmhosting.com/vbb/f634/samsung-galaxy-s2-i9100-wanted-beta-test-1309359/)

Support for Exynos 4210 Samsung CPU is added, and will be released after tests.


Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

klmobile198
29-07-2011, 06:09 PM
29.07.2011 Samsung GT-i8700 Omnia 7 , Samsung W299 Duos Unbrick – Boot repair supported
Resurrecting Samsung I8700 is simple. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside. In case you use the battery only please note you will have to press Power On key once.
To resurrect Samsung I8700:


Solder JTAG cable to Samsung I8700 JTAG pads;
Make sure Samsung I8700 is selected in the list of models;
Insert Battery into phone and connect USB cable (in case you not use USB cable, press once the Power ON key on the phone)
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Up’ and ‘Camera’ keys and press ‘Power ON’ button. In few seconds phone enters download mode.

http://www.jtagbox.com/wp-content/uploads/2011/07/samsung_i8700_black_1.jpg (http://www.jtagbox.com/wp-content/uploads/2011/07/samsung_i8700_black_1.jpg)


Resurrecting Samsung W299 is simple. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside. In case you use the battery only please note you will have to press Power On key once.
To resurrect Samsung W299:


Solder JTAG cable to Samsung W299 JTAG pads;
Make sure Samsung W299 is selected in the list of models;
Insert Battery into phone and connect USB cable (in case you not use USB cable, press once the Power ON key on the phone)
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
http://www.jtagbox.com/wp-content/uploads/2011/07/samsung-w299-duos-touch-dual-sim-phone.jpg (http://www.jtagbox.com/wp-content/uploads/2011/07/samsung-w299-duos-touch-dual-sim-phone.jpg)
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

Smart_Moto™
29-07-2011, 11:57 PM
29.07.2011 New RIFF JTAG Updates :

- RIFF JTAG Manager v1.34
- RIFF Box firmware v1.26
- RIFF GDB Server v1.04 (http://www.jtagbox.com/jtag-news/riff-jtag-jtag-manager-v134-riff-box-firmware-v126-cortexa9-dual-core-support-added-gdb-server-v104-released/)

With new release we added support for new ARM core(s) - Cortex-A9 in single core and multicore configuration.

Project now supports Unicode, so there is Russian and Chinese language available !

JTAG Manager now supports 64bit addressing, thus allowing You to dump large memory chips (eMMC and iNAND) !

New resurrectors DLL-s


- Samsung Galaxy S II (Samsung i9100) Unbrick, Boot repair (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-i9100-galaxy-ii-unbrick-boot-repair-supported-world/)
- SonyEricsson x10 Unbrick, Boot repair
- Samsung CDMA B119 (http://www.jtagbox.com/category/jtag-news/)

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

NoName
02-08-2011, 09:07 PM
Sony Ericsson Xperia X8a (SE Shakira) Unbrick – Boot repair supported

Resurrecting SE X8 is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted.
During resurrection, you can select which areas to be repaired. So you can choose only those areas which you know are damaged thus saving flashing time.
To resurrect SE X8:



Solder JTAG cable to SE X8 JTAG pads;
Insert USB Data cable into board and PC;
Make sure SE X8 is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
http://www.jtagbox.com/wp-content/uploads/2011/08/sony_ericsson_xperia_x8.jpg
lease click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

NoName
02-08-2011, 10:06 PM
02.08.2011
Sony Ericsson Xperia X10a mini / E10a (SE Robyn) Unbrick – Boot repair supported

Resurrecting SE X10 Mini is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted.
During resurrection, you can select which areas to be repaired. So you can choose only those areas which you know are damaged thus saving flashing time.
To resurrect SE X10 Mini:


Solder JTAG cable to SE X10 Mini JTAG pads;
Insert USB Data cable into board and PC;
Make sure SE X10 Mini is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
http://www.jtagbox.com/wp-content/uploads/2011/08/sony_ericsson_x10_mini_front.jpg
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

klmobile198
03-08-2011, 08:36 PM
03.08.2011 Samsung Galaxy Tab M180s Unbrick – Boot Repair supported
Samsung M180S is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in some cases it is possible that you will have to hold Power On key during initial connection.
In case after resurrection (after you have tried with both boot versions) the download mode is not initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.
To resurrect Samsung M180S:


Solder JTAG cable to Samsung M180S JTAG pads;
Connect USB cable to phone and PC;
Attach battery connector;
Make sure Samsung M180S is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

http://www.jtagbox.com/wp-content/uploads/2011/08/m180s.jpg (http://www.jtagbox.com/wp-content/uploads/2011/08/m180s.jpg)

Bug fix update :




Samsung S5830 (http://forum.gsmhosting.com/vbb/f634/riff-jtag-bug-fix-updates-1245731/index2.html#post7590265)

Improved resurrection by adding few more zones to be reflashed.
Fixed issue with NAND chip not being detected (0xAAAA/0xAAAA ID)
CPU ID 0x303C10E1 added to allowed list




(http://www.jtagbox.com/wp-content/uploads/2011/08/m180s.jpg)
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

gem38
04-08-2011, 01:15 PM
up bản này bật tool ko lên , vô C:\Program Files\RIFF Box JTAG Manager\Languages xóa 2 file lang dll là oki

congtoan
04-08-2011, 06:11 PM
RIFF JTAG - JTAG Manager v1.35 released
04.08.2011 JTAG Manager v1.35 released (http://www.jtagbox.com/jtag-news/riff-jtag-jtag-manager-v135-released/)

Whats new :



Added an arbitrary feature “Settings by Code” to the DCC Read/Write page.

Main purpose is to improve support quality for users: via “Settings Code” string a supporter person sees all settings which were set by user on the DCC Read/Write page.
Though, end-user may benefit from this too: Use “Settings Code” string for JTAG Manager to automatically setup all DCC Read/Write settings


Fixed data loss during read and save operations in case there is not enough disk space available to store required amount of data.

(for example reading full on DCC Read/Write page, or saving read full, etc).
Now available disk space checks are performed prior disk write operations.


Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

klmobile198
23-08-2011, 07:40 PM
23.08.2011 Samsung Galaxy GIO (S5660) Unbrick – Boot repair supported

(http://www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-gio-s5660-unbrick-boot-repair-supported/)
Samsung S5660 resurrection is simple. Phone is auto powered when USB Data Cable is inserted while battery is inside. If you don’t use USB cable, make sure to hold Power On button during JTAG connection establishing phase.


To resurrect Samsung S5660 do this:


Solder JTAG cable to Samsung S5660 JTAG pads;
Insert battery and connect USB cable to phone and PC;
Make sure Samsung S5660 is selected in the list of models;
Click Resurrect button;
Wait few seconds until software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.


To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘OK’ keys and press Power-On to enter Download Mode;

http://www.jtagbox.com/wp-content/uploads/2011/08/samsung-s5660-galaxy-gio.jpg (http://www.jtagbox.com/wp-content/uploads/2011/08/samsung-s5660-galaxy-gio.jpg)


Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

Nhất Vũ
25-08-2011, 07:05 PM
25.08.2011 HTC Wizard 200 Unbrick – Boot repair supported

(http://www.jtagbox.com/jtag-news/riff-jtag-htc-wizard-200-unbrick-boot-repair-supported/)
Resurrection of HTC Wizard 200 is simple. Battery must be connected in order to establish JTAG connection.
Current resurrector works with devices based on G4 MDOC chip.
Resurrector can repair IPL and SPL areas (which areas to repair you can select in popup window).
Please note: DiskOnChip G4 memory has security features, due to which there is a risk of permanently blocking the access to the flash memory while re-flashing the IPL area. Thus be very carefull not to interrupt IPL repair process (in case you have selected IPL area to be repaired).
In case your device has permanently blocked MDOC memory you will see this error:


************************************************** **************
Detected a Not Initialized FLASH1 Chip ID: 0×0400/0xFBFF
ERROR: Selected FLASH Chip was not initialized by the DCC Loader
************************************************** **************

This can happen due to unknown protection keys used or due to permanently blocked MDOC chip. If latter is true we advise you to solder a new flash memory chip or throw this phone away to the trash bin.

To resurrect HTC Wizard:


Solder JTAG cable to HTC Wizard JTAG pads;
Insert battery and connect USB cable to phone and PC;
Make sure HTC Wizard is selected in the list of models;
Press Power On key
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Camera’ key and press ‘Power ON’ button.

http://www.jtagbox.com/wp-content/uploads/2011/08/htc-wizard.jpg (http://www.jtagbox.com/wp-content/uploads/2011/08/htc-wizard.jpg)



Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

GIALAI_GSM
30-08-2011, 11:31 PM
RIFF JTAG - 7 new models added - read inside !
30.08.2011 RIFF JTAG - 7 new models added !

Whats new :



LG Models :

LG GM730 (http://www.jtagbox.com/jtag-news/riff-jtag-lg-gm730-unbrick-boot-repair-supported/)
LG TD636 (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-lg-td636-unbrick-boot-repair-supported/)


Samsung :

Samsung i5510 (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-551-i5510-unbrick-boot-repair-supported/)
Samsung A837 (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-a837-unbrick-boot-repair-supported/)


Sierra Wireless

Sierra 597 Compass (http://www.jtagbox.com/jtag-news/riff-jtag-sierra-wireless-597-aircard-unbrick-boot-repair-supported/)
Sierra U595 (http://www.jtagbox.com/jtag-news/riff-jtag-sierra-wireless-u595-usb-modem-unbrick-boot-repair-supported/)


Pantech :

Pantech UM150 (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-pantech-um150-usb-modem-supported/)




Please click "Check For Updates" button in order to download and apply new updates.

RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

klmobile198
09-09-2011, 07:40 PM
09.09.2011 HTC Desire S S510E (HTC Saga) – Unbrick, Unlock, CID, IMEI Update supported
Resurrecting HTC Desire S is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Some (or all) revisions of HTC Desire S boards have JTAG interface disabled (that is enable MARM JTAG Fuse is blown in the MSM8255 chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write PDA’s SPL to 0.98.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG8810000’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE blown then there is no way to resurrect your phone via JTAG interface.
To resurrect HTC Desire S:


Solder JTAG cable to HTC Desire S JTAG pads;
Insert batter and connect USB Data cable;
Make sure HTC Desire S is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

http://www.jtagbox.com/wp-content/uploads/2011/09/HTC-Desire-S1.jpg (http://www.jtagbox.com/wp-content/uploads/2011/09/HTC-Desire-S1.jpg)
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

livemobi
01-10-2011, 02:32 AM
30.09.2011 RIFF JTAG - New Samsung and CDMA updates !

Whats new :



Added support for Samsung AnyCall m110s (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-anycall-m110s-unbrick-dead-boot-repair-supported/)
Added support for Samsung Wave II (S8530) (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-wave-ii-s8530-unbrick-boot-repair-supported/)
Added support for Sungil SXC1080 CDMA Modem (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-sungil-sxc1080-modem-supported/)


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

klmobile198
03-10-2011, 05:59 PM
03.10.2011 CDMA Samsung B209 Breeze Supported

(http://www.jtagbox.com/jtag-news/riff-jtag-cdma-samsung-b209-breeze-supported/)
Resurrecting Samsung B209 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x00EC/0×2256
To resurrect Samsung B209:


Solder JTAG cable to Samsung B209 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Samsung B209 is selected in the list of models;
Click Resurrect button;
Choose which areas to flash;
Wait till software signals a successful operation completion;
De-solder JTAG wires;


http://www.jtagbox.com/wp-content/uploads/2011/10/samsung-b209-breeze-1.jpg (http://www.jtagbox.com/wp-content/uploads/2011/10/samsung-b209-breeze-1.jpg)

klmobile198
03-10-2011, 06:00 PM
03.10.2011 Samsung S7330 Unbrick, Boot repair supported

(http://www.jtagbox.com/jtag-news/riff-jtag-samsung-s7330-unbrick-boot-repair-supported/)
The Samsung S7330 board is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
To resurrect Samsung S7330:


Solder JTAG cable to Samsung S7330 JTAG pads;
Connect USB cable;
Make sure Samsung S7330 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘9’ key and press ‘Power ON’ button.




http://www.jtagbox.com/wp-content/uploads/2011/10/Samsung-S7330.jpg (http://www.jtagbox.com/wp-content/uploads/2011/10/Samsung-S7330.jpg)

klmobile198
04-10-2011, 04:07 PM
04.10.2011 Samsung Focus (i917) Unbrick, Dead boot repair supported
(http://www.jtagbox.com/jtag-news/riff-jtag-samsung-focus-i917-unbrick-dead-boot-repair-supported/)

Resurrecting Samsung I917 is simple. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside. In case you use the battery only please note you will have to press Power On key once.

To resurrect Samsung I917:


Solder JTAG cable to Samsung I917 JTAG pads;
Make sure Samsung I917 is selected in the list of models;
Insert Battery into phone and connect USB cable (in case you not use USB cable, press once the Power ON key on the phone)
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Up’ and ‘Camera’ keys and press ‘Power ON’ button. In few seconds phone enters download mode.

http://www.jtagbox.com/wp-content/uploads/2011/10/samsung-i917-focus-att-unlocked-380.jpg (http://www.jtagbox.com/wp-content/uploads/2011/10/samsung-i917-focus-att-unlocked-380.jpg)

Guest™
04-10-2011, 04:07 PM
04.10.2011 Samsung Focus (i917) Unbrick, Dead boot repair supported
(http://www.jtagbox.com/jtag-news/riff-jtag-samsung-focus-i917-unbrick-dead-boot-repair-supported/)

Resurrecting Samsung I917 is simple. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside. In case you use the battery only please note you will have to press Power On key once.

To resurrect Samsung I917:


Solder JTAG cable to Samsung I917 JTAG pads;
Make sure Samsung I917 is selected in the list of models;
Insert Battery into phone and connect USB cable (in case you not use USB cable, press once the Power ON key on the phone)
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Up’ and ‘Camera’ keys and press ‘Power ON’ button. In few seconds phone enters download mode.

klmobile198
06-10-2011, 06:39 PM
07.10.2011 JTAG Manager v1.36, RIFF Box firmware v1.27 released
Whats new :
JTAG Manager 1.36
—————————
- Added fast presets for automatic selection of settings for most common operations on DCC Read/Write page
For this click Settings by Code button and select a desired preset from list and then click Apply Settings.
For example if user selects “Write Full Image into NAND memory” the valid settings on the DCC Read/Write page
for writting full images into devices with NAND memory will be automatically selected
- Fixed serious bug which caused resurrector DLLs which do upload data into RAM to upload broken data
For example DLLs which start Downlad Mode directly use this feature.
- Added feature to accept text name of memory chip from DCC Loader and display it (currently used to display eMMC memory product name)
- Fixed bug for resumming interrupted DCC Read: ifvcurrently cached file size was greater than > 2GB
(that is if read was interrupted on point when there was already more than 2GB of data read) the new reading data was not appended to the readout file end, but instead the file was corrupted.
- Fixed bug for saving big files (after reading on DCC Read/Write page): if size exceeded 0x7FFFFFFF bytes JTAG Manager show no free disk space error.
- Added TEGRA2 chipset selection in the Target list
- Fixed an issue with the resurrection progress bar: in some cases during resurrection operations the progress bar would always stay at 0%.
Firmware 1.27
—————————
- Added TEGRA2 debugging support (dual-core Cortex-A9)
- Added new breakpoint type: “address mismatch” which allows geniune single-stepping on Cortex-A8,A9 (CoreSight) targets
(thus GDB Server can now perform low-level single step commands)
RIFF GDB Server v1.05
—————————–
- Added Thumb2 instructions CBNZ and CBZ for single stepping
- Added more Thumb2 32-bit branch exctructions for single stepping
- Added CoreSight low-level signle-stepping support (at least RIFF BOX Firmware v1.27 is required)




Bug fixes :


Samsung_M110S.dll
-------------------------------------
- pinout picture was corrected
Samsung_I9100.dll
-------------------------------------
- DCC Loader now will report eMCC Card product name
HTC_DesireHD.dll, HTC_DesireS.dll
-------------------------------------
- DCC Loader now will report eMCC Card product name
- Resurrection interface was changed to a more flexible one
Samsung_I917.dll
-------------------------------------
- added resurrection data for phone revisions with 2KB-paged NAND chips

klmobile198
07-10-2011, 05:53 PM
07.10.2011 CDMA Samsung F619 supported
The Samsung F619 board is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
To resurrect Samsung F619:


Solder JTAG cable to Samsung F619 JTAG pads;
Connect USB cable;
Make sure Samsung F619 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘9’ key and press ‘Power ON’ button.

http://www.jtagbox.com/wp-content/uploads/2011/10/26212914SB.jpg (http://www.jtagbox.com/wp-content/uploads/2011/10/26212914SB.jpg)

klmobile198
07-10-2011, 05:53 PM
07.10.2011 Samsung i997 infuse 4g Unbrick, Boot repair supported

Samsung I997 is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in very rare cases it is possible that you will have to hold Power On key during initial connection.
In case after resurrection (after you have tried with both boot versions) the download mode is not initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.
To resurrect Samsung I997:


Solder JTAG cable to Samsung I997 JTAG pads;
Connect microUSB cable to phone and PC;
Insert battery;
Make sure Samsung I997 is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

http://www.jtagbox.com/wp-content/uploads/2011/10/Samsung-i997-Infuse-4G.jpg (http://www.jtagbox.com/wp-content/uploads/2011/10/Samsung-i997-Infuse-4G.jpg)

klmobile198
08-10-2011, 06:10 AM
07.10.2011 Samsung Galaxy II, OMAP4430 version supported (Samsung i9100G, Samsung i9108)
Samsung I9108 is based on the OMAP4430 Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface. There is a big variety of versions of Galaxy II devices: GT-I9100, GT-I9100G, GT-I9100L, GT-I9100M, GT-I9100T, GT-I9101, GT-I9103, GT-I9108, GT-I9188, and maybe more. Some of them are based on different hardware platform – the Samsung S5PV310 (Cortex-A9 Dual-Core). Thus make sure first which exact hardware version you have on hands.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
Current DLL is still a beta one. It will work only with phones which have killed X-Loader.
To resurrect Samsung I9108:


Solder JTAG cable to Samsung I9108 JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung I9108 is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

http://www.jtagbox.com/wp-content/uploads/2011/10/Samsung-I9100-Galaxy-S-II.jpg (http://www.jtagbox.com/wp-content/uploads/2011/10/Samsung-I9100-Galaxy-S-II.jpg)

Guest™
12-10-2011, 07:27 PM
Resurrecting HTC Desire Z is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Some (or all) revisions of HTC Desire Z boards have JTAG interface disabled (that is enable MARM JTAG Fuse is blown in the MSM7230 chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write one of selected PDA’s SPL versions (0.76.2000 or 0.85.0005). Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PC1010000’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE blown then there is no way to resurrect your phone via JTAG interface.
To resurrect HTC Desire Z:


Solder JTAG cable to HTC Desire Z JTAG pads;
Insert batter and connect USB Data cable;
Make sure HTC Desire Z is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

http://www.jtagbox.com/wp-content/uploads/2011/10/HTC-Desire-Z-pictures-3.jpg (http://www.jtagbox.com/wp-content/uploads/2011/10/HTC-Desire-Z-pictures-3.jpg)

GIALAI_GSM
20-10-2011, 09:48 PM
RIFF JTAG - Samsung updates ! 19.10.2011 RIFF JTAG – Samsung Z500 supported !

Whats new :

Added support for: Samsung Z500 (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-z500-supported/)


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

thanhtunggialai™
24-10-2011, 10:06 PM
24.10.2011 HTC & Samsung updates !

Whats new :

Added support for: HTC Supersonic (EVO 4G) (http://www.jtagbox.com/jtag-news/riff-jtag-htc-supersonic-evo-4g-unbrick-unlock-imei-cid-modelid-repair-supported/)

Added support for: Samsung i520 (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-i520-pda-modem-parts-supported/)

Added support for: Samsung Corby II – S3850 (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-corby-ii-s3850-supported/)


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

GIALAI_GSM
25-10-2011, 01:53 PM
RIFF JTAG - LG & HTC updates !

24.10.2011 RIFF JTAG - LG & HTC updates !


Whats new :

Added support for: LG SH860 (http://www.jtagbox.com/jtag-news/riff-jtag-lg-sh860-supported/)

Added support for: HTC Desire CDMA (http://www.jtagbox.com/jtag-news/riff-jtag-htc-desire-cdma-supported/)


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

Nhất Vũ
27-10-2011, 12:44 AM
26.10.2011 Samsung Galaxy S Plus (i9001) Unbrick, boot repair supported

Whats new : Samsung Galaxy S Plus (i9001) (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-unbrick-boot-repair-supported/)
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

Nhất Vũ
28-10-2011, 10:38 PM
RIFF JTAG - Samsung i9003, Samsung m820 supported 28.10.2011 - RIFF JTAG Updates

Whats new :



Samsung i9003 (Samsung Galaxy SL) Unbrick, boot repair (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-i9003-galaxy-sl-unbrick-boot-repair-supported/)
Samsung m820 (Samsung Galaxy Prevail) Unbrick, boot repair (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-m820-galaxy-prevail-unbrick-boot-repair-supported/)
ZTE RD518 Boot repair (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-zte-r518-supported/)


To download and install updates, please close all running applications and press "Check for Updates" button in RIFF JTAG Manager.

Carefully read resurrection manual for i9003 to avoid frustration ! http://forum.gsmhosting.com/ubb/smile.gif


RIFF Box – JTAG Revolution (http://www.jtagbox.com/) Galaxy RulerZZZZZZZ

thanhtunggialai™
12-11-2011, 06:44 AM
11.11.2011 SonyEricsson Unlock/IMEI/TA Repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-unlockimeita-repair-sonyericsson-x8-x10-x10-mini-x10-mini-pro-e15-e10u20/)

Whats new :

With this release, we now support Unlock, IMEI repair and TA repair for listed SE models.
You can now totally rebuild software in these models, after replacing NAND chip for example. At the moment, we have following models released :



x8
x10
x10 mini
x10 mini pro

Remember that these models can have different names (e10, e15, u20 etc)
Please check up this link for more information :


RIFF JTAG – Unlock/IMEI/TA repair – SonyEricsson x8, x10, x10 Mini, x10 mini pro (e15, e10,u20 etc) « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-unlockimeita-repair-sonyericsson-x8-x10-x10-mini-x10-mini-pro-e15-e10u20/)



(http://www.jtagbox.com/jtag-news/riff-jtag-unlockimeita-repair-sonyericsson-x8-x10-x10-mini-x10-mini-pro-e15-e10u20/)
New JTAG Manager has been released too, together with new RIFF Box firmware. Please check this link for more :



RIFF JTAG – JTAG Manager v1.37, RIFF Box firmware v1.28 released « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-jtag-manager-v137-riff-box-firmware-v128-released/)


RIFF Box – JTAG Revolution (http://www.jtagbox.com/) - Galaxy RulerZZZZZZZZZZZZZZZZZ http://forum.gsmhosting.com/ubb/biggrin.gif

Guest™
19-11-2011, 06:14 PM
Resurrecting LG P999 Modem part is very hard because it requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).
Phone is auto powered on with USB Data Cable connected to the PC while battery is inside; sometimes during connection pressing Power On key may be required.
To resurrect LG P999 Modem Part:


Solder JTAG cable to LG P999 Modem JTAG pads;
Insert USB Data cable into board and PC;
Make sure LG P999 Modem is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

http://www.jtagbox.com/wp-content/uploads/2011/11/LG-G2x-P999-3.jpg

klmobile198
20-11-2011, 06:31 AM
19.11.2011 – QUALCOMM MDM6600 NAND Generic DLL released
Whats new:


QUALCOMM MDM6600 NAND DLL

Use this for phones which have MDM6600 in baseband – eg LG P999, iPhone 4s, and many other phones which use TEGRA2 AP CPU.



QUALCOMM MSM7227 OneNAND DLL (2kb page)
QUALCOMM MSM7227 OneNAND DLL (4kb page)
QUALCOMM QSC6xxx OneNAND DLL

All other QUALCOMM Generic DLL-s are now under same branch, so here is full revised list :



ESM7xxx L41 D04 NAND
MDM6600 NAND
MSM6xxx L06 D02 NAND
MSM7227 L41 D08 OneNAND
MSM7227 L41 D08 OneNAND 4k
MSM7xxx L41 D04 NAND
MSM7xxx L41 D08 NAND
QSC1100 x14 NOR
QSC60xx L18 D08 NOR
QSC6xx L20 D08 NOR
QSC60xx L24 D08 NOR
QSC6xxx L32 D08 NAND
QSC6xxx L36 D08 NAND
QSC6xxx L36 D08 OneNAND
QSD8xxx L41 D04 NAND

Press “Check for updates” button in order to download and install new files.

GIALAI_GSM
21-11-2011, 09:28 PM
RIFF JTAG - CDMA updates !
21.11.2011 CDMA Updates released (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-updates-released/)

Whats new:


Added repair support for ZTE F280
Added repair support for Micromax C100
Added repair support for Intex In50
Added repair support for Huawei ETS2225
Added repair support for Huawei ETS 2222
Added repair support for Huawei ETS2205



Please click “Check for Updates” button in Box Service TAB in order to download and install new files.

RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

Smart_Moto™
23-11-2011, 08:25 AM
Samsung P1010 is based on the OMAP3630 (ARM core is Cortex-A8).

Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in very rare cases it is possible that you will have to hold Power On key during initial connection.
In case after resurrection (after you have tried with both boot versions) the download mode is not initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.
Please note, in most cases you will be required to insert Samsung P1010 RIFF™ MagicCard into phone’s SD slot before starting resurrection. In case you don’t have such card yet, you can create it on the “Samsung P1010 RIFF™ MagicCard” page of the resurrector settings dialog.
This is IRAM version of the Samsung P1010 resurrector. We recommend you using it only in case you had problems connecting to phone with normal Samsung P1010 resurrector DLL.

To resurrect Samsung P1010:


* Solder JTAG cable to Samsung P1010 JTAG pads;
* Insert Samsung P1010 RIFF™ MagicCard into phone’s SD slot;
* Connect USB cable to phone and PC;
* Insert battery;
* Make sure Samsung P1010 is selected in the list of models;
* Click Resurrect button;
* Wait till software signals a successful operation completion;
* Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:


* Disconnect PC cable;
* Insert battery;
* Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

There are two DLL-s (Normal and iRAM version) – You can use iRam version in case normal one doesnt work properly. iRam version is much slower, but more robust.

http://www.jtagbox.com/wp-content/uploads/2011/11/samsung-galaxy-tab-verizon.jpg

CDMA Models added today :


* ZTE AC2766
* ZTE AC2746
* AnyData ADU555C

Please click “Check for Updates” button in order to download and install new updates.

Guest™
30-11-2011, 06:17 PM
Samsung C6712 resurrection is simple. Battery is not required. To power the board it’s most convenient to use an USB Data Cable.
In order to contact to JTAG pads you may need to carefully scratch off paint covering (mask layer) above them. Sometimes there is reset problem with these phones, thus you may need to disconnect and then connect USB cable again.
To resurrect Samsung C6712 do this:


Solder JTAG cable to Samsung C6712 JTAG pads;
Insert battery and connect USB cable to phone and PC;
Make sure Samsung C6712 is selected in the list of models
Click Resurrect button;
Wait few seconds until software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘SIM Swap’ keys and press Power-On.



http://www.jtagbox.com/wp-content/uploads/2011/11/samsung-gt-c6712-starii-duos-black-1.jpg

TUYHOA_GSM
16-12-2011, 10:45 PM
16.12.2011 Direct JTAG Access to Flash Memory Plugin v1.00

Details Here:- Memory Plugin v1.00 (http://forum.gsmhosting.com/vbb/f634/riff-jtag-direct-jtag-access-flash-memory-plugin-1399599/)


Bug Fix updates :-

ZTE_AC2746.dll
-------------------------------------
- ID 0x100F80E1 is addedd to allowed list


Samsung_S239.dll
-------------------------------------
- ID 0x100FA0E1 is addedd to allowed list


ZTE_MF180S.dll
-------------------------------------
- ID 0x401200E1 is addedd to allowed list


Samsung_B379.dll
-------------------------------------
- ID 0x220B30E1 is addedd to allowed list


Samsung_M820.dll
-------------------------------------
- ID 0x503E00E1 is addedd to allowed list


Samsung_S5570.dll
-------------------------------------
- ID 0x503C10E1 is addedd to allowed list

klmobile198
17-12-2011, 06:15 AM
16.12.2011 CDMA Motorola w210 supported
Resurrecting Motorola W210 is simple. Phone is auto powered on with charger connected; battery presence is not required. Pin TMODE has to be connected to GND in order to enable JTAG connection.
Please note, MSM6000 draws power from JTAG pins, thus board can be detected via JTAG even without any power supplied. But for successful resurrection the power (battery or charger) is required. Thus when resurrection is complete don’t forget to disconnect phone from RIFF BOX to de-power it completely.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0×0089/0×8855
To resurrect Motorola W210:


Solder JTAG cable to Motorola W210 JTAG pads;
Connect charger for auto power on or use battery;
Make sure Motorola W210 is selected in the list of models;
Click Resurrect button;
Choose which areas to flash;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

_
http://www.jtagbox.com/wp-content/uploads/2011/12/motorola_w210.jpg (http://www.jtagbox.com/wp-content/uploads/2011/12/motorola_w210.jpg)

anhlu2000
17-12-2011, 07:37 AM
http://www.jtagbox.com/wp-content/uploads/2011/12/motorola_w210.jpg

Cây này mà cung up làm gi nữa !

congtoan
20-12-2011, 02:16 PM
RIFF JTAG - Lenovo LePhone 3G W100 Unbrick – Boot repair supported
Whats new :

Added support for Lenovo LePhone 3G W100 Unbrick (http://www.jtagbox.com/jtag-news/riff-jtag-lenovo-lephone-3g-w100-unbrick-boot-repair-supported/)


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

Nhất Vũ
20-12-2011, 09:56 PM
20.12.2011 CDMA Haier C301R supported (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-haier-c301r-supported/)
Resurrecting Haier C301R is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x00EC/0x257E
To resurrect Haier C301R:


Solder JTAG cable to Haier C301R JTAG pads;
Insert USB Data cable into board and PC;
Make sure Haier C301R is selected in the list of models;
Click Resurrect button;
Choose which areas to flash;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

THUẬN-GSM
22-12-2011, 09:29 PM
22.11.2011 CDMA Huawei C2856 Supported


Added support for : Huawei C2856 (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-huawei-c2856-supported/)


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

klmobile198
24-12-2011, 06:15 PM
23.12.2011 RIFF JTAG - CDMA updates !

Added support for: CDMA Huawei C3500 Supported (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-huawei-c3500-supported/)

Added support for: CDMA Samsung B339 Breeze Supported (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-samsung-b339-breeze-supported/)

Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

Bug Fix updates

Samsung_I9100GX.dll (XLoader+)
-------------------------------------
- due to so many different and incompatible revisions of i9100G boards (H, 0G etc)
we temporarily removed boot.bin partition repair.

RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

THUẬN-GSM
28-12-2011, 01:51 AM
27.12.2011 CDMA Olive C2110 Supported

Added support for: CDMA Olive C2110 (http://www.jtagbox.com/jtag-news/riff-jtag-cdma-olive-c2110-supported/)


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

toilatoi142001
28-12-2011, 02:14 PM
RIFF JTAG - JTAG Manager Version 1.38, RIFF Box Firmware v1.29, Tegra 2 Support ! !

JTAG Manager Version 1.38, RIFF Box Firmware v1.29, Tegra 2 Support ! ! !

JTAG Manager
---------------------------

. Added feature to disable Target ID check during resurrection

. Added preset "Erase Full NAND/NOR Memory" (this use Settings by Code button)


Firmware 1.29
---------------------------




MPCore targets handling is improved.



Fixed bug in the ARM7 handling routines: h/w breakpoints were disabled each time any halt operation was performed

Added auxiliary instruction which improves GDB Server functionality.


Full Details here: Update News (http://forum.gsmhosting.com/vbb/8021004-post30.html)

Bug Fix

Samsung_I9100.dll (Exynos4210)
-------------------------------------
- Resurrection is full now (FBL, IBL and PBL loaders as was noted in previous version of DLL were not resurrected)
Now complete boot area is resurrected, which guarantees that phone will power on after resurrection (if no h/w damage).


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

klmobile198
29-12-2011, 02:58 PM
28.12.2011 Samsung Galaxy Note (GT-N7000) Unbrick – Dead Boot Repair supported
Samsung N7000 AP (PDA Part) is based on the S5PV310 (Exynos 4210) Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung N7000 AP:


Solder JTAG cable to Samsung N7000 AP JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung N7000 AP is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

_
http://www.jtagbox.com/wp-content/uploads/2011/12/samsung_galaxy_note.jpg (http://www.jtagbox.com/wp-content/uploads/2011/12/samsung_galaxy_note.jpg)

klmobile198
29-12-2011, 02:59 PM
28.12.2011 Direct JTAG Access to Flash Memory Plugin v1.01, TEGRA2 eMMC Supported
Whats new:



Added MSM6500
Added TEGRA2 eMMC controller #2 support
Added partition access selection for eMMC devices
Fixed AutoFlash Size bug for eMMC devices

Important info:
TEGRA 2 can be connected via CORTEX or ARM7 cores. In some cases, where CORTEX core is in sleep mode, it’s only possible to access ARM7 core, thus allowing access to shared memory space. Restoring Boot partitions via ARM7 core will enable access to CORTEX core after power reset.
Sample:
http://www.jtagbox.com/wp-content/uploads/2011/12/TEGRA2_ARM7.jpg (http://www.jtagbox.com/wp-content/uploads/2011/12/TEGRA2_ARM7.jpg)

klmobile198
30-12-2011, 02:02 PM
29.12.2011 Samsung Galaxy Note (GT-i9220) Unbrick – Boot Repair Supported
Samsung I9220 AP (PDA Part) is based on the S5PV310 (Exynos 4210) Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung I9220 AP:


Solder JTAG cable to Samsung I9220 AP JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung I9220 AP is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

_
http://www.jtagbox.com/wp-content/uploads/2011/12/samsung-i9220-galaxy.jpg (http://www.jtagbox.com/wp-content/uploads/2011/12/samsung-i9220-galaxy.jpg)

toilatoi142001
30-12-2011, 04:15 PM
RIFF JTAG - Samsung updates ! 29.12.2011 Samsung Galaxy Note (GT-i9220) Unbrick – Boot Repair Supported

Added support for: Samsung Galaxy Note (GT-i9220) Unbrick (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-note-gti9220-unbrick-boot-repair-supported/)


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

klmobile198
31-12-2011, 01:57 PM
30.12.2011 HTC Incredible S Unbrick, Unlock, CID, IMEI repair supported

Resurrecting HTC Incredible S is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Some (or all) revisions of HTC Incredible S boards have JTAG interface disabled (that is enable MARM JTAG Fuse is blown in the MSM7230 chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write PDA’s SPL version 1.13.0000. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG3213000’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE blown then there is no way to resurrect your phone via JTAG interface.
To resurrect HTC Incredible S:


Solder JTAG cable to HTC Incredible S JTAG pads;
Insert batter and connect USB Data cable;
Make sure HTC Incredible S is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

_
http://www.jtagbox.com/wp-content/uploads/2011/12/HTC-Incredible-S.jpg (http://www.jtagbox.com/wp-content/uploads/2011/12/HTC-Incredible-S.jpg)

gem38
31-12-2011, 09:35 PM
Happy new Year from RIFF JTAG ! First TEGRA2 based phone supported !
31.12.2011 A new Year gift ! Samsung GT-i9103 Galaxy Z / Galaxy R (TEGRA2) Boot repair / Unbrick (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-gt-i9103-galaxy-z-galaxy-r-boot-repair-unbrick/)

Resurrecting Samsung I9103 is easy.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inside; sometimes pressing Power On key during connection may be required. External power supply can be used too.
During some definite startup time (1…3 seconds) TEGRA2 chipsets are not detected via JTAG interface (this could be due to FUSE-d security): that is, on contrary to other devices, which being fused are detected via JTAG but non-haltable, TEGRA2 chipsets give ‘Nothing Detected’ response (though TCK-RTCK pair keeps functioning ok).
Please note: If during resurrection of dead unit the JTAG connection cannot be established (nothing is detected) then re-try with the NRST wire disconnected.
To resurrect Samsung I9103:

Solder JTAG cable to Samsung I9103 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Samsung I9103 is selected in the list of models;
Click Resurrect button;
If nothing is detected then try with NRST wire disconnected;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

RIFF Box – JTAG Revolution (http://www.jtagbox.com/)
Galaxy RulerZZZZZZZZZZZZ http://forum.gsmhosting.com/ubb/biggrin.gif

THUẬN-GSM
06-01-2012, 10:15 PM
Samsung Galaxy Fit (GT-S5670) Unbrick – Boot Repair supported

Added support for: 05.01.2012 Samsung Galaxy Fit (GT-S5670) Unbrick – Boot Repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-fit-gts5670-unbrick-boot-repair-supported/)


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

Guest™
10-01-2012, 07:07 PM
Samsung T759 is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in some cases it is possible that you will have to hold Power On key during initial connection.
In case after resurrection (after you have tried with both boot versions) the download mode is not initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.
To resurrect Samsung T759:


Solder JTAG cable to Samsung T759 JTAG pads;
Connect USB cable to phone and PC;
Attach battery connector;
Make sure Samsung T759 is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press Power-On.
http://www.jtagbox.com/wp-content/uploads/2012/01/samsung_sgh-t759_exhibit_4g.jpg

Nhất Vũ
11-01-2012, 10:23 PM
10.01.2012 Samsung GT-i8150 Galaxy W (Samsung Ancora) Unbrick – Boot repair supported
Resurrecting Samsung I8150 is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Please note, MSM8255T is dual core chipset – it has ARM11 and Qualcomm Scorpion cores. During power on sequence only ARM11 core is visible on the JTAG chain. If boots are not completely damaged and it comes up to initializing of the Scorpion core then Scorpion core appears on the JTAG chain too. This will shift ARM11 from TAP0 into TAP1 position on the chain, while current resurrector has the ARM11 core hardcoded at TAP0 position. Thus make sure to establish JTAG connection in the time range while Scorpion core is not visible yet.
To resurrect Samsung I8150:


Solder JTAG cable to Samsung I8150 JTAG pads;
Make sure Samsung I8150 is selected in the list of models;
Insert battery and connect USB Data cable;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

_
http://www.jtagbox.com/wp-content/uploads/2012/01/samsung_gt-i8150_galaxy_w.jpg (http://www.jtagbox.com/wp-content/uploads/2012/01/samsung_gt-i8150_galaxy_w.jpg)

Smart_Moto™
02-02-2012, 08:50 AM
HTC Inspire 4G A9192 (HTC Stallion) Unbrick, Boot, IMEI, CID, ModelID, Unlock supported

Resurrecting HTC Inspire is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Some (or all) revisions of HTC Inspire boards have JTAG interface disabled (that is enable MARM JTAG Fuse is blown in the MSM chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write PDA’s SPL version 0.85.0024. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD9812000’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE blown then there is no way to resurrect your phone via JTAG interface.

To resurrect HTC Inspire:


* Solder JTAG cable to HTC Inspire JTAG pads;
* Insert batter and connect USB Data cable;
* Make sure HTC Inspire is selected in the list of models;
* If you use only battery, press Power On key;
* Click Resurrect button;
* Wait till software signals a successful operation completion;
* Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.

To enter download mode:


* Disconnect PC cable;
* Insert battery;
* Hold ‘Volume Down’ key and press ‘Power ON’ button.


http://www.jtagbox.com/wp-content/uploads/2012/02/htc_inspire_4g.jpg

Smart_Moto™
03-02-2012, 08:21 AM
RIFF JTAG – HTC Panache/Glacier/My Touch 4G Unbrick, IMEI, CID, ModelID, Unlock supported (http://www.jtagbox.com/jtag-news/riff-jtag-htc-panacheglaciermy-touch-4g-unbrick-imei-cid-modelid-unlock-supported/)

HTC Panache/Glacier/My Touch 4G Unbrick, IMEI, CID, ModelID, Unlock supported
Resurrecting HTC Glacier is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Some (or all) revisions of HTC Glacier boards have JTAG interface disabled (that is enable MARM JTAG Fuse is blown in the MSM7230 chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write SPL version 0.86.0000. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD1510000’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE blown then there is no way to resurrect your phone via JTAG interface.
To resurrect HTC Glacier:


Solder JTAG cable to HTC Glacier JTAG pads;
Insert batter and connect USB Data cable;
Make sure HTC Glacier is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button. _
http://www.jtagbox.com/wp-content/uploads/2012/02/htc_panache.jpg (http://www.jtagbox.com/wp-content/uploads/2012/02/htc_panache.jpg)

Cuong_mobile
03-02-2012, 05:06 PM
HTC Panache/Glacier/My Touch 4G Unbrick, IMEI, CID, ModelID, Unlock supported (http://www.jtagbox.com/jtag-news/riff-jtag-htc-panacheglaciermy-touch-4g-unbrick-imei-cid-modelid-unlock-supported/)


Resurrecting HTC Glacier is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Some (or all) revisions of HTC Glacier boards have JTAG interface disabled (that is enable MARM JTAG Fuse is ****n in the MSM7230 chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write SPL version 0.86.0000. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD1510000’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE ****n then there is no way to resurrect your phone via JTAG interface.
To resurrect HTC Glacier:


Solder JTAG cable to HTC Glacier JTAG pads;
Insert batter and connect USB Data cable;
Make sure HTC Glacier is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;


Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button._
http://www.jtagbox.com/wp-content/uploads/2012/02/htc_panache.jpg (http://www.jtagbox.com/wp-content/uploads/2012/02/htc_panache.jpg)

Smart_Moto™
04-02-2012, 04:45 PM
Hello,
First, this is MAINLY for users with slow or bad internet connection. We have prepared torrent tracker and seed box, so hopefully users who experience problems with regular update download, can benefit from this.

Requirements :

- RIFF Box tracker account (http://tracker.riffbox.org/)
- Torrent client (http://www.utorrent.com/downloads/complete?os=win)
- Some free time to waste

Once You register and activate Your account, You can log in and browse torrents. At the moment, there is single torrent file, containing all current resurrectors DLL-s released by now.

Now, install uTorrent client (if You already don't have one) and do some settings first :

- Location of downloaded files : "C:\Program Files\RIFF Box JTAG Manager" (Or any other folder from where You run JTAG Manager exe)
- Open downloaded Torrent file and confirm download location
- Select files which You want to download

Keep in mind :

- JTAG Manager should be closed while You download files with torrent client
- Torrent client should be closed while You work with JTAG Manager

Since this is JUST test, things may not work well, so please report ANY kind of errors You may encounter.


PLEASE dont ask stupid questions, because I will make ugly jokes if You do so.

binharmani
08-02-2012, 09:23 PM
HTC Droid Incredible 2 ADR6350 Boot repair, Unlock, CID, ModelID, IMEI Update (http://www.jtagbox.com/jtag-news/riff-jtag-htc-droid-incredible-2-adr6350-boot-repair-unlock-cid-modelid-imei-update/)
(http://www.jtagbox.com/jtag-news/riff-jtag-htc-droid-incredible-2-adr6350-boot-repair-unlock-cid-modelid-imei-update/)


Resurrecting HTC Incredible 2 (Droid Incredible 2 ADR6350VW) is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Some (or all) revisions of HTC Incredible 2 boards have JTAG interface disabled (that is enable MARM JTAG Fuse is ****n in the MSM8655 chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write PDA’s SPL version 6.13.1002. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG3210***’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE ****n then there is no way to resurrect your phone via JTAG interface.

To resurrect HTC Incredible 2:

Solder JTAG cable to HTC Incredible 2 JTAG pads;
Insert batter and connect USB Data cable;
Make sure HTC Incredible 2 is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.

To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

_

http://www.jtagbox.com/wp-content/uploads/2012/02/htc_droid_incredible2.jpg (http://www.jtagbox.com/wp-content/uploads/2012/02/htc_droid_incredible2.jpg)

Smart_Moto™
10-02-2012, 08:48 AM
09.02.2012 Samsung Galaxy Precedent SCH-M828 Unbrick supported

Samsung M828 resurrection is simple. Phone is auto powered when USB Data Cable is inserted while battery is inside. If you don’t use USB cable, make sure to hold Power On button during JTAG connection establishing phase.
To resurrect Samsung M828 do this:

Solder JTAG cable to Samsung M828 JTAG pads;
Insert battery and connect USB cable to phone and PC;
Make sure Samsung M828 is selected in the list of models;
Click Resurrect button;
Wait few seconds until software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Camera’ keys and press Power-On to enter Download Mode;http://www.jtagbox.com/wp-content/uploads/2012/02/Samsung-Galaxy-Precedent-M828C-c.jpg

ATF
15-02-2012, 12:47 PM
14.02.2012 HTC ThunderBolt 4G ADR6400 (HTC Mecha) Unbrick – Boot repair supported (http://www.jtagbox.com/jtag-news/htc-thunderbolt-4g-adr6400-htc-mecha-unbrick-boot-repair-supported/)
Resurrecting HTC Thunderbolt CP (Modem Part) part is easy.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inside; sometimes during connection pressing Power On key may be required.
Please note, CP Part’s power is controlled by the AP Part, thus you may experience constant connection loses after definite ammounts of time (1-2-5-x seconds). If this keeps interferring the resurrection process, solder additionall JTAG interface cable to the AP pads, select AP resurrector DLL, go to the JTAG Read/Write page and halt AP core, then switch back to the CP JTAG interface.
To resurrect HTC Thunderbolt CP (Modem Part) Part:


Solder JTAG cable to HTC Thunderbolt CP JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC Thunderbolt CP is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;


Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
Resurrecting HTC Thunderbolt AP (PDA Part) is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.04.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG0510000’.
There is option to reflash BOOT and RECOVERY zones.
_
http://www.jtagbox.com/wp-content/uploads/2012/02/htc_thunderbolt.jpg (http://www.jtagbox.com/wp-content/uploads/2012/02/htc_thunderbolt.jpg)

ATF
18-02-2012, 06:29 AM
Samsung GT-P6200 Galaxy Tab 7.0 Plus Samsung P6200 is based on the S5PV310 (Exynos 4210) Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on._
http://www.jtagbox.com/wp-content/uploads/2012/02/samsung_galaxy_tab_70_plus_2.jpg (http://www.jtagbox.com/wp-content/uploads/2012/02/samsung_galaxy_tab_70_plus_2.jpg)
Huawei Ideos S7Resurrecting Huawei S7 is simple.
Connection can be established with charger connected while battery is inside. . .
.
http://www.jtagbox.com/wp-content/uploads/2012/02/huawei_ideos_s7.jpg (http://www.jtagbox.com/wp-content/uploads/2012/02/huawei_ideos_s7.jpg)
ZTE Light Tab (ZTE V9)Resurrecting ZTE V9 is easy. Phone is auto powered on with USB Data Cable connected. . .
_
http://www.jtagbox.com/wp-content/uploads/2012/02/zte_v9.jpg (http://www.jtagbox.com/wp-content/uploads/2012/02/zte_v9.jpg)
Orange Boston (Commtiva Z71)
Resurrecting the Orange Boston is easy. I requires 4.2v external power supply, and some basic soldering skills. . ..
http://www.jtagbox.com/wp-content/uploads/2012/02/orange_boston.jpg (http://www.jtagbox.com/wp-content/uploads/2012/02/orange_boston.jpg)

To download these new updates, You need to click “Check for Updates” button on Box Service TAB in RIFF JTAG Manager software.

klmobile198
18-02-2012, 06:29 AM
Some important news for today :

New updates:


Samsung GT-P6200 Galaxy Tab 7.0 Plus Unbrick/Boot repair

ZTE Light Tab (ZTE V9) Unbrick/Boot repair
Huawei Ideos S7 Unbrick/Boot repair
Orange Boston (Commtiva Z71) Unbrick/Boot repair
Samsung Galaxy TAB (P1000N) Unbrick/Boot repair
CDMA Samsung F219 Unbrick/Boot repair

Bug fixes:




QSC1100_X14_NOR,

QSC60XX_L18_D08_NOR,

QSC60XX_L20_D08_NOR,

QSC60XX_L24_D08_NOR

Have a nice weekend ! http://forum.gsmhosting.com/ubb/biggrin.gif


RIFF Box – JTAG Revolution (http://www.riffbox.org/)

gem38
24-02-2012, 11:55 PM
RIFF JTAG - Samsung YP-G70EW Galaxy S WiFi 5.0 Unbrick - Boot repair
So, again good news for RIFF users - make money before Your competitors do it ! http://forum.gsmhosting.com/ubb/biggrin.gif



24.02.2012 Samsung YP-G70EW Galaxy S WiFi 5.0 Unbrick (http://forum.gsmhosting.com/vbb/24.02.2012%20%20%20%20Samsung%20YP-G70EW%20Galaxy%20S%20WiFi%205.0%20Unbrick)


We rule the Galaxy ! http://forum.gsmhosting.com/ubb/biggrin.gif




www.jtagbox.coom

THUẬN-GSM
25-02-2012, 10:51 PM
25.02.2012 JTAG Manager 1.39 released

(http://www.jtagbox.com/jtag-news/riff-jtag-manager-v139-released-updates/)
Whats new:


Fixed bug which caused poping-up of ‘Out of Free Disk space’ window error while real error was just a failed HASH.
eMMC chip size is now represented not only in bytes but additionally, for visual convenience, in Mega/Giga bytes
Addres/Length fields on DCC Read/Write and JTAG Read/Write pages are changed into custom GUI representation: now 12(or 8)-digit hex values are shown in more human ‘readable’ way.
For more convenient work with the DCC Read/Write page features there was added standard lengths list, so user can set ‘human readable’ length value instead of manual typing of correct hexadecimal length value. For this just click combo box near Data Length field and select a desired length.

Example:
.
http://www.jtagbox.com/wp-content/up.../DCC_size2.jpg (http://www.jtagbox.com/wp-content/uploads/2012/02/DCC_size2.jpg)
Now its possible to select any value from 1MB to 16GB, plus, in case of writing file, You can simply use “File Size” to automatically read opened file size and use it’s length.
Added balloon hints to suggest what to do in case user has ‘DLL was not Accepted’ issue.
Selected resurrector DLL version is shown in logging windows now along with Model name, for example:
“Selected Resurrector: [NoName x1234 V1.00]“
Added “Search for DLL” button on the Resurrection page:
As RIFFBOX grows up on number of supported devices, searching visually through the big lists of supported models for a definite device name became a tiresome procedure.
Now user can search for required model simply typing part of model name in the search dialog (for this select “Search for DLL for this Model Name” and type some part of device name you’re looking for)

Example:
.
http://www.jtagbox.com/wp-content/up...12/02/name.jpg (http://www.jtagbox.com/wp-content/uploads/2012/02/name.jpg)
.
Besides this, there is feature to search for resurrectors compatible with specific IDCODE. For example, if you have a not supported device in hands with ID = 0xXXXXXXXX, you can search for DLLs which work with such ID and try to connect your device using one of such ‘compatible’ DLLs. (for this select “Search for DLL with same IDCODE” and type IDCODE you’re looking for)
Example:
.
http://www.jtagbox.com/wp-content/up.../02/IDCODE.jpg (http://www.jtagbox.com/wp-content/uploads/2012/02/IDCODE.jpg)

PLEASE NOTE!!! New resurrectors data base format is used in 1.39 version, thus
upon first start the JTAG MANGER WILL RESTART 1-5 TIMES in order to re-load and re-fresh all existing resurrector DLLs.


www.riffbox.org

minh_tri_bk
26-02-2012, 12:54 AM
News

RIFF JTAG – Direct Access Plugin 1.02 -World First! TEGRA2, S5PC100 eMMC Programming (http://www.jtagbox.com/jtag-news/riff-jtag-direct-access-plugin-102-world-tegra2-s5pc100-emmc-programming/)

by admin (http://www.jtagbox.com/author/admin/) on Feb.25, 2012, under News (http://www.jtagbox.com/category/jtag-news/)
25.02.2012 DirectProgramming.dll Version 1.02

Whats new:


Added MSM7627A eMMC controller #3 support
Added S5PC100/S5PC110 eMMC controllers #0..3 support
Added MDM9600 NAND Controller support
Addres/Length fields are changed into custom GUI representation:
now 12-digit hex values are shown in more human ‘readable’ way.

klmobile198
27-02-2012, 08:22 PM
27.02.2012 Samsung GT-P6800 Galaxy Tab 7.7 Unbrick – Boot repair supported, World First !
Samsung P6800 is based on the Exynos Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung P6800:


Solder JTAG cable to Samsung P6800 JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung P6800 is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.
http://www.jtagbox.com/wp-content/uploads/2012/02/samsung_galaxy_tab_7.7_front_menu.jpg (http://www.jtagbox.com/wp-content/uploads/2012/02/samsung_galaxy_tab_7.7_front_menu.jpg)


Qualcomm FullImage Files Plugin v1.05
Samsung i9000-like FullImage Files Plugin v1.03

Who rule the Galaxy ? ? ? http://forum.gsmhosting.com/ubb/biggrin.gif

Smart_Moto™
28-02-2012, 05:51 PM
Hello,
First, this is MAINLY for users with slow or bad internet connection. We have prepared torrent tracker and seed box, so hopefully users who experience problems with regular update download, can benefit from this.

Requirements :

- RIFF Box tracker account (http://tracker.riffbox.org/)
- Torrent client (http://www.utorrent.com/downloads/complete?os=win)
- Some free time to waste

Once You register and activate Your account, You can log in and browse torrents. At the moment, there is single torrent file, containing all current resurrectors DLL-s released by now.

Now, install uTorrent client (if You already don't have one) and do some settings first :

- Location of downloaded files : "C:\Program Files\RIFF Box JTAG Manager" (Or any other folder from where You run JTAG Manager exe)
- Open downloaded Torrent file and confirm download location
- Select files which You want to download

Keep in mind :

- JTAG Manager should be closed while You download files with torrent client
- Torrent client should be closed while You work with JTAG Manager

Since this is JUST test, things may not work well, so please report ANY kind of errors You may encounter.

If You need help or if You have any question/requests, please post here:

RIFF JTAG - Torrent Tracker public discussion (http://forum.gsmhosting.com/vbb/f634/riff-jtag-torrent-tracker-public-discussion-1426449/)


PLEASE dont ask stupid questions, because I will make ugly jokes if You do so. http://forum.gsmhosting.com/ubb/biggrin.gif

Smart_Moto™
29-02-2012, 08:11 AM
28.02.2012 RIFF JTAG Updates:

Whats new:



RIFF JTAG – Samsung SGH-i777 Galaxy S II Unbrick – Boot Repair supported, World First ! ! ! (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-sghi777-galaxy-ii-unbrick-boot-repair-supported-world/)
RIFF JTAG – Samsung GT-S7500 Galaxy Ace Plus Unbrick – Boot Repair supported, World First ! ! ! (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-gts7500-galaxy-ace-unbrick-boot-repair-supported-world/)

Come to the dark side, we'll rule the Galaxy ! http://forum.gsmhosting.com/ubb/biggrin.gif


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

minh_tri_bk
29-02-2012, 11:53 PM
29.02.2012 Samsung Wave 3 GT-S8600 Unbrick – Boot repair supported, World First ! ! !
Resurrecting Samsung S8600 is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Please note, MSM8255T is dual core chipset – it has ARM11 and Qualcomm Scorpion cores. During power on sequence only ARM11 core is visible on the JTAG chain. If boots are not completely damaged and it comes up to initializing of the Scorpion core then Scorpion core appears on the JTAG chain too. This will shift ARM11 from TAP0 into TAP1 position on the chain, while current resurrector has the ARM11 core hardcoded at TAP0 position. Thus make sure to establish JTAG connection in the time range while Scorpion core is not visible yet.
To resurrect Samsung S8600:


Solder JTAG cable to Samsung S8600 JTAG pads;
Make sure Samsung S8600 is selected in the list of models;
Insert battery and connect USB Data cable;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Menu’ keys and press ‘Power ON’ button.

klmobile198
01-03-2012, 05:55 AM
29.02.2012 JTAG Manager v1.40 Released
Whats new:



Solved the problem with download of updates. Now no more nasty ‘Out of Disk Space’ error!!!Some users could experience this kind of error during download of large files (30MB and more). These errors were often with Wi-Fi configurations where certain routers dind’t handled passive ports FTP data transfers properly.
Added check if JTAG Manager is running with administrator rights (in case it is installed in Program Files location).
This solves issues for older operating systems (Windows XP) which have no UAC and no manifest means controlling elevation of application rights. Thus – now if the JTAG Manager is started without administator rights it will restart itself with request to run it “as administrator”.
Embedded font for text message window on JTAG Read/Write page.
Improved displaying of DLL version information: If FileVersion info is available JTAG Manger will display it rather than the internal version supplied by DLL.
This simplifies version tracking for us.
Download speed limit is increased to 250kb/s

Please click “Check for Updates” button in order to download and apply new updates.

klmobile198
02-03-2012, 06:16 AM
RIFF JTAG – Samsung GT-S5360 Galaxy Y Unbrick – Boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-gts5360-galaxy-unbrick-boot-repair-supported/)


01.03.2012 Samsung GT-S5360 Galaxy Y Unbrick – Boot repair supported
Resurrecting Samsung S5360 is easy. To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.
In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.
To resurrect Samsung S5360:


Solder JTAG cable to Samsung S5360 JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung S5360 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Menu’ keys and press Power-On.
If nothing happens, try an alternative: hold both ‘Volume Up’ and ‘Menu’ keys and press Power-On.

.
http://www.jtagbox.com/wp-content/uploads/2012/03/Samsung-galaxy-young-s5360.jpg (http://www.jtagbox.com/wp-content/uploads/2012/03/Samsung-galaxy-young-s5360.jpg)
01.03.2012 RIFF JTAG – CDMA Updates (Samsung S189, B219, Alcatel OT255C)
Whats new:
Added full support for following models:


Alcatel OT255C (Boot repair, read/write flash)
Samsung S189 (Boot repair, read/write flash)
Samsung B219 (Boot repair, read/write flash)

Connection pinouts and repair instructions are also available, integrated into updates.

Smart_Moto™
06-03-2012, 08:31 PM
06.03.2012 RIFF JTAG – Samsung SGH-T499 Dart (Samsung Tass) Unbrick – Boot Repair supported
Repairing bricked Samsung T499 is easy with RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside. In case you use the battery only please note you will have to press Power On key once.
To resurrect Samsung T499:


Solder JTAG cable to Samsung T499 JTAG pads;
Make sure Samsung T499 is selected in the list of models;
Insert Battery into phone and connect USB cable (in case you not use USB cable, press once the Power ON key on the phone)
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Up’ and ‘Home’ keys and press ‘Power ON’ button. In few seconds phone enters download mode.

.
http://www.jtagbox.com/wp-content/uploads/2012/03/samsung_sgh-t499_dart.jpg (http://www.jtagbox.com/wp-content/uploads/2012/03/samsung_sgh-t499_dart.jpg)

Smart_Moto™
09-03-2012, 05:54 PM
http://www.gpgdragonsupport.com/ftppro/Banners2012/GPGJtag/2012-0305-gpgjtag123.jpg

Smart_Moto™
09-03-2012, 10:06 PM
Hello dear RIFF Box users !

Time to time we need help from our users, in order to improve our support and increase list of supported devices.

In this topic I'll post wanted stuff, so users who provide help here will have priority when they need support.

09.03.2012 IMPORTANT NEWS ! ! !

We made progress with 3rd generation of QUALCOMM CPU-s -MSM8260, MSM8660, APQ8060 and its variations.

Wanted worldwide,RIFF users with following WORKING models:



Samsung i9210
Samsung i727
Samsung i717
Samsung E110s
Samsung E160s
Samsung T989 - We already have access to both working and bricked units ! http://forum.gsmhosting.com/ubb/smile.gif

Any other Samsung model based on APQ8060, MSM8660 or MSM8260
HTC Shooter

If You have any of those models, and want to help us developing repair solutions, please contact me via Sonork or ICQ.


Requirements:




Digital camera
Decent internet connection speed
Decent English
RIFF Remote helper client (http://jtagbox.com/remote/RemoteParyPart108.rar)




If You have ONLY bricked/dead units, You can also contact me, so I can put You on queue list, in case that we need to perform any tests.

Please DO NOT ask "When will be ready", since we will release it as soon we finish everything.

Thank You.

PS

Who rules the Galaxy ? http://forum.gsmhosting.com/ubb/biggrin.gif

Dead phones needed for beta tests :


None for now http://forum.gsmhosting.com/ubb/smile.gif

Working phone full dumps :


Any

Phones needed in Ukraine, Kiev :

Any HTC Model, based on QUALCOMM MSM82xx CPU, in QHUSB_DLOAD mode (Error 0X44 on JTAG)
List of models:


HTC Desire HD
HTC Desire S
HTC Desire Z
HTC Sensation
HTC Inspire
Any other model based on MSM8255, MSM8260


Any Samsung model (Working or Bricked), based on QUALCOMM APQ8060 CPU

List of models:


Samsung i9210
Samsung i717
Samsung E160S
Samsung i727
Samsung T989
Samsung E110s

PCB Photos we need :



Any of not supported model !

Photos must be made in high resolution, if possible on daylight, without use of flash or artificial light.

Good photo sample :

http://www.jtagbox.com/downloads/manuals/Settings/i897_3_sample.jpg



If You can help for any of above mentioned requests, please contact me via Sonork or ICQ.

Smart_Moto™
12-03-2012, 10:16 PM
Resurrecting LG P350 is very hard because it requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).
Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board. To resurrect LG P350:


Solder JTAG cable to LG P350 JTAG pads;
Insert USB Data cable into board and PC;
Make sure LG P350 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods. We used KDZ_FW_UPD update software (with settings Type = 3GQCP, PhoneMode = EMERGENCY) to flash the *.KDZ firmware into phone.
To enter emergency mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume down’ key and press ‘Power ON’ button. In few seconds you should see emergency mode screen saying “DOWNLOAD MODE”.

.
http://www.jtagbox.com/wp-content/uploads/2012/03/lg_p350_optimus_me.jpg (http://www.jtagbox.com/wp-content/uploads/2012/03/lg_p350_optimus_me.jpg)

Smart_Moto™
13-03-2012, 06:35 PM
13.03.2012 RIFF JTAG - SonyEricsson new BOOTROM support and more (http://www.jtagbox.com/jtag-news/riff-jtag-sonyericsson-bootrom-support/)!


Whats new:
Unlock/Repair TA is now supported for new BOOTROM version in following models:


E15a (SE_E15a.dll),
E15i (SE_X8.dll),
U20a (SE_U20a.dll),
U20i (SE_U20i.dll),
E10i (SE_X10_Mini.dll)


HTC Neon Unbrick – Boot Repair, IMEI and CID update supported.


www.jtagbox.com (http://www.jtagbox.com/)

Smart_Moto™
14-03-2012, 08:05 PM
Repairing bricked HTC Sensation is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write PDA’s SPL version 1.18.0000. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG5813000’.
There is option to reflash BOOT and RECOVERY zones.
To resurrect HTC Sensation:


Solder JTAG cable to HTC Sensation JTAG pads;
Insert batter and connect USB Data cable;
Make sure HTC Sensation is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

.
http://www.jtagbox.com/wp-content/uploads/2012/03/HTC_Sensation.jpg (http://www.jtagbox.com/wp-content/uploads/2012/03/HTC_Sensation.jpg)

Smart_Moto™
14-03-2012, 08:16 PM
14.03.2012 RIFF JTAG – T-Mobile Samsung SGH-T989 Galaxy S II Unbrick – Dead Boot Repair supported, World First ! ! !
Repairing bricked Samsung T989 is easy with the RIFF Box. The device is based on the Qualcomm APQ8060 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung T989:


Solder JTAG cable to Samsung T989 JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung T989 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press Power-On.

.
http://www.jtagbox.com/wp-content/uploads/2012/03/samsung_galaxy_s_ii_hercules.jpg (http://www.jtagbox.com/wp-content/uploads/2012/03/samsung_galaxy_s_ii_hercules.jpg)

nhatkha
14-03-2012, 08:46 PM
RIFF JTAG – Samsung SGH-i727 Galaxy S II Skyrocket Unbrick – Dead Boot Repair, World First ! ! ! (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-sghi727-galaxy-ii-skyrocket-unbrick-dead-boot-repair-world/)

by admin (http://www.jtagbox.com/author/admin/) on Mar.14, 2012, under News (http://www.jtagbox.com/category/jtag-news/)
14.03.2012 RIFF JTAG – Samsung SGH-i727 Galaxy S II Skyrocket Unbrick – Dead Boot Repair, World First ! ! !
Repairing bricked Samsung I727 is easy with the RIFF Box. The device is based on the Qualcomm APQ8060 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung I727:


Solder JTAG cable to Samsung I727 JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung I727 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press Power-On.

.
http://www.jtagbox.com/wp-content/uploads/2012/03/samsung_galaxy_s_ii_skyrocket.jpg (http://www.jtagbox.com/wp-content/uploads/2012/03/samsung_galaxy_s_ii_skyrocket.jpg)

Smart_Moto™
14-03-2012, 08:55 PM
14.03.2012 RIFF JTAG – HTC EVO 3D (HTC Shooter) Unbrick – Boot Repair Supported, World First ! ! !
Repairing bricked HTC EVO 3D (PG86300) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write PDA’s SPL version 1.49.0007. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG8630000’.
There is option to reflash BOOT and RECOVERY zones.
To resurrect HTC EVO 3D:


Solder JTAG cable to HTC EVO 3D JTAG pads;
Insert batter and connect USB Data cable;
Make sure HTC EVO 3D is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

.
http://www.jtagbox.com/wp-content/uploads/2012/03/htc_evo_3d_4.jpg (http://www.jtagbox.com/wp-content/uploads/2012/03/htc_evo_3d_4.jpg)

Smart_Moto™
14-03-2012, 10:49 PM
14.03.2012 - New torrent, which contains all RIFF Box files with today's date is uploaded to RIFF Box Tracker.

Complete RIFF Box setup, 14.03.2012 (http://tracker.riffbox.org/download.php?torrent=26)

ngọc anh
15-03-2012, 09:03 AM
14.03.2012 - New torrent, which contains all RIFF Box files with today's date is uploaded to RIFF Box Tracker.

Complete RIFF Box setup, 14.03.2012 (http://tracker.riffbox.org/download.php?torrent=26):Danh em ai thấy chổ đăng ký ở đâu ko chỉ giúp với:D

Smart_Moto™
15-03-2012, 05:09 PM
Hello dear RIFF Box users !

Time to time we need help from our users, in order to improve our support and increase list of supported devices.

In this topic I'll post wanted stuff, so users who provide help here will have priority when they need support.

15.03.2012 Important - RIFF Box HUAWEI Phones Support

Wanted following Huawei Models:



U8110 (Dead)
U8120 (Dead)
U8150(Dead)
U8230(Dead)
U8300 (Dead)
U8510 (Dead)

U8650 (Working)

U8800 (Working)

U8860 (Working)
Any other Huawei model

If You have any of above mentioned models, please contact me via ICQ or Sonork for further steps.




Dead phones needed for beta tests :


Samsung T589
LG E510

Working phone full dumps :


LG E510

Phones needed in Ukraine, Kiev :

Any HTC Model, based on QUALCOMM MSM82xx CPU, in QHUSB_DLOAD mode (Error 0X44 on JTAG)
List of models:


HTC Desire HD
HTC Desire S
HTC Desire Z
HTC Sensation
HTC Inspire
Any other model based on MSM8255, MSM8260


Any Samsung model (Working or Bricked), based on QUALCOMM APQ8060 CPU

List of models:



Samsung i717
Samsung E160S
Samsung E110s

PCB Photos we need :



Any of not supported model !

Photos must be made in high resolution, if possible on daylight, without use of flash or artificial light.

Good photo sample :

http://www.jtagbox.com/downloads/manuals/Settings/i897_3_sample.jpg

klmobile198
17-03-2012, 07:32 AM
16.03.2012 RIFF JTAG updates:



Samsung GT-i9210 Galaxy S II LTE Unbrick - Dead Boot Repair (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-gti9210-galaxy-ii-lte-unbrick-dead-boot-repair-supported-world/)
QUALCOMM Partition Tool v1.06 (http://forum.gsmhosting.com/vbb/f634/riff-jtag-bug-fix-updates-1245731/index3.html#post8235992)
Galaxy Partition tool v1.04 (http://forum.gsmhosting.com/vbb/f634/riff-jtag-bug-fix-updates-1245731/index3.html#post8235992)

Bug fix updates:



HTC Sensation (PG85130) (http://forum.gsmhosting.com/vbb/f634/riff-jtag-bug-fix-updates-1245731/index3.html#post8238117)
HTC Evo 3D (HTC Shooter) (http://forum.gsmhosting.com/vbb/f634/riff-jtag-bug-fix-updates-1245731/index3.html#post8238117)





Who rules the Galaxy ? http://forum.gsmhosting.com/ubb/biggrin.gif



(http://www.jtagbox.com/)
www.jtagbox.com (http://www.jtagbox.com/)

Smart_Moto™
19-03-2012, 10:40 PM
19.03.2012 RIFF JTAG – HTC EVO View 4G Unbrick, Unlock, IMEI and CID update supported
Repairing bricked HTC EvoView4G is easy using RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected. Please note, battery presense is required.
Some (or all) revisions of HTC EvoView4G boards have JTAG interface disabled (that is enable MARM JTAG Fuse is blown in the MSM8255 chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write PDA’s SPL to 1.38.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG4120000’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE blown then there is no way to resurrect your phone via JTAG interface.
To resurrect HTC EvoView4G:


Solder JTAG cable to HTC EvoView4G JTAG pads;
Insert battery and connect USB Data cable;
Make sure HTC EvoView4G is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

.
http://www.jtagbox.com/wp-content/uploads/2012/03/htc_evo_view_4g.jpg (http://www.jtagbox.com/wp-content/uploads/2012/03/htc_evo_view_4g.jpg)

Guest™
21-03-2012, 06:07 PM
21.03.2012 RIFF JTAG – HTC Sensation XL X315 / Bass (HTC Runnymede) Unbrick, Unlock, IMEI and CID update supported

Repairing bricked HTC SensationXL (PI39200) is easy using RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Some (or all) revisions of HTC SensationXL boards have JTAG interface disabled (that is enable MARM JTAG Fuse is blown in the MSM8255 chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write PDA’s SPL to 1.25.0004 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG3920000’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE blown then there is no way to resurrect your phone via JTAG interface.
To resurrect HTC SensationXL:


Solder JTAG cable to HTC SensationXL JTAG pads;
Insert battery and connect USB Data cable;
Make sure HTC SensationXL is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

http://www.jtagbox.com/wp-content/uploads/2012/03/htc_sensation_xl.jpg

Smart_Moto™
23-03-2012, 04:53 PM
http://www.gpgdragonsupport.com/ftppro/Banners2012/GPGJtag/2012-03-23-gpgjtag123.jpg (http://forum.gpgindustries.com/downloads.php?do=file&id=5293)

Smart_Moto™
23-03-2012, 09:38 PM
Hello dear RIFF Box users !

Time to time we need help from our users, in order to improve our support and increase list of supported devices.

In this topic I'll post wanted stuff, so users who provide help here will have priority when they need support.

23.03.2012 Motorola Atrix MB860 hard brick wanted

If You have this model hardbricked, please contact me ASAP.
Please no time wasters.

15.03.2012 Important - RIFF Box HUAWEI Phones Support

Wanted following Huawei Models:



U8110 (Dead)
U8120 (Dead)
U8150(Dead)
U8230(Dead)
U8300 (Dead)
U8510 (Dead)

U8650 (Working)

U8800 (Working)

U8860 (Working)
Any other Huawei model

If You have any of above mentioned models, please contact me via ICQ or Sonork for further steps.




Dead phones needed for beta tests :


Samsung T589
LG E510

Working phone full dumps :


LG E510

Phones needed in Ukraine, Kiev :

Any HTC Model, based on QUALCOMM MSM82xx CPU, in QHUSB_DLOAD mode (Error 0X44 on JTAG)
List of models:


HTC Desire HD
HTC Desire S
HTC Desire Z
HTC Sensation
HTC Inspire
Any other model based on MSM8255, MSM8260


Any Samsung model (Working or Bricked), based on QUALCOMM APQ8060 CPU

List of models:



Samsung i717
Samsung E160S
Samsung E110s

PCB Photos we need :



Any of not supported model !

Photos must be made in high resolution, if possible on daylight, without use of flash or artificial light.

Good photo sample :

http://www.jtagbox.com/downloads/manuals/Settings/i897_3_sample.jpg

Smart_Moto™
23-03-2012, 11:24 PM
23.03.2012 RIFF JTAG – LG E510 Optimus Hub (LG Univa) Supported
Repairing bricked LG E510 with the RIFF Box is not very hard but it requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).
Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
To resurrect LG E510:


Solder JTAG cable to LG E510 JTAG pads;
Insert USB Data cable into board and PC;
Make sure LG E510 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods
To enter emergency mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume down’ key and press ‘Power ON’ button. In few seconds you should see emergency mode screen saying “DOWNLOAD MODE”.

.
http://www.jtagbox.com/wp-content/uploads/2012/03/lg_optimus_hub.jpg (http://www.jtagbox.com/wp-content/uploads/2012/03/lg_optimus_hub.jpg)

Smart_Moto™
27-03-2012, 10:12 PM
Repairing bricked Samsung SCH-I500 Galaxy S Mesmerize/Fascinate is easy with RIFF Box.
I500 is based on the S5PCxxx Processor (ARM core is Cortex-A8). Please note the adaptive clocking mode (RTCK) is not available on this processor, so make sure to select a fixed TCK frequency.
To establish the JTAG connection attach battery cable and press Power On key.
In case after resurrection the download mode is not initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.
To resurrect Samsung I500:


Solder JTAG cable to Samsung I500 JTAG pads;
Attach battery cable and press Power On key;
Make sure Samsung I500 is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
.
http://www.jtagbox.com/wp-content/uploads/2012/03/samsung_sch-i500_mesmerize.jpg (http://www.jtagbox.com/wp-content/uploads/2012/03/samsung_sch-i500_mesmerize.jpg)

F.Massa
28-03-2012, 01:35 PM
27.03.2012 RIFF JTAG – Samsung SCH-I500 Galaxy S Mesmerize/Fascinate Unbrick Supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-sch-i500-galaxy-s-mesmerizefascinate-unbrick-supported/)

http://forum.gsmhosting.com/vbb/8269478-post236.html (http://forum.gsmhosting.com/vbb/8269478-post236.html)



Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

Smart_Moto™
31-03-2012, 06:54 PM
RIFF JTAG – Samsung SHV-E120S Galaxy S II HD LTE (Samsung Celox) Unbrick – Dead Boot Repair supported
Repairing bricked Samsung E120S is easy with the RIFF Box. The device is based on the 2nd-generation Qualcomm MSM8660 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung E120S:


Solder JTAG cable to Samsung E120S JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung E120S is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press Power-On.

.
http://www.jtagbox.com/wp-content/uploads/2012/03/samsung_galaxy_s_ii_lte_hd.jpg (http://www.jtagbox.com/wp-content/uploads/2012/03/samsung_galaxy_s_ii_lte_hd.jpg)

klmobile198
31-03-2012, 07:53 PM
RIFF JTAG – Samsung SCH-i920 Omnia II 8GB Unbrick – Dead Boot repair supported (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-schi920-omnia-ii-8gb-unbrick-dead-boot-repair-supported/)


RIFF JTAG – Samsung SCH-i920 Omnia II 8GB Unbrick – Dead Boot repair supported

Repairing bricked Samsung I920 AP (PDA Part) is easy with RIFF Box. Due to some hardware pecularities, we recommend to use only battery without USB cable connected. Please note, during connection establishment phase you will have to press the Power On key twice.
To resurrect Samsung I920 AP:


Solder JTAG cable to Samsung I920 AP JTAG pads;
Make sure Samsung I920 AP is selected in the list of models;
Insert battery; make sure no USB cable or charger is connected;
Press the Power On key;
Click Resurrect button;
When it stops at “Establish communication with the phone…” press the Power On key again;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

To resurrect Samsung I920 CP:


Solder JTAG cable to Samsung I920 CP JTAG pads;
Make sure Samsung I920 CP is selected in the list of models;
Insert battery and connect USB cable or charger;
Wait till AP part boots up completely;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
http://www.jtagbox.com/wp-content/uploads/2012/03/samsung_sch-i920_omnia_ii_2.jpg (http://www.jtagbox.com/wp-content/uploads/2012/03/samsung_sch-i920_omnia_ii_2.jpg)

klmobile198
03-04-2012, 02:50 PM
02.04.2012 RIFF JTAG – HTC 7 Pro (HTC Gold) Unbrick, Unlock, IMEI and CID repair supported
Repairing bricked HTC 7 Pro is easy with RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Resurrector will re-flash radio’s boot zone and will re-write PDA’s SPL to 0.71.1000 or 0.00.1000 SPL version (depends on your choice). Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PC9210000’.
To resurrect HTC 7 Pro:


Solder JTAG cable to HTC 7 Pro JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC 7 Pro is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button. In few seconds you should see TriColor picture.

.
http://www.jtagbox.com/wp-content/uploads/2012/04/htc_7_pro.jpg (http://www.jtagbox.com/wp-content/uploads/2012/04/htc_7_pro.jpg)

RIFF JTAG – eMMC Partition Plugin v1.0 (Qualcomm EBR-MBR based eMMC flash images processing)
This plugin works with eMMC image files which have standard Master Boot Record (MBR) and Extended Boot Record (EBR) formatting. Most of eMMC-bootable mobile phones have their eMMC memory formatted in such style. In this case partitions are accessed in standard way, by Partition ID: for example boot loader partitions or OS image partition (compare with qualcomm MIBIB partitioning: while ‘MIBIB’-type partitions have standalone partition descriptor block which contains info on all partitions and is posistioned in a definite NAND address, the eMMC partitioning is one MBR sector at fixed position + a chain of EBR sectors which are scattered throughout the eMMC address space in a literally random way).
This plugin is a powerfull tool which enormously simplifies resurrection process (providing you have the required boot files from an official firmware or you have a ‘donor’ device) for those devices which are not yet supported by a dedicated resurrector DLL.
Please note, such phones as Samsung Exynos MCU based pohones (for example I9100, P6200, P6800, N7000, I9220 and etc), though have eMMC chip, are not partitioned in MBR way and thus are not the subject for the current plugin. These phones are to be processed by different plugin.
With the help of this plugin you can do:


Disassemble a full (or, since eMMC full image files are too large, a partial) eMMC Image File previously obtained with JTAG Manager (DCC Read/Write Page);
Inspect each partition contents;
Save separate partitions to HDD;
Save all partitions as standalone files to HDD;
Build-up your own full image file: for this you need to read from device (by clicking “Load Image from Device” button) or open from file (by clicking “Load Image from File” button) the eMMC partitioning data and then by selecting desired partitions click “Inject Into Partition” button to upload data from file into selected partition. Then you can save all full image file to HDD or flash injected partitions directly into device;
Write a chosen partition directly into device;
Read a chosen partition directly from device and substitute old partition contents to new ones;
Create eMMC partitioning snapshot (that is storing info on full EBR chain: each EBR sector position).
Restore eMMC partitioning from previously taken file: it is convenient if eMMC memory is erased and all formatting data is lost.
Plugin supports new RIFF™ shrinked binary files format (*.riffpbin): which allows to shrink huge eMMC Image files into small sized-files (for example, Image File for 14GB empty eMMC chip is shrinked into ~10 KByte(!) size), thus HDD space is preserved, while performance is not visibly effected.

Please note, direct read/write operations from/to the device will require proper resurrector to be set (Resurrector Settings: thus before clicking the Activate Plugin button make sure proper model is selected as well as other settings like TCK/RTCK frequencies).
.
http://www.jtagbox.com/wp-content/uploads/2012/04/eMMC_tool1-300x229.jpg (http://www.jtagbox.com/wp-content/uploads/2012/04/eMMC_tool1.jpg)

minh_tri_bk
04-04-2012, 12:24 AM
03.04.2012 RIFF JTAG – Samsung Galaxy Mini – GT-S5570i Unbrick – Boot repair supported
Repairing bricked Samsung S5570i is easy with RIFF Box. To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.
In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.
To resurrect Samsung S5570i:


Solder JTAG cable to Samsung S5570i JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung S5570i is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Menu’ keys and press Power-On.
If nothing happens, try an alternative: hold both ‘Volume Up’ and ‘Menu’ keys and press Power-On.

.
http://www.jtagbox.com/wp-content/uploads/2012/04/Samsung-Galaxy-Mini-S5570i.jpg (http://www.jtagbox.com/wp-content/uploads/2012/04/Samsung-Galaxy-Mini-S5570i.jpg)

minh_tri_bk
04-04-2012, 12:25 AM
03.04.2012 RIFF JTAG – Samsung GT-S5830i Unbrick – Boot Repair supported
Repairing bricked Samsung GT-S5830i is easy with RIFF Box. To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.
In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.
To resurrect Samsung S5830i:


Solder JTAG cable to Samsung S5830i JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung S5830i is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Menu’ keys and press Power-On.
If nothing happens, try an alternative: hold both ‘Volume Up’ and ‘Menu’ keys and press Power-On.

.
http://www.jtagbox.com/wp-content/uploads/2012/04/Samsung-Galaxy-Ace1.jpg (http://www.jtagbox.com/wp-content/uploads/2012/04/Samsung-Galaxy-Ace1.jpg)

THUẬN-GSM
06-04-2012, 10:20 PM
06.04.2012 RIFF JTAG Updates

Whats new:



RIFF JTAG Manager v1.42 (http://www.jtagbox.com/jtag-news/riff-jtag-mips32-support-riff-box-firmware-v132-riff-jtag-manager-v142-released/)
RIFF Box Firmware v1.32 (http://www.jtagbox.com/jtag-news/riff-jtag-mips32-support-riff-box-firmware-v132-riff-jtag-manager-v142-released/)

Network Router support:



LinkSys WRT54G (http://www.jtagbox.com/jtag-news/riff-jtag-lynksis-router-linksys-wrt54g-unbrick-supported/) Unbrick, Read/Write Flash

Satellite Receivers (STB-s):



Orton 4100C Unbrick, Read/Write Flash
EuroSky ES-4100 Unbrick, Read/Write Flash

HTC Phones support:


HTC Flyer (http://www.jtagbox.com/jtag-news/riff-jtag-htc-flyer-pg41100-unbrick-unlock-imei-soff-update-supported/) Boot repair, Unlock, CID, ModelID, S-Off, IMEI Update

HTC Phones bug fix and updates:


HTC Sensation (HTC Pyramid) S-Off support added
HTC Evo 3D (HTC Shooter) S-Off support added
HTC Desire HD DBL reflash support added

HTC Desire Z DBL reflash support added

RIFF Torrent Tracker updates:


06.04.2012 HTC_Working_Full_flash_Backups_06.04.2012_v2.torre nt (http://tracker.riffbox.org/download.php?torrent=37)

New HTC Full Backups torrent is uploaded and ready for seeding.

New files for following models: HTC 7 Pro (tested with hspl)
HTC Evo 3D (for Liteon camera)
HTC Desire HD (hboot 2.00 with fix for network problem)
HTC Sensation
HTC Kaiser
HTC Surround
HTC Incredible S

Complete list of files:

06.04.2012 Samsung_Full_flash_backups_06.04.2012_v2.torrent (http://tracker.riffbox.org/download.php?torrent=39)

New files for many new models added.

www.riffbox.org (http://www.jtagbox.com/)

minh_tri_bk
12-04-2012, 07:01 AM
Apr.11, 2012
RIFF JTAG – HTC Flyer WiFi (PG41400) Unbrick, S-off, CID update supported
Repairing bricked HTC Flyer WiFi (PG41400) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected. Please note, battery presense is required.
Some (or all) revisions of HTC Flyer boards have JTAG interface disabled (that is enable MARM JTAG Fuse is blown in the MSM8255 chip). In this case the JTAG may be enabled only by firmware itself. This is done by the DBL loader, so writing to DBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into DBL zone and will respond with success code as if flashing succeeded. In this way DBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except DBL area) and will re-write PDA’s SPL to 1.11.0011 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG4140000’.
There is option to reflash android BOOT and RECOVERY zones. Recovery zone is flashed with ClockworkMod Recovery 4.0.1.4. In addition, you can set S-OFF (unlock HBOOT so you will be able to flash any ROM) by selecting S-OFF HBOOT version in the resurrector settings.
Sometimes (for example after rooting attempts) phone has a modified DBL loader (which may not accept official HTC boot files). To restore phone functionality you need to reflash DBL loader. There is option to reflash DBL code (DBL area will be temporary unlocked for reflashing). But please note, reflashing DBL area is very dangerous, since in case flashing stops in the middle, you will have briked phone with permanently disabled JTAG interface.
Please note, if your phone has the DBL loader damaged and MCU has JTAG FUSE blown then there is no way to resurrect your phone via JTAG interface.
To resurrect HTC Flyer WiFi:


Solder JTAG cable to HTC Flyer JTAG pads;
Insert battery and connect USB Data cable;
Make sure HTC Flyer (PG41400) is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods. You can use CWM recovery to flash any ZIP file – for this during resurrection add BOOT & RECOVERY zones to be resurrected too.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

.
http://www.jtagbox.com/wp-content/uploads/2012/04/htc_flyer-1.jpg (http://www.jtagbox.com/wp-content/uploads/2012/04/htc_flyer-1.jpg)

klmobile198
25-04-2012, 06:18 AM
24.04.2012 RIFF JTAG – HTC via USB Cable Support added
Whats new:
Released support for HTC phones based on MSM8x55 CPU, which are enumerated on USB port as “QHUSB_DLOAD” device. Now it’s possible to repair these phones without soldering any wires. Even without opening !
Following models are supported at the moment:


HTC Desire HD (HTC Ace)
HTC Desire S (HTC Saga)
HTC Desire Z (HTC Vision)
HTC Flyer 3G
HTC Flyer WiFi
HTC Evo View 4G

It is possible to force QHUSB_DLOAD mode by disabling Vdd line on eMMC chip. Check Desire S TP info for example. This means, You can work with any MSM8255/MSM8655 based HTC phone, as long as You force it into QHUSB_DLOAD mode.
Follow this procedure if You want to use these updates:


Connect Your phone to USB port and install QHUSB_DLOAD device driver (C:\Program Files (x86)\RIFF Box JTAG Manager\Drivers\32Bit\QDLOADER)
Launch JTAG Manager, select appropriate Model DLL and click desired button
Install “RIFF Box DCCLoader USB Interface” port driver (C:\Users\Admin\Desktop\Drivers_64Bit_WorkedForMe\ Drivers\64Bit\DCCLDR)
If required, repeat the procedure (sometimes required if device is connected for first time)

We will release USB support for rest of the models on these CPU-s in following days.
To download and install new updates – simply click “Check for Updates” button on Box Service TAB.

ATF
25-04-2012, 12:33 PM
Hi,

Here are latest RIFF USB Drivers set:


RIFF Box 32/64 bit drivers
RIFF DCC USB Loader 32/64 bit drivers
RIFF QHUSB_DLOAD 32/64 bit drivers

Please download it, unpack, and in case that You have any phone in QHUSB_DLOAD mode, install appropriate driver.


Get ready.


http://www.jtagbox.com/downloads/RIF...24.04.2012.rar (http://www.jtagbox.com/downloads/RIFF_Drivers_32bit_64Bit_24.04.2012.rar)

Update has been release, so please use this thread for quick support related to latest RIFF update.

http://www.jtagbox.com/jtag-news/rif...support-added/ (http://www.jtagbox.com/jtag-news/riff-jtag-htc-usb-cable-support-added/)

Guest™
26-04-2012, 01:00 AM
https://rapidshare.com/files/1168981...Flash_tuna.zip (https://rapidshare.com/files/1168981527/OMAPFlash_tuna.zip)

Just execute *.bat file from this package.
Installing drivers first would be pretty smart idea too. http://forum.gsmhosting.com/ubb/smile.gif


Enjoy !

minh_tri_bk
27-04-2012, 09:13 PM
27.04.2012 RIFF JTAG – HTC via USB more phones supported

(http://www.jtagbox.com/jtag-news/riff-jtag-htc-usb-phones-supported/)


HTC Thunderbolt USB support added
HTC Sensation XL USB support added
HTC Inspire USB support added
HTC Incredible S USB support added
HTC Incredible 2 USB support added


These new updates will allow You to use USB cable to perform any operation on listed models. Remember that this work if Your phone is enumerated on USB port as QHUSB_Dload or Qualcomm HS-USB QDLoader device.
In case phone is not enumerated, You might need to use test point method first.
Please visit RIFF FAQ section in to see how to install drivers, and how to find eMMC Vdd test points:


How to install QHUSB_DLOAD driver (http://faq.riffbox.org/index.php?action=artikel&cat=3&id=4&artlang=en)
How to install “RIFF BOX DCCLoader USB Interface Port” Windows 7 64bit driver (http://faq.riffbox.org/index.php?action=artikel&cat=3&id=5&artlang=en)

If You need to repair phone after replacing eMMC chip, these are the steps:


Launch eMMC MBR/EBR partitioning tool
Open desired partitioning file
Click “Load Image from file”
Click “Repartition eMMC”
Close the eMMC plugin
Click “Resurrection” and select all options to be repaired, including IMEI and CID
Click “Resurrect”

http://www.jtagbox.com/wp-content/uploads/2012/04/HTC_full_repair.jpg (http://www.jtagbox.com/wp-content/uploads/2012/04/HTC_full_repair.jpg)

Please click “Check for updates” button to download and install new updates.

ATF
30-04-2012, 04:35 PM
RIFF Box JTAG Manager software setup

(http://www.riffbox.org/downloads/RiffSetup.exe)
This will install following files to Your computer:

JTAG Manager software v1.43
RIFF Box Firmware v1.32
RIFF Box control port driver
RIFF Box update port driver
RIFF DCC USBLoader driver
QUALCOMM QHUSB_DLOAD driver

After You execute setup, it will install all files to desired destination, and launch drivers installer script.
Take note, If You’re using Windows XP, You’ll have to provide drivers location to Hardware Installation Wizard after connecting devices for first time.

minh_tri_bk
05-05-2012, 12:14 AM
04.05.2012 RIFF JTAG – Samsung SGH-T679 Exhibit II 4G (Samsung Ancora) Unbrick – Dead Boot repair supported

Repairing bricked Samsung T679 is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Please note, MSM8255T is multi-core chipset – it has ARM11 and Qualcomm Scorpion cores. During power on sequence only ARM11 core is visible on the JTAG chain. If boots are not completely damaged and it comes up to initializing of the Scorpion core then Scorpion core appears on the JTAG chain too. This will shift ARM11 from TAP0 into TAP1 position on the chain, while current resurrector has the ARM11 core hardcoded at TAP0 position. Thus make sure to establish JTAG connection in the time range while Scorpion core is not visible yet.

To resurrect Samsung T679:


Solder JTAG cable to Samsung T679 JTAG pads;
Make sure Samsung T679 is selected in the list of models;
Insert battery and connect USB Data cable;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

.
http://www.jtagbox.com/wp-content/uploads/2012/05/samsung_sgh-t679_exhibit_ii_4g.jpg (http://www.jtagbox.com/wp-content/uploads/2012/05/samsung_sgh-t679_exhibit_ii_4g.jpg)

Smart_Moto™
11-05-2012, 04:48 PM
11.05.2012 RIFF JTAG – Samsung SPH-D710 Galaxy S2 Epic Touch 4G (Samsung Within) Unbrick – dead boot repair supported
Repairing bricked Samsung SPH-D710 Galaxy S2 Epic Touch 4G is easy with RIFF Box. Samsung SPH-D710 is based on the S5PV310 (Exynos 4210) Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung SPH-D710:


Solder JTAG cable to Samsung SPH-D710 JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung SPH-D710 is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.
http://www.jtagbox.com/wp-content/uploads/2012/05/samsung_sph-d710_epic_4g_touch.jpg (http://www.jtagbox.com/wp-content/uploads/2012/05/samsung_sph-d710_epic_4g_touch.jpg)

Smart_Moto™
19-05-2012, 12:48 AM
HTC_Sensation_PG58130.dll, HTC_Sensation4G_PG58100.dll, HTC_EVO3D_PG86300.dll
-------------------------------------
- added unlock
- temporarily, the WLAN partition is removed from the resurrection list, since sometimes it causes
camera/proximity sensors to malfunction


HTC_DesireHD.dll,HTC_DesireHD_USB.dll
-------------------------------------
- devices with HBOOT 2.xx version had troubles with network after IMEI change or unlock.
New data is used now to solve this problem.


HTC_WildfireS.dll
-------------------------------------
- changed MISC_MFG partition data for 2KB-paged NAND devices, since old one
caused some troubles with the proximity sensor.

minh_tri_bk
19-05-2012, 05:21 AM
Whats new:


Samsung B7320 unbrick/boot repair support added
HTC Sensation 4G (PG581000) Unbrick, Unlock, S-Off, SuperCID support added
HTC Sensation (PG581300/PG583101) Unlock support added
HTC Evo 3D Unlock support added


Bug Fix updates:


HTC Desire HD Support for new board revisions with hboot 2.xx (No Network problem)

HTC Wildfire S Proximity sensor fix


RIFF Torrent tracker:


RiffBox Setup 18.05.2012 v1 (http://tracker.riffbox.org/details.php?id=44&edited=1)


Please click “Check for updates” button in RIFF JTAG Manager to download new files.

RIFF Box FAQ:


RIFF JTAG Box FAQ - RIFF JTAG Error codes and troubleshooting (http://faq.riffbox.org/index.php?sid=11384&lang=en&action=show&cat=4)
RIFF JTAG Box FAQ - RIFF JTAG Box setup (http://faq.riffbox.org/index.php?action=show&cat=2)
RIFF JTAG Box FAQ - JTAG Manager - DCC Read/Write TAB (http://faq.riffbox.org/index.php?action=artikel&cat=9&id=59&artlang=en)
RIFF JTAG Box FAQ - How to use QUALCOMM eMMC MBR/EBR Partitioning plugin (http://faq.riffbox.org/index.php?action=artikel&cat=10&id=53&artlang=en)



www.jtagbox.com (http://www.jtagbox.com/)


http://forum.gsmhosting.com/vbb/images/buttons/report.gif (http://forum.gsmhosting.com/vbb/report.php?p=8423024) http://forum.gsmhosting.com/vbb/vbseo/resources/images/forum/digg.gif (http://digg.com/submit?phase=2&url=http%3A%2F%2Fforum.gsmhosting.com%2Fvbb%2Ff475 %2Friff-jtag-weekend-updates-1477276%2F%23post8423024&title=RIFF+JTAG+-+Weekend+Updates)http://forum.gsmhosting.com/vbb/vbseo/resources/images/forum/delicious.gif (http://del.icio.us/post?url=http%3A%2F%2Fforum.gsmhosting.com%2Fvbb%2 Ff475%2Friff-jtag-weekend-updates-1477276%2F%23post8423024&title=RIFF+JTAG+-+Weekend+Updates)http://forum.gsmhosting.com/vbb/vbseo/resources/images/forum/technorati.gif (http://technorati.com/faves/?add=http%3A%2F%2Fforum.gsmhosting.com%2Fvbb%2Ff47 5%2Friff-jtag-weekend-updates-1477276%2F%23post8423024)http://forum.gsmhosting.com/vbb/vbseo/resources/images/forum/facebook.gif (http://www.facebook.com/share.php?u=http%3A%2F%2Fforum.gsmhosting.com%2Fvb b%2Ff475%2Friff-jtag-weekend-updates-1477276%2F%23post8423024)http://forum.gsmhosting.com/vbb/vbseo/resources/images/forum/twitter.png (http://twitter.com/home?status=RIFF+JTAG+-+Weekend+Updates%20-%20http%3A%2F%2Fforum.gsmhosting.com%2Fvbb%2Ff475% 2Friff-jtag-weekend-updates-1477276%2F%23post8423024)http://forum.gsmhosting.com/vbb/vbseo/resources/images/forum/stumbleit.gif (http://www.stumbleupon.com/submit?url=http%3A%2F%2Fforum.gsmhosting.com%2Fvbb %2Ff475%2Friff-jtag-weekend-updates-1477276%2F%23post8423024&title=RIFF+JTAG+-+Weekend+Updates)

minh_tri_bk
23-05-2012, 05:44 PM
23.05.2012 RIFF JTAG – HTC 7 Surround T8788 (HTC Mondrian) Unbrick, Unlock, SuperCID and IMEI repair supported

Repairing bricked HTC Surround (PD26100) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.74.1000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD26*****’.
To resurrect HTC Surround (PD26100):


Solder JTAG cable to HTC Surround JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC Surround (PD26100) is selected in the list of models;
If you use battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

.
http://www.jtagbox.com/wp-content/uploads/2012/05/htc_7_surround.jpg (http://www.jtagbox.com/wp-content/uploads/2012/05/htc_7_surround.jpg)
Share! (http://goo.gl/rqtAe)



http://www.jtagbox.com/wp-content/plugins/post2ymess/post2ymess.png (ymsgr:im?+&msg=RIFF%20JTAG%20%E2%80%93%20HTC%207%20Surround%2 0T8788%20%28HTC%20Mondrian%29%20Unbrick,%20Unlock, %20SuperCID%20and%20IMEI%20repair%20supported%20%2 0http://www.jtagbox.com/jtag-news/riff-jtag-htc-7-surround-t8788-htc-mondrian-unbrick-unlock-supercid-imei-repair-supported/)

klmobile198
01-06-2012, 05:56 AM
31.05.2012 RIFF JTAG Updates

Whats new:



HTC One V T320e (HTC Primo) (http://www.jtagbox.com/jtag-news/riff-jtag-htc-t320e-htc-primo-unbrick-unlock-supercid-imei-repair-supported/) Unbrick/Dead Boot repair, Unlock, SuperCID, IMEI repair, via USB Cable, World First
Samsung SHV-E160K Galaxy Note LTE (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-shve160k-galaxy-note-lte-unbrick-dead-boot-repair-supported/) Boot Repair /eMMC Re-Partition


RIFF Torrent Tracker updates:


RiffBox Setup 31.05.2012 v1 (http://tracker.riffbox.org/download.php?torrent=46)



WWW.RIFFBOX.ORG (http://www.jtagbox.com)

minh_tri_bk
12-06-2012, 10:38 PM
12.06.2012 RIFF JTAG Updates

Whats new:


HTC Rhyme (HTC Bliss) (http://www.jtagbox.com/jtag-news/riff-jtag-htc-rhyme-htc-bliss-unbrick-unlock-supercid-imei-update-usb-supported/) Unbrick/Unlock/IMEI via USB Cable, World First

HTC Radar (HTC Omega) (http://www.jtagbox.com/jtag-news/riff-jtag-htc-radar-htc-omega-unbrick-unlock-supercid-and-imei-update-via-usb-cable-supported/)Unbrick/Unlock/IMEI via USB Cable, World First

Bug fixes:


HTC One V
Fixed bug with DBL partition causing phone to remain in QHUSB permanently.

RIFF Torrent Tracker:


RiffBox_Setup_12.06.2012_v1.torrent (http://tracker.riffbox.org/download.php?torrent=47)


www.riffbox.org (http://www.riffbox.org)

TrườngPhát™
23-06-2012, 09:38 AM
22.06.2012 RIFF JTAG Updates:

Whats new:



HTC Sensation XE PG5813001 (G18) (http://www.jtagbox.com/jtag-news/riff-jtag-htc-sensation-xe-pg5813001-g18-unbrick-unlock-soff-imei-repair-supported/)
.


Unbrick/Boot repair
S-Off
Unlock
IMEI Repair
SuperCid


Bug Fixes:


HTC_Sensation_PG58130.dll, HTC_EVO3D_PG86300.dll, HTC_Sensation4G_PG58100.dll
.


Fixed bug with damaged WLAN partition
Added WLAN partition check box in the resurrection settings dialog for optional WLAN zone resurrection (Use only in case when repairing erased or new eMMC)
Resurrection of mirrored-MISC partition is added (In some cases phone remain in recovery mode after failed update. This update solves this issue)


Torrent Tracker:


RiffBox Setup 22.06.2012 v1 (http://tracker.riffbox.org/download.php?torrent=49)



www.riffbox.org (http://www.riffbox.org/)

unlocker
21-07-2012, 01:00 AM
RIFF JTAG -Samsung Galaxy S3 (SGH-i747) Support and more 20.07.2012 RIFF JTAG Updates

Whats new:



Samsung SGH-i747 Galaxy S III LTE Unbrick / Boot repair supported, World First ! ! ! (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-sgh-i747-galaxy-s-3-lte-unbrick-boot-repair-supported-world-first/)
RIFF JTAG Manager v1.44 released (Added SnapDragon S4 MCU support (http://www.jtagbox.com/jtag-news/riff-jtag-manager-v144-riff-box-firmware-v133-released-qualcomm-snapdragon-s4-support/))
RIFF Box Firmware v1.33 released ( Read more (http://www.jtagbox.com/jtag-news/riff-jtag-manager-v144-riff-box-firmware-v133-released-qualcomm-snapdragon-s4-support/) )
QUALCOMM ESC6xxx Generic DLL released (Used in Motorola EX130, EX132)
QUALCOMM MSM7225A Generic DLL released (Used in HTC Pico, HTC Desire C, Samsung B5510 and more)

RIFF Torrent Tracker:


RiffBox_Setup_20.07.2012_v1.torrent (http://tracker.riffbox.org/download.php?torrent=52)



Who rules the Galaxy ? http://forum.gsmhosting.com/ubb/biggrin.gif


www.riffbox.org (http://www.jtagbox.com)

vuongkienmobile
11-09-2012, 01:36 PM
RIFF JTAG – Samsung SGH-A887 Unbrick – Dead boot repair
RIFF JTAG – Samsung SGH-A887 Unbrick – Dead boot repair
(http://www.jtagbox.com/jtag-news/riff-jtag-samsung-sgha887-unbrick-dead-boot-repair/)




Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution (http://www.jtagbox.com/)

KACHIUSA317
12-09-2012, 03:08 PM
RIFF JTAG – Samsung Update

RIFF JTAG – Samsung SHV-E160L Galaxy Note LTE Unbrick – Boot repair (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-shve160l-galaxy-note-lte-unbrick-boot-repair/)


RIFF JTAG – Samsung SHV-E120L Galaxy S II HD Unbrick – Dead boot repair (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-shve120l-galaxy-ii-hd-unbrick-dead-boot-repair/)


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

Thiếu Tá
15-09-2012, 09:03 AM
RIFF JTAG - Updates summary
RIFF JTAG current week updates summary:

Whats new:


RIFF JTAG -Huawei Ideos X1 U8180 (Huawei Gaga) Unbrick – Dead Boot repair « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-huawei-ideos-x1-u8180-huawei-gaga-unbrick-dead-boot-repair/)
RIFF JTAG – Samsung GT-S7500L Galaxy Ace Plus Unbrick – Dead Boot repair « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-gts7500l-galaxy-ace-unbrick-dead-boot-repair/)
RIFF JTAG – Samsung GT-S6102 Galaxy Y Duos Unbrick – Dead Boot repair « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-gts6102-galaxy-duos-unbrick-dead-boot-repair/)
RIFF JTAG – Samsung SHV-E120L Galaxy S II HD Unbrick – Dead boot repair « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-shve120l-galaxy-ii-hd-unbrick-dead-boot-repair/)
RIFF JTAG – Samsung SHV-E160L Galaxy Note LTE Unbrick – Boot repair « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-shve160l-galaxy-note-lte-unbrick-boot-repair/)
RIFF JTAG – Samsung SGH-A887 Unbrick – Dead boot repair « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-sgha887-unbrick-dead-boot-repair/)
Torrent tracker:

RiffBox_Setup_14.09.2012_v1.torrent (http://tracker.riffbox.org/download.php?torrent=57)
WWW.JTAGBOX.COM (http://www.jtagbox.com/)

NoName
05-10-2012, 08:22 AM
03.10.2012 Samsung SGH-iT999 Galaxy S 3 Unbrick – Dead Boot Repair supported
Repairing bricked Samsung T999 is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung T999:


Solder JTAG cable to Samsung T999 JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung T999 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press Power-On.

http://www.jtagbox.com/wp-content/uploads/2012/10/samsung_gt-i9300_galaxy_s_iii_5.jpg

linhkiengiasi
05-10-2012, 08:44 AM
phải chi anh tamansu là bây giờ thì ko vất vả rồi :D

hungthinhmobile
12-10-2012, 05:31 PM
RIFF JTAG - Week Updates Summary So, whats new for this week ?

New models:


RIFF JTAG – Samsung SGH-L760 Unbrick – Boot Repair Supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-sghl760-unbrick-boot-repair-supported/)
RIFF JTAG – Samsung SCH-E329I Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-sche329i-unbrick-dead-boot-repair-supported/)
RIFF JTAG – CoolPad 5860 + Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-coolpad-5860-unbrick-dead-boot-repair-supported/)
RIFF JTAG – Samsung Galaxy K SHW-M130K Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-shwm130k-unbrick-dead-boot-repair-supported/)
RIFF JTAG – Samsung GT-S5830G Galaxy Ace Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-gts5830g-galaxy-ace-unbrick-dead-boot-repair-supported/)
RIFF JTAG – Samsung GT-S6500 Galaxy Mini 2 (Samsung Jena) Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-samsung-gts6500-galaxy-mini-2-samsung-jena-unbrick-dead-boot-repair-supported/)

Useful Plugins:


PIT-partitioned eMMC-based Samsungs FullFlash Image Files Processing Plugin v1.00
(Galaxy S2, Galaxy S3 models (i9100, i9100G, N7000, I747, I747M, T999, T999v etc)
With this plugin You can easy handle EFS partitions in order to repair baseband problems.
eMMC Partition Table FullFlash Image Files Processing Plugin (eMMCDiskPartitions.dll) v1.02
-------------------------------------
- Added some Samsung partitions names to the list (based on Samsung phones with new MSM7xxxxA chips).

Read more about plugin usage at RIFF Box FAQ page:
RIFF JTAG Box FAQ - How to use QUALCOMM eMMC MBR/EBR Partitioning plugin (http://faq.riffbox.org/index.php?action=artikel&cat=10&id=53&artlang=en)


Torrent tracker:


RiffBox_Setup_12.10.2012_v1.torrent (http://tracker.riffbox.org/download.php?torrent=59)



www.jtagbox.com (http://www.jtagbox.com)

NoName
03-11-2012, 11:37 AM
02.11.2012 RIFF JTAG – HTC Flyer 4G P515E Unbrick, IMEI, SuperCID, ModelID repair supported

Repairing bricked HTC Flyer4G (PG4130000) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected. Please note, battery presense is required.
Some (or all) revisions of HTC Flyer4G (PG4130000) boards have JTAG interface disabled (that is enable MARM JTAG Fuse is blown in the MSM chip). In this case the JTAG may be enabled only by firmware itself. This is done by the DBL loader, so if DBL area is damanged and MCU has JTAG Disable FUSE blown then there is no way to resurrect your phone via JTAG interface. However, in this case you may use HTC Flyer4G (PG4130000) USB DLL version which does not require JTAG interface and does resurrection procedure via USB cable.
Resurrector will reflash radio’s boot zone (except DBL area) and will re-write PDA’s SPL to 1.14.0001 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG413****’

To resurrect HTC Flyer:


Solder JTAG cable to HTC Flyer JTAG pads;
Insert battery and connect USB Data cable;
Make sure HTC Flyer4G (PG4130000) is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods. You can use CWM recovery to flash any ZIP file – for this during resurrection add BOOT & RECOVERY zones to be resurrected too.
To enter download mode:


Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button

http://www.jtagbox.com/wp-content/uploads/2012/11/htc_flyer_2.jpg

hungthinhmobile
10-11-2012, 01:12 PM
RIFF JTAG – LG F-160S Optimus LTE2 Unbrick – Dead Boot Repair Supported 09.11.2012 RIFF JTAG – LG F-160S Optimus LTE2 Unbrick – Dead Boot Repair Supported
Repairing bricked LG F160S is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect LG F160S:


Solder JTAG cable to LG F160S JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure LG F160S is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
.
http://www.jtagbox.com/wp-content/uploads/2012/11/f160s.png (http://www.jtagbox.com/wp-content/uploads/2012/11/f160s.png)

Torrent tracker:
RiffBox_Setup_09.11.2012_v1.torrent (http://tracker.riffbox.org/download.php?torrent=66)

unlocker
11-11-2012, 04:57 AM
RIFF JTAG - Week Updates Summary Whats new this week:

New Models:


RIFF JTAG – LG F-160S Optimus LTE2 Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-lg-f160s-optimus-lte2-unbrick-dead-boot-repair-supported/)
RIFF JTAG – LG F-160L Optimus LTE2 Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-lg-f160l-optimus-lte2-unbrick-dead-boot-repair-supported/)
RIFF JTAG – LG F-160K Optimus LTE2 Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-lg-f160k-optimus-lte2-unbrick-dead-boot-repair-supported/)
RIFF JTAG – Pantech Sky Vega LTE EX IM-A820L Ubrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-pantech-sky-vega-lte-ima820l-ubrick-dead-boot-repair-supported/)
RIFF JTAG – Pantech Sky Vega LTE IM-A800s Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-pantech-sky-vega-lte-ima800s-unbrick-dead-boot-repair-supported/)
RIFF JTAG – Pantech SKY Vega RACER IM-A760S Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-pantech-sky-vega-racer-ima760s-unbrick-dead-boot-repair-supported/)
RIFF JTAG – Pantech Sky Vega T100K Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-pantech-sky-vega-t100k-unbrick-dead-boot-repair-supported/)
RIFF JTAG – LG C660 Optimus Pro Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-lg-c660-optimus-pro-unbrick-dead-boot-repair-supported/)
RIFF JTAG – HTC Flyer 4G P515E Unbrick, IMEI, SuperCID, ModelID repair supported « RIFF Box – JTAG Revolution (http://www.jtagbox.com/jtag-news/riff-jtag-htc-flyer-4g-p515e-unbrick-imei-supercid-modelid-repair-supported/)

Torrent tracker:


RiffBox_Setup_09.11.2012_v1.torrent (http://tracker.riffbox.org/download.php?torrent=66)